}

Tender For Construction Of 40 Th Number Anganwadi, Ernakulam-Kerala

Grama Panchayat has published Tender For Construction Of 40 Th Number Anganwadi. Submission Date for this Tender is 22-09-2025. Construction Material Tenders in Ernakulam Kerala. Bidders can get complete Tender details and download the document.




Tender Notice

51162954
Tender For Construction Of 40 Th Number Anganwadi
Tender
Indian
Kerala
Ernakulam
22-09-2025
BootCamp

Tender Details

Tender For Construction Of 40 Th Number Anganwadi-- 1 Supply of Materials 2 Stone Aggregate(single size): 40 mm nominal size 3 Stone Aggregate(single size):20 mm nominal size 4 Coarse sand (zone III) 5 Portland Cement 6 Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper 7 Vibrator (Needle type 40 mm) 8 Sundries 9 wall form panel 1250x500 mm 10 Corner angle 45x45x5 mm 1.50 m long 11 100 mm channel shoulder 2.5 m long 12 Double clip (bridge clip) 13 Single clip 14 M.S. Tube 40 mm dia 15 Structural steel such as tees, angles, channels and R.S. joists 16 Red oxide Zinc chromate primer 17 Adjustable telescopic prop 3 m (2.02-3.75m) 18 Beam clamp 300-380 mm (450-1070 mm) 19 Wall form panel 1250x450xmm 20 Corner angle 45x45x5 mm 2.50 long 21 Column clamp 450x1070 mm 22 Prop 2 m (2-3.5m) 23 Stone Aggregate(single size): 10 mm nominal size 24 Royalty for good earth 25 Adjustable span ESO+SI (2.35-3.40) 26 Twisted steel/deformed bars 27 Solid blocks of size 30x20x20cm 28 Solid blocks of size 30x20x15cm 29 Solid blocks of size 40x20x10cm 30 Anjili wood scantls 31 Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm 32 Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm 33 Bright finished or black enameled mild steel screws 40 mm 34 Bright finished or black enameled mild steel screws 20 mm 35 Anjili wood planks 36 Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) 37 Mild Steel round bar above 12 mm dia 38 Flats up to 10 mm in thickness 39 Rawl plug 50 mm (designation 10 nos) 40 48 mm X40 mmX1.5 mm thick Factory made door frame of PVC extruded sections in white, grey or wooden finish 41 24 mm thick Factory made shutters with styles, rails and panels of PVC extruded sections in white, grey or wooden finish 42 Fine sand (zone IV) 43 Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black 44 Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc. 45 Vitrified floor tile 60x60 cm 46 Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre 47 Plastic emulsion paint 48 Synthetic enamel paint in black or chocolate shade 49 Black plastic seat (soild) with lid C.P.brass hinges and rubber buffers 50 Vitreous china pedestal type wate closet 51 Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe) 52 One piece European Water Closet S concealed 510 X 295 X 520 mm with seat cover and fittings 53 Vitreous China flat back wash basin 630x450 mm 54 15 mm C.P.brass tap 55 C.P. brass waste 32 mm 56 C.I. bracket for wash basin and sinks 57 Vitreous china flat back wash basin 550x400 mm 58 Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm 59 Brass bib-cock-15 mm dia 60 PVC pipe 50 mm outer dia.6kgf/cm2 61 PVC pipe 110 mm outer dia. 4kgf/cm2 62 PVC bend 110 mm dia 63 S.W. gully trap type 100x100 mm 64 C.I. Grating 100x100 mm 65 C.I. Cover and frame 300X300 mm inside 66 Common burnt clay F.P.S. (non modular) bricks class designation 7.5 67 PVC vent cowl 110 mm dia 68 Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings 69 PVC pipe 63 mm outer dia . 6kgf/cm2 70 PVC pipe 15 mm outer dia 10kgf/cm2 71 Polyethylene water storage tank with cover and suitable locking arrangemnet 72 Material - 75 mm valve 73 Oxidised mild steel tower bolt (barrel type) 200x10 mm 74 Oxidised mild steel screws 30 mm 75 Iron hooks & eyes 100 mm 76 Brass mortice latch and lock 100 x 65 mm with6 levers and a pair of brass lever handles 77 Anodised Aluminium hanging type door stopper 78 Chromium plated Brass screws 25 mm 79 PTMT - Towel Rail (600 mm) 80 Second class teak wood in scantling 81 Float Valve 20mm with Rod 82 Mild steel tubes hot finished welded type 83 Welding by electric plant 84 Boulder 50 mm to 200 mm

Key Value

Document Fees
INR 3375 /-
Tender Value
INR 12.25 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail