Tender For Construction Of Christian Community Centre At Nandok, Gangtok District.
Tender Value
22.50 Crore
Estimated cost
Bid Submission
13 Oct 2025
0 days left
EMD
56.25 Lakhs
Bank guarantee accepted
Document Fee
5 Lakhs
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
gangtok → Sikkim
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Christian Community Centre At Nandok, Gangtok District.
BOQ
| Sl. No. | Item Description |
| 1 | Drawing of 1.1 kv power supply in under ground cable |
| 2 | 6.6kv/11kv insulated armoured cable with aluminium conductor of 3*50 sqmm confirming to IS 7098 |
| 3 | Rigid U PVC pipe as per IS 4985-2000 working pressure 6Kgf/CM2(Finolex) 75mm dia |
| 4 | Heat shrinkable outdoor type End termination kit for 6.35 kv (Uo)/11kv (U) 3 core XLPE (KIT NO . EOKT 3332-3382) |
| 5 | Safe Earthing Model T-19short time current 20KA rms for 1 sec (LV/MV) application 50mm*3 mtrs Electrode & Two bag bakfill chemical compound |
| 6 | Excavation of 0.45*0.90*1.00 mtrs cable trench in mix soil & re-filling with available excavated earth & providing cement concrete on the top of the trench. |
| 7 | Erection @ 15% |
| 8 | Transportation @ 10% |
| 9 | B)-Installation of 63 KVA,11/0.43 KV outdoor type distributiontransformer. |
| 10 | 9 mtrs. steel lattice structure of 35x35x6mm M.S angle complete with nuts and bolt conferming to specification of design detail no. 2/L/FT/E$PD/9 mtrs. |
| 11 | Guy Assembly complete with 7/10 SWG Stay Wire, 140x85 mm H.T Guy Insulator, 18mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 300x300x6mm anchor plate |
| 12 | 11 KV, 3 Pole, 200 Amps, Air break G.O.S tilting type, three insulators per phase complete with all fittings confirming to IS: 9920 & IS: 9921 (porcelian/Polymer). |
| 13 | 11 KV, 3 Pole 200Amps, D.O.F unit complete with all accessories confirming to IS: 9385(porcelian/Polymer). |
| 14 | 9 KV, 10 KA Single pole unit Metal Oxide Gapless Surge Arrestor for 11 KV, 50 c/s solidly earthed neutral system conforming to IS:3070 (Part III) Raychem RPG make or equivalent |
| 15 | 63 KVA, 11/0.433KV Copper wound 50 HZ, Dyn 11, 3 phase, ONAN cooled, Outdoor type Distribution Transformerwith off-circuit tapping +2.5%, +5%, on H.V side with bare bushing on HV & LV side and provided with standard fitting and accessorise with first filling of transformer oil conforming to IS:1180(PART-I)2014:Energy efficiency level -2. |
| 16 | Safe earthing model t-19 short time current 20KA rms 1sec(LV/MV) with 50mm diameter x 3 mtrs. Electrode and two bags backfill chemical compound. |
| 17 | Safe earthing model t-39 short time current 50KA rms 1sec(EHV) with 80mm diameter x 2 mtrs. Electrode and two bags backfill chemical compound. |
| 18 | M.S Channel ISLC 100 (100x50x6.4mm) SAIL Brand conforming to IS: 808 |
| 19 | M.S. Channel ISLC75 75x40x6mm long for supporting lines, GOS, D.O. Fuse etc. |
| 20 | Back Clamps 75 x 8 mm flat |
| 21 | M.S. Nuts & bolts 16m dia 40 mm full thread. |
| 22 | 1.1 KV PVC/XLPE insulated Heavy Duty Power cable for working voltage upto & including 660/1100 Volts cone Alm. Conductors armoured, 3.5 x 150 sqmm from Transformer to Panel. |
| 23 | HEAT SHRINKABLE L.T 1.1 KV INDOOR / OUTDOOR END TERMINATION KIT FOR PVC/ XLPE CABLES 2,3 &1/2 CORE (DENSION): a) 3.5 x 25 sqmm |
| 24 | G.I Strips 20x4 mm of 1 Mtr length |
| 25 | Danger board 11000 Volts. |
| 26 | Danger board 440 Volts. |
| 27 | G.I. Barbed wire. |
| 28 | Al. paint (Nerolac ) |
| 29 | ACSR Weasel Conductor 30 sqmm, 6/2.59+1/2.59 |
| 30 | L.T distribution switch board with copper bus bar, out-door type Kiosk, having electrolytic annealed copper bus bar 50x12mm for phase & 50x6mm for neutral circuits mounted on glazed porcelain or Bakelite base & fitted with voltmeter, ammeter, selector switches for ammeter & voltmeter, electronic KWH meter, indicating lamps cabin light, fabricated with 12 gauge M.S plain sheet, painted with anti- rust primer & two coats of Epoxy paint of shade 631 as per IS: 8623-1, front opening doors with gasket & locking arrangement complete with following incoming & outgoing controls: INCOMING:1 No. 100AMP, 4P,50 KA MCCBOUTGOING: 3 Nos. 63A TP MCCB, 35 KA, & 1 No. 32A TP MCCB, 35 KA all with built in Thermo Magnetic Release. |
| 31 | Fencing for 63 KVA pole mounted distribution sub-station of size 3x3 mtrs.constructed with 50x50x5mm M.S angle vertical props, 35x35x6mm M.S angle supports(double run), M.S wire mesh, 50x6mm M.S flat iron for clamping wire mesh complete with gate with locking arrangement, site development, concreting of props in 1:2:4 cc i/c soling & flooring works in 1:4:8 cc. |
| 32 | TOTAL COST OF MATERIALS |
| 33 | Placement of L.T Distribution Board on parapet of size 2x0.61x0.35x0.61 mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix. |
| 34 | Concreting of 9 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.75 mtrs Pit, Construction of parapet 0.61 x 0.61x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix. |
| 35 | Concreting of HT Guy assembly in 1:4:8 cc in 0.40x0.40x1.05 mtrs pit. |
| 36 | Erection @ 15% |
| 37 | Transportation @ 10% |
| 38 | A)-INSTALLATION OF 11KV (OH LINE) |
| 39 | 9 mtrs. steel lattice structure of 35x35x6mm M.S angle complete with nuts and bolt conferming to specification of design detail no. 2/L/FT/E$PD/9 mtrs. |
| 40 | Guy Assembly complete with 7/10 SWG Stay Wire, 140x85 mm H.T Guy Insulator, 18mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 300x300x6mm anchor plate |
| 41 | 11 KV, 3 Pole, 200 Amps, Air break G.O.S tilting type, three insulators per phase complete with all fittings confirming to IS: 9920 & IS: 9921 (porcelian/Polymer). |
| 42 | 11 KV, 3 Pole 200Amps, D.O.F unit complete with all accessories confirming to IS: 9385(porcelian/Polymer). |
| 43 | 11 KV, 45KN T/C type disc insulator |
| 44 | Complete hardware for DISC insulator for weasel conductor |
| 45 | Safe earthing model t-39 short time current 50KA rms 1sec(EHV) with 80mm diameter x 2 mtrs. Electrode and two bags backfill chemical compound. |
| 46 | M.S. Channel ISLC75 75x40x6mm long for supporting lines, GOS, D.O. Fuse etc. |
| 47 | M.S. Nuts & bolts 16m dia 40 mm full thread. |
| 48 | G.I. Barbed wire. |
| 49 | Al. paint (Nerolac ) |
| 50 | ACSR Weasel Conductor 30 sqmm, 6/2.59+1/2.59 |
| 51 | Back Clamps 75 x 8 mm flat |
| 52 | Concreting of 9 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.75 mtrs Pit, Construction of parapet 0.61 x 0.61x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix. |
| 53 | Concreting of HT Guy assembly in 1:4:8 cc in 0.40x0.40x1.05 mtrs pit. |
| 54 | Erection @ 15% |
| 55 | Transportation @ 10% |
| 56 | INTERNAL ELECTRIFICATION Internal Wiring |
| 57 | Wiring for light/Fan/Call bell & 6 A plug point with 2x1.5 sqmmFRLSHPVC insulated copper conductor single core cable in best quality recessed alkathine pipe and earthing the point with 1x 1.5 sqmmHR FRLS PVC insulated copper conductor single core cable as required. |
| 58 | Wiring for sub-main for light/fan/call bell & 6 amps plug points with 2x 2.5 sqmmFRLSH PVC insulated copper conductor single core cable in best quality recessed alkathine pipe and earthing the point with 1x2.5 sqmm FRLSH PVC insulated copper conductor single core cable as required. |
| 59 | Wiring for 16 A plug point with 2x 2.5 sqmmFRLSH PVC insulated copper conductor single core cable in best quality recessed alkathine pipeand earthing the point with 1x 2.5 sqmmFRLSH PVC insulated copper conductor single core cable as required. |
| 60 | Wiring for sub-main for 16 amps (2x1000W) plug points with 2x4.0 sqmm FRLSHPVC insulated copper conductor single core cable in best quality recessed alkathine pipeand earthing the point with 1x4.0 sqmm FRLSH PVC insulated copper conductor single core cable as required. |
| 61 | Supplying & fixing conduct inspection bend 1/2\",3/4\" |
| 62 | Supplying & fixing conduct inspection Tee 1/2\",3/4\" |
| 63 | Switch Socket & Accessories |
| 64 | Supplying & fixing 06 amps 1 way FT switch on white moduler plate and metal flux box including connection etc. as required. |
| 65 | a) 2 no.06 amps FT switch with 2 no white 2 moduler plate and 2 moduler metal flux box. |
| 66 | (c)3 no. 06 amps FT switch with 1 no white 3 moduler plate and 3 moduler metal flux box. |
| 67 | (c)4 no. 06 amps FT switch with 1 no white 4 moduler plate and 4 moduler metal flux box. |
| 68 | (d)6 no. 06 amps FT switch with 1 no white 6 moduler plate and 6 moduler metal flux box. |
| 69 | (e)8 no. 08 amps FT switch with 1 no white 8 moduler plate and 8 moduler metal flux box. |
| 70 | Supplying & fixing 1 no 06 amps socket with 1 no 06 amps switch, 1 no. 3 module plate white plate & 1 no. 3 module metal flux box) including connection etc. as required. |
| 71 | Supplying & fixing 1 no. 16 amps socket, & 16 amps switch,white plate (6/8 module) & Metal flux box (4 module)includingconnection etc. as required. |
| 72 | Light Fitting & Accessories |
| 73 | Supplying & fixing surface LED fitting 12 watts including connection etc. as required |
| 74 | Supplying & fixing LED wall mounting mirror light including connection etc. as required. |
| 75 | Supplying, installation, testing & commissioning of ceilingfan 1200mmincluding connection etc as required. |
| 76 | Supplying, installation, testing & commissioning of ventilating fan 250mmincluding connection etc as required. |
| 77 | Supplying & fixing wall lamp fitting with LED lamp including connection etc as required. |
| 78 | Earthing & Distribution System |
| 79 | Supplying & installation of MCB distribution board double door including connection etc as required. |
| 80 | a) 4 ways SPN (Double Door ) |
| 81 | b) 8 ways SPN (Double Door ) |
| 82 | Supplying & fixing MCBs (Legrand or equivalent) |
| 83 | a) 4 pole MCCB 63 Amp, 415V |
| 84 | b) DP |
| 85 | b) SP 06-16Amps, 230V |
| 86 | Providing & laying 8 SWG cu wire from main dist. Pannel to earth electrode of the building |
| 87 | Providing ,laying, testing & commisionning of 1.1 KV grade PVC insulated aluminium armoured conductor cable on surface of the wall of the building with required size of aluminium shadle and screw etc. as required. a) 3.5 core 70 sqmm |
| 88 | Providing & installing Copper tube type 1m long lightning arrestor having prongs at the top of the arrestor and base plate with nuts & bolts. |
| 89 | Providing & earthing 2mtrs long ASHLOK make encapsulated pipe system (Pipe in pipr technology) maintenance free safe earthing electrode model T19, outer dia of pipe 50mm & inner dia 25mm & 1 bag back fill chemical compound) |
| 90 | Supplying,installation,testing & commissioing of copper Bus-bar Chamber a) 4 pole 200 Amps. |
| 91 | Supplying,installation,testing& commisiong of ON/OFF Load Changeover switch ( conforming To CPWD/NBC/Relevant IS&BIS code) a) Four Pole 100 amps/415V |
| 92 | Three PhaseMeter 10-60 Amp |
| 93 | L.T PANEL |
| 94 | L.T . Distribution Switch Board , outdoor type kiosk, 200 Amps, having electrolytic annealed copper bus, bar 50x12mm for phase & 50x6mm for neutral circuits mounted on glazed porcelain or bakelite base and fittted with voltmeter , ammeter , selectorswitchs for ammemeter & voltmeter , electronic KWH meter , indicating lamps, cabin light , fabricatrd with 12 gauge M.S . plain sheet , pained with anti rust primer & two coats of Epoxy paint of sade 631 as per IS:5, front & back opening doors with Gasket and locking arrengement complete with following incoming and outgoing controls dimensions as per drawing No.3/DP/E&PD/63A.Incoming: 1No.200A,415V,FB MCCB breaking capacity 25 KA with built in Thermo MagneticRelease.Outgoing: 2 Nos. 100A TP MCCB breaking capacity 35 KA with built in Thermo Magnetic Release having Relay setting 16-25A.1 No. 32 ATP MCCB breaking capacity35 KAA with built in Thermo Magnetic Releasehaving Relay setting 16-25A.. |
| 95 | 1.1 KV grade PVC insulated aluminium armoured conductor cable(Havells make)i )3.5 25 sqmm 1.1KV grade PVC insulated aluminium armoured conductor cable. |
| 96 | Rigid U PVC pipe as per IS 4985-2000 working pressure 6Kgf/CM2(Finolex) 50mm dia. |
| 97 | Three phase electronic meter. |
| 98 | Total cost of materials |
| 99 | Excavation of 0.45x0.90x1.0m cable trench in mix soil & re-filling with available excavated earth and providing cement on the top of the trench. |
| 100 | Erection @ 15% |
| 101 | Transportation @ 10% |
| 102 | INTERNAL ELECTRIFICATION Internal Wiring |
| 103 | Wiring for light/Fan/Call bell & 6 A plug point with 2x1.5 sqmmFRLSHPVC insulated copper conductor single core cable in best quality recessed alkathine pipe and earthing the point with 1x 1.5 sqmmHR FRLS PVC insulated copper conductor single core cable as required. |
| 104 | Wiring for sub-main for light/fan/call bell & 6 amps plug points with 2x 2.5 sqmmFRLSH PVC insulated copper conductor single core cable in best quality recessed alkathine pipe and earthing the point with 1x2.5 sqmm FRLSH PVC insulated copper conductor single core cable as required. |
| 105 | Wiring for 16 A plug point with 2x 2.5 sqmmFRLSH PVC insulated copper conductor single core cable in best quality recessed alkathine pipeand earthing the point with 1x 2.5 sqmmFRLSH PVC insulated copper conductor single core cable as required. |
| 106 | Wiring for sub-main for 16 amps (2x1000W) plug points with 2x4.0 sqmm FRLSHPVC insulated copper conductor single core cable in best quality recessed alkathine pipeand earthing the point with 1x4.0 sqmm FRLSH PVC insulated copper conductor single core cable as required. |
| 107 | Supplying & fixing conduct inspection bend 1/2\",3/4\" |
| 108 | Supplying & fixing conduct inspection Tee 1/2\",3/4\" |
| 109 | Switch Socket & Accessories |
| 110 | Supplying & fixing 06 amps 1 way FT switch on white moduler plate and metal flux box including connection etc. as required. |
| 111 | (a)1 no. 06 amps FT switch with 1 no white 1 moduler plate and 1 moduler metal flux box. |
| 112 | (c)3 no. 06 amps FT switch with 1 no white 3 moduler plate and 3 moduler metal flux box. |
| 113 | (d)4 no. 06 amps FT switch with 1 no white 4 moduler plate and 4 moduler metal flux box. |
| 114 | (e)6 no. 06 amps FT switch with 1 no white 6 moduler plate and 6 moduler metal flux box. |
| 115 | (f)8 no. 08 amps FT switch with 1 no white 8 moduler plate and 8 moduler metal flux box. |
| 116 | Supplying & fixing 1 no 06 amps socket with 1 no 06 amps switch, 1 no. 3 module plate white plate & 1 no. 3 module metal flux box) including connection etc. as required. |
| 117 | Supplying & fixing 1 no. 16 amps socket, & 16 amps switch,white plate (6/8 module) & Metal flux box (4 module)includingconnection etc. as required. |
| 118 | Light Fitting & Accessories |
| 119 | Supplying & fixing LED tube light fitting 22 watts 4ft including connection etc as required. |
| 120 | Supplying & fixing surface LED fitting 12 watts including connection etc. as required |
| 121 | Supplying & fixing LED wall mounting mirror light including connection etc. as required. |
| 122 | Supplying, installation, testing & commissioning of ceilingfan 1200mmincluding connection etc as required. |
| 123 | Supplying, installation, testing & commissioning of ventilating fan 250mmincluding connection etc as required. |
| 124 | Supplying & fixing wall lamp fitting with LED lamp including connection etc as required. |
| 125 | Earthing & Distribution System |
| 126 | Supplying & installation of MCB distribution board double door including connection etc as required. |
| 127 | a) 4 ways SPN (Double Door ) |
| 128 | b) 8 ways SPN (Double Door ) |
| 129 | Supplying & fixing MCBs (Legrand or equivalent) |
| 130 | a) 4 pole MCCB 63 Amp, 415V |
| 131 | b) DP |
| 132 | b) SP 06-16Amps, 230V |
| 133 | Providing & laying 8 SWG cu wire from main dist. Pannel to earth electrode of the building |
| 134 | Providing ,laying, testing & commisionning of 1.1 KV grade PVC insulated aluminium armoured conductor cable on surface of the wall of the building with required size of aluminium shadle and screw etc. as required. a) 3.5 core 150 sqmm |
| 135 | b) 3.5 core 120 sqmm |
| 136 | Providing & installing Copper tube type 1m long lightning arrestor having prongs at the top of the arrestor and base plate with nuts & bolts. |
| 137 | Providing & earthing 2mtrs long ASHLOK make encapsulated pipe system (Pipe in pipr technology) maintenance free safe earthing electrode model T19, outer dia of pipe 50mm & inner dia 25mm & 1 bag back fill chemical compound) |
| 138 | Supplying,installation,testing & commissioing of copper Bus-bar Chamber a) 4 pole 063 Amps. |
| 139 | Supplying,installation,testing& commisiong of ON/OFF Load Changeover switch ( conforming To CPWD/NBC/Relevant IS&BIS code) a) Four Pole 100 amps/415V |
| 140 | Three PhaseMeter 10-60 Amp |
| 141 | L.T PANEL |
| 142 | L.T . Distribution Switch Board , outdoor type kiosk, 100 Amps, having electrolytic annealed copper bus, bar 50x12mm for phase & 50x6mm for neutral circuits mounted on glazed porcelain or bakelite base and fittted with voltmeter , ammeter , selectorswitchs for ammemeter & voltmeter , electronic KWH meter , indicating lamps, cabin light , fabricatrd with 12 gauge M.S . plain sheet , pained with anti rust primer & two coats of Epoxy paint of sade 631 as per IS:5, front & back opening doors with Gasket and locking arrengement complete with following incoming and outgoing controls dimensions as per drawing No.3/DP/E&PD/63A.Incoming: 1No.100A,415V,FB MCCB breaking capacity 25 KA with built in Thermo MagneticRelease.Outgoing: 2 Nos. 40A TP MCCB breaking capacity 35 KA with built in Thermo Magnetic Release having Relay setting 16-25A.1 No. 32 ATP MCCB breaking capacity35 KAA with built in Thermo Magnetic Releasehaving Relay setting 16-25A.. |
| 143 | 1.1 KV grade PVC insulated aluminium armoured conductor cable(Havells make)i )3.5 25 sqmm 1.1KV grade PVC insulated aluminium armoured conductor cable. |
| 144 | Rigid U PVC pipe as per IS 4985-2000 working pressure 6Kgf/CM2(Finolex) 50mm dia. |
| 145 | Three phase electronic meter. |
| 146 | Total cost of materials |
| 147 | Excavation of 0.45x0.90x1.0m cable trench in mix soil & re-filling with available excavated earth and providing cement on the top of the trench. |
| 148 | Erection @ 15% |
| 149 | Transportation @ 10% |
| 150 | INSTALLATION OF DG SET AND UPS. |
| 151 | D.G SET 160KVA DG SET WITH LIQUID COOL ENGINE MODEL 6K1080ETA WITH STANDARD CONTROL PANEL |
| 152 | ONLINE UPS CONFORMING TO IEC 62040-1-1,IEC 60950 |
| 153 | i) 30 KVA /360 V,3 phase in-1 Phase out |
| 154 | BATTERY & CABINET CONFORMING TO IS: 1652& IEC 60950-1 |
| 155 | 12 volt 150 AH battery |
| 156 | 11/11 kv (U) XPLE INSULATED ARMOURED CABLE WITH ALUMINIUM CONDUCTOR CONFORMING TO IS:7098/11/85. |
| 157 | 3.5 core* 150 sqmm |
| 158 | Safe earthing model T-39 Short current 50KA RMS for 1 sec(ENV) Application conforming To IS: 3043. |
| 159 | 80 mm diameter * 2mtr Electrode (copper bondle) & One bag backfill chemical compound. |
| 160 | Erection & Transportation @ 25% |
| 161 | MULTI-PURPOSE HALL |
| 162 | Excavation in soil in hilly area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 1000 metres. |
| 163 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 164 | Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete. (Mechanical Means) |
| 165 | Providing & Layingin position cement concrete of 1 : 3 : 6(1 cement, 3 coarse sand, 6 graded stone aggregate of 20 mm and down size) including compacting curing etc. all complete. |
| 166 | Filling inside plinth in building works with 23 cm layers, consolidated to 15cm including watering, ramming etc. all complete. |
| 167 | Filling with available excavated earth in trenches, plinth and side of foundation in building works with layers not exceeding 20cm in depth including consolidation of each layer by ramming, watering etc, all complete. |
| 168 | Providing and LayingRandom Rubble Stone Masonry wall with hammer dressed with bond stone, through stone of size 150mm x 150mm x 450mm manufactured in 1:4:8 (1cement, 4 clean coarse sand, 8 clean hard stone aggregate of size 40 mm and down) clean hard selected stone, including centering aligning and slopes/curves etc,completeas per the direction of Engineer in Charge. |
| 169 | Providing and Laying damp proof coarse 40 mm thick with cement concrete 1:2:4 ( 1 cement, 2 Clean coarse sand, 4 graded stone aggregate 12.5 mm & nominal size) as per the direction of Engineer in Charge. |
| 170 | Providing and Laying in position 1:1.5:3 Mix (1cement, 1.5 coarse sand 3 graded stone aggregate 20mm and down nominal gauge) of reinforced cement concrete excluding the cost of form work, finishing and reinforcements. |
| 171 | Providing, fixing and removing form work for casting R.C.C items as indicated below: (with locally available timber) |
| 172 | Foundation, footings, base of column etc. for mass concrete. |
| 173 | Square columns |
| 174 | Form work for beam, lintels, girders, brersumers & cantilevers. |
| 175 | Floor slab, roof slab, landing, balcony & access platform. |
| 176 | wall |
| 177 | Supplying, bending and placing in position ofTor steelreinforcement in all R.C.C works i/c cost of binding wires all complete. |
| 178 | Providing and Laying first class brick work in one brick thick in superstructureof standard size bricks with 1:5 cement mortar (1cement and 5 clean coarse sand) as per the direction of Engineer in Charge includingcuring etc all complete. |
| 179 | Providing and laying first class brick work in half brick thick in superstructure of standard size bricks with 1:4 cement mortar(1 cement and 4 coarse sand)including carriage of bricks upto work site and curing etc. all complete. |
| 180 | Providing and laying 12 mm thick cement plaster of 1:3 mix in single coat including finishing even & smooth and curing etc. all complete. |
| 181 | Providing & Laying white or colored glazed vitrified tiles of Orient / Somani or equivalent colourin flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 182 | Providing and Laying white or colored glazed tilesanti skid ( elegant, cashmere, Egyptian rustic, celebrity, lara etc or equivalent) of glossy series or celebrity, elegant or equivalentin flooring, treads of steps landing etc of size 300mm x 300mm laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 183 | Providing and Laying white or colored or ceramic glazed tiles of size 200mm x 300mm Special colour(black, burgundy, pink, midnight blue, alpine blueor equivalent) in skirting, risers of steps and Dados on 12mm thick cement plaster (1cement, 3coarsed sand) 1:3 bare and jointed with white cement slurry. |
| 184 | Providing and Laying marble stone slabs 20mm thick marble stone slabs flooring of size not less than 1.0 sqm of20mm thick laidover 20mm(average)1:4cm thick bare laid cement concrete and joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete (Raj nagar Plain Marble / Udaipur green marble or equivalent) |
| 185 | Providing, fitting and fixing of dressed local timber (tooni, katus equivalent) in all types of frames complete. |
| 186 | Providing, fitting and fixing water proof flush door shutters, solid block hard core construction with frame of 1st class hard timber with well matched 3mm teak ply decorative type on one faces of the shutters including hinges with screws complete. |
| 187 | P/F/F in position of fully glazed shutters in windows and doors of champ wood or equivalent including steel butt hinges, screws, 3mm glass panes of modi guard or equivalent etc complete. |
| 188 | Providing hold fast of (40x5)mm flat iron including fixing to frame with 10mm dia. Bolts nuts and timber plugs and embedding in CC 1:3:6 ( 1 cement, 3 coarse sand, 6 graded stone aggregate 2omm nominal size) block of size (30x10x15)cm. as per the direction of Engineer - in- Chargeall complete: |
| 189 | Providing and fixing Brass bright finished brass butt hinges with necessary screws etc. complete. |
| 190 | Providing and fixing tower bolts 300x10mm (Barrel type) with necessary screws etc complete. |
| 191 | Providing, fitting and fixing. sliding door bolts with nuts and screws etc. complete. |
| 192 | Providing and fixing 100mm mortise lock with 6 levers and pair of handles with necessary screws etc complete. |
| 193 | Providing, fitting and fixing 38mm flooring in sal timber over a frame of sal timber excluding the cost of polishingand including cost of one coat priming on the base frame complete. |
| 194 | Providing and fixing anodized aluminum works for doors, windows, ventilators and partitions with extruded built up standard tubular or other section of approved make confirming IS 733 and IS 1285,fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners i/c necessary filling up the gaps at junctions, at top, bottom and sides with required PVC / neoprene felt, etc. Al. section shall be smooth, rust free, straight, mitered and joined mechanically wherever required i/c cleat angle, Al snap beading for glazing / paneling CP brass / stainless screws,all complete as per design and drawings and the direction of the Engineer - in - Charge. |
| 195 | Providing and fixing prelaminated sheet three layer medium density (exterior grade) particle board grade - I type - II confirming IS 12823 bonded with phenol formaldehyde synthetic resin of approved brand and manufacture in panelling fixed in Aluminium doors, wndows, shutters and partition frames with CP brass / stain less steel screws etc. complete as per architectural drawings and direction of Engineer - in- Charge. |
| 196 | Providing and fixing glazing in Al. doors and windows ventilaor shutters and partitions etc. with PVC / neosprene gasketwith CP brass / stain less steel screws etc. complete as per architectural drawings and direction of Engineer - in- Charge. |
| 197 | Providing and laying plaster of paris putty of 2mm thick over plastered surface to prepare the surface even and smooth all complete: |
| 198 | Providing and Providing and painting with plastic Emulsion paints two or more coats on New surface of required shade to give an even shade including brushing the surface clean of all dirt dust and smoothened by sand paper etc complete. |
| 199 | Providing and Providing and painting with acrylic exterior paints of quality and make equivalent to EXCEL, WEATHER SHIELD to give an even shade including brushing the surface clean of dirt, dust etc and sand papering and filling the scratches complete on New surface. |
| 200 | Providing and fixing M.S round or square bars at required spacing in timber frames of windows as per the direction of Engineer - in- Chargeall complete. |
| 201 | Providing / Fitting / Fixing 6mm thick ply false ceiling /paneling inwooden frames of timberpanisazor equivalent, excluding the cost of polishing and including cost of one coat priming onunexposed frame all complete. |
| 202 | Providing and applying priming coat with ready mixed Red oxide, Zinc chromate primer on steel / galvanized Iron steel works including preparation of the surface complete. |
| 203 | Providing and painting with ready mixedpaint of approved quality and shade with two or more coats to give an even and smooth shade including clearing the surface complete on new surface. |
| 204 | Providing box drain of 30 cm (ht) x 45 cm (width) internal dimension with 1:2:4 Plum concrete (20mm & down) inside walls thickness of 23 cm (hill side) and 30 cm (road side)and 1:3:6 (20 mm & down) base concrete of thickness of 15 cmwith standard specification over 15 cm stone soling including providing & laying guard stones complete, as per thedirection of theEngineer in Charge. |
| 205 | Supplying, fabricating, fitting and fixing tubular truss including putty, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shape washer etc complete in curve shaped Sikkim-style roofing as per the standard specification and design and as per the direction of Engineer - in- Chargeall complete. |
| 206 | Providing, fitting, fixing of 24 BWGGP sheet roofing by making corrugation of50mmx50mm x50mm on bothside with G.I. hooks, bolts and nut 8mm dia with bitumen, GI limpet washers filled with white bad including coat of approved steel primer and two coats of approved paint, on overlapping of sheet excluding carriage all complete. |
| 207 | Providing fitting fixing ridges or hips of 60cm overall width of plain 24 BWG Pre-painted HULASSheet fixed with G.I, J or L hooks bolts and nuts 8mm dia Limpets, Bitumen washers complete. |
| 208 | Providing, fitting and fixing 23cm deep 24BWG Pre-painted HULAS. sheet eaves board including (50mmx25mm) dressed sal timber beading and M.S. Rod brackets all complete. |
| 209 | Providing fitting and fixing 16mm thick valley of 90cm overall width in plain Pre-painted HULAS sheet class I fixed with GI J or L hooks, bolts and nuts 8mm dia GI limpet and bitumen washers complete. |
| 210 | Providing and French spirit polishing two or more coats including cleaning of the surface of dirt and dust papered smooth etc on new surface complete. |
| 211 | Cost of Haulage Excluding Loading and Unloading of stock material within 120 km all complete. |
| 212 | Loading and Unloading of Cement or Steel by Manual Means and Stacking. |
| 213 | Cost of Haulage Excluding Loading and Unloading of Sand within 30 km all complete. |
| 214 | Cost of Haulage Excluding Loading and Unloading of Stone chips within 30 km all complete. |
| 215 | Cost of Haulage Excluding Loading and Unloading of Stone within 30 km all complete. |
| 216 | Cost of Haulage Excluding Loading and Unloading of Stone within 30 km all complete. |
| 217 | Head load of stock materials for a distance beyond 30 m and within 100 m distance. |
| 218 | Head load of non-stock materials for a distance beyond 30 m and within 100 m distance. |
| 219 | Haulage for throwing away of excavated earth via Surfaced Road for the distance of 20 km excluding loading and unloading all complete. |
| 220 | CHAPEL |
| 221 | Excavation in soil in hilly area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 1000 metres. |
| 222 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 223 | Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete. (Mechanical Means) |
| 224 | Providing & Layingin position cement concrete of 1 : 3 : 6(1 cement, 3 coarse sand, 6 graded stone aggregate of 20 mm and down size) including compacting curing etc. all complete. |
| 225 | Filling inside plinth in building works with 23 cm layers, consolidated to 15cm including watering, ramming etc. all complete. |
| 226 | Filling with available excavated earth in trenches, plinth and side of foundation in building works with layers not exceeding 20cm in depth including consolidation of each layer by ramming, watering etc, all complete. |
| 227 | Providing and LayingRandom Rubble Stone Masonry wall with hammer dressed with bond stone, through stone of size 150mm x 150mm x 450mm manufactured in 1:4:8 (1cement, 4 clean coarse sand, 8 clean hard stone aggregate of size 40 mm and down) clean hard selected stone, including centering aligning and slopes/curves etc,completeas per the direction of Engineer in Charge. |
| 228 | Providing and Laying damp proof coarse 40 mm thick with cement concrete 1:2:4 ( 1 cement, 2 Clean coarse sand, 4 graded stone aggregate 12.5 mm & nominal size) as per the direction of Engineer in Charge. |
| 229 | Providing and Laying in position 1:1.5:3 Mix (1cement, 1.5 coarse sand 3 graded stone aggregate 20mm and down nominal gauge) of reinforced cement concrete excluding the cost of form work, finishing and reinforcements. |
| 230 | Providing, fixing and removing form work for casting R.C.C items as indicated below: (with locally available timber) |
| 231 | Foundation, footings, base of column etc. for mass concrete. |
| 232 | Square columns |
| 233 | Form work for beam, lintels, girders, brersumers & cantilevers. |
| 234 | Floor slab, roof slab, landing, balcony & access platform. |
| 235 | Supplying, bending and placing in position ofTor steelreinforcement in all R.C.C works i/c cost of binding wires all complete. |
| 236 | Providing and laying first class brick work in half brick thick in superstructure of standard size bricks with 1:4 cement mortar(1 cement and 4 coarse sand)including carriage of bricks upto work site and curing etc. all complete. |
| 237 | Providing and laying 12 mm thick cement plaster of 1:3 mix in single coat including finishing even & smooth and curing etc. all complete. |
| 238 | Providing & Laying white or colored glazed vitrified tiles of Orient / Somani or equivalent colourin flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 239 | Providing and Laying white or colored glazed tilesanti skid ( elegant, cashmere, Egyptian rustic, celebrity, lara etc or equivalent) of glossy series or celebrity, elegant or equivalentin flooring, treads of steps landing etc of size 300mm x 300mm laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 240 | Providing and Laying white or colored or ceramic glazed tiles of size 200mm x 300mm Special colour(black, burgundy, pink, midnight blue, alpine blueor equivalent) in skirting, risers of steps and Dados on 12mm thick cement plaster (1cement, 3coarsed sand) 1:3 bare and jointed with white cement slurry. |
| 241 | Providing and Laying marble stone slabs 20mm thick marble stone slabs flooring of size not less than 1.0 sqm of20mm thick laidover 20mm(average)1:4cm thick bare laid cement concrete and joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete (Raj nagar Plain Marble / Udaipur green marble or equivalent) |
| 242 | Providing, fitting and fixing of dressed local timber (tooni, katus equivalent) in all types of frames complete. |
| 243 | Providing, fitting and fixing water proof flush door shutters, solid block hard core construction with frame of 1st class hard timber with well matched 3mm teak ply decorative type on one faces of the shutters including hinges with screws complete. |
| 244 | P/F/F in position of fully glazed shutters in windows and doors of champ wood or equivalent including steel butt hinges, screws, 3mm glass panes of modi guard or equivalent etc complete. |
| 245 | Providing hold fast of (40x5)mm flat iron including fixing to frame with 10mm dia. Bolts nuts and timber plugs and embedding in CC 1:3:6 ( 1 cement, 3 coarse sand, 6 graded stone aggregate 2omm nominal size) block of size (30x10x15)cm. as per the direction of Engineer - in- Chargeall complete: |
| 246 | Providing and fixing Brass bright finished brass butt hinges with necessary screws etc. complete. |
| 247 | Providing and fixing tower bolts 300x10mm (Barrel type) with necessary screws etc complete. |
| 248 | Providing, fitting and fixing. sliding door bolts with nuts and screws etc. complete. |
| 249 | Providing and fixing 100mm mortise lock with 6 levers and pair of handles with necessary screws etc complete. |
| 250 | Providing and laying plaster of paris putty of 2mm thick over plastered surface to prepare the surface even and smooth all complete: |
| 251 | Providing and Providing and painting with plastic Emulsion paints two or more coats on New surface of required shade to give an even shade including brushing the surface clean of all dirt dust and smoothened by sand paper etc complete. |
| 252 | Providing and Providing and painting with acrylic exterior paints of quality and make equivalent to EXCEL, WEATHER SHIELD to give an even shade including brushing the surface clean of dirt, dust etc and sand papering and filling the scratches complete on New surface. |
| 253 | Providing and fixing M.S round or square bars at required spacing in timber frames of windows as per the direction of Engineer - in- Chargeall complete. |
| 254 | Providing / Fitting / Fixing 6mm thick ply false ceiling /paneling inwooden frames of timberpanisazor equivalent, excluding the cost of polishing and including cost of one coat priming onunexposed frame all complete. |
| 255 | Providing box drain of 30 cm (ht) x 45 cm (width) internal dimension with 1:2:4 Plum concrete (20mm & down) inside walls thickness of 23 cm (hill side) and 30 cm (road side)and 1:3:6 (20 mm & down) base concrete of thickness of 15 cmwith standard specification over 15 cm stone soling including providing & laying guard stones complete, as per thedirection of theEngineer in Charge. |
| 256 | Supplying, fabricating, fitting and fixing tubular truss including putty, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shape washer etc complete in curve shaped Sikkim-style roofing as per the standard specification and design and as per the direction of Engineer - in- Chargeall complete. |
| 257 | Providing, fitting, fixing of 24 BWGGP sheet roofing by making corrugation of50mmx50mm x50mm on bothside with G.I. hooks, bolts and nut 8mm dia with bitumen, GI limpet washers filled with white bad including coat of approved steel primer and two coats of approved paint, on overlapping of sheet excluding carriage all complete. |
| 258 | Providing fitting fixing ridges or hips of 60cm overall width of plain 24 BWG Pre-painted HULASSheet fixed with G.I, J or L hooks bolts and nuts 8mm dia Limpets, Bitumen washers complete. |
| 259 | Providing, fitting and fixing 23cm deep 24BWG Pre-painted HULAS. sheet eaves board including (50mmx25mm) dressed sal timber beading and M.S. Rod brackets all complete. |
| 260 | Providing fitting and fixing 16mm thick valley of 90cm overall width in plain Pre-painted HULAS sheet class I fixed with GI J or L hooks, bolts and nuts 8mm dia GI limpet and bitumen washers complete. |
| 261 | Providing and applying priming coat with ready mixed Red oxide, Zinc chromate primer on steel / galvanized Iron steel works including preparation of the surface complete. |
| 262 | Providing and painting with ready mixedpaint of approved quality and shade with two or more coats to give an even and smooth shade including clearing the surface complete on new surface. |
| 263 | Providing and French spirit polishing two or more coats including cleaning of the surface of dirt and dust papered smooth etc on new surface complete. |
| 264 | Cost of Haulage Excluding Loading and Unloading of stock material within 120 km all complete. |
| 265 | Loading and Unloading of Cement or Steel by Manual Means and Stacking. |
| 266 | Cost of Haulage Excluding Loading and Unloading of Sand within 30 km all complete. |
| 267 | Cost of Haulage Excluding Loading and Unloading of Stone chips within 30 km all complete. |
| 268 | Cost of Haulage Excluding Loading and Unloading of Stone within 30 km all complete. |
| 269 | Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kanker/Moorum. |
| 270 | Head load of stock materials for a distance beyond 30 m and within 100 m distance. |
| 271 | Head load of non-stock materials for a distance beyond 30 m and within 100 m distance. |
| 272 | Haulage for throwing away of excavated earth via Surfaced Road for the distance of 20 km excluding loading and unloading all complete. |
| 273 | Providing, fitting and fixing 2mm thick Polycarbonate Sheet Roofing all complete. |
| 274 | Provision for Service Staircase |
| 275 | PROTECTIVE WORK |
| 276 | Excavation in soil in hilly area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 1000 metres. |
| 277 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 278 | Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete. (Manual Means) |
| 279 | Providing & Layingin position cement concrete of 1 : 2 : 4(1 cement, 3 coarse sand, 6 graded stone aggregate of 20 mm and down size) including compacting curing etc. all complete. |
| 280 | Filling with available excavated earth in trenches, plinth and side of foundation in building works with layers not exceeding 20cm in depth including consolidation of each layer by ramming, watering etc, all complete. |
| 281 | Providing and Laying in position specified grade of reinforced cement concrete excluding the cost of form work, finishing and reinforcements. |
| 282 | Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber) |
| 283 | Foundation, footings, base of column etc for mass concrete. |
| 284 | Wall |
| 285 | Supplying, bending and placing in position ofTor steelreinforcement in all R.C.C works i/c cost of binding wires all complete. |
| 286 | Back filling behind abutment,wing wall and return wall complete as per drawing and Technical specification |
| 287 | Providing and Laying Plum concrete in 1:2:4 c.c. (1cement, 2coarse sand, 4clean hard graded stone chips of 20 mm down nominal gauge) with 70% cleanhard stone of sizes not exceeding 15cm including shuttering, compacting and curing complete, as per the direction ofEngineer in Charge. |
| 288 | Providing weep holes in Brick masonry/Plain/Reinforced concrete abutment,wing wall/return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical specifications |
| 289 | Cost of Haulage Excluding Loading and Unloading of stock material within 120 km all complete. |
| 290 | Loading and Unloading of Cement or Steel by Manual Means and Stacking. |
| 291 | Cost of Haulage Excluding Loading and Unloading of Sand within 30 km all complete. |
| 292 | Cost of Haulage Excluding Loading and Unloading of Stone chips within 30 km all complete. |
| 293 | Cost of Haulage Excluding Loading and Unloading of Stone within 30km all complete. |
| 294 | Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kanker/Moorum. |
| 295 | Head load of stock materials for a distance beyond 30 m and within 100 m distance. |
| 296 | Head load of non-stock materials for a distance beyond 30 m and within 100 m distance. |
| 297 | Haulage for throwing away of excavated earth via Surfaced Road for the distance of 20 km excluding loading and unloading all complete. |
| 298 | ROAD |
| 299 | Excavation for roadway in soil using manual means including loading in truck for carrying of cut earth to embankment site with all lifts and lead upto 1000 metres. |
| 300 | Water Bound Macadam (Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density.) |
| 301 | Prime coat (Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate shown in 500-1 using mechanical means.) |
| 302 | Tack coat (Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at required rate on the prepared bituminous/granular surface cleaned with mechanical broom.) |
| 303 | Water Bound Macadam (Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density.) |
| 304 | Tack coat (Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at required rate on the prepared bituminous/granular surface cleaned with mechanical broom.) |
| 305 | Dense Graded Bituminous Macadam (Providing and laying dense bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 to 4.5% by weight of total mix of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 507 complete in all respects.) |
| 306 | Seal Coat (Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A and B seal coats) |
| 307 | Painting Lines, Dashes, Arrows etc on Roads in Two Coats on New Work(Painting lines, dashes, arrows etc on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control) |
| 308 | Carriage of aggregate within 30 km distance.. |
| 309 | Carriage of sand within 30 km distance.. |
| 310 | Carriage of bitumen 30 km distance |
| 311 | Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kanker/Moorum. |
| 312 | Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kanker/Moorum. |
| 313 | Head load of non-stock materials for a distance beyond 30 m and within 100 m distance. |
| 314 | Haulage for throwing away of excavated earth via Surfaced Road for the distance of 20 km excluding loading and unloading all complete. |
| 315 | SURFACE PARKING |
| 316 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kind of soil. |
| 317 | Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete. (Mechanical Means) |
| 318 | Providing & Layingin position cement concrete of 1 : 3 : 6(1 cement, 3 coarse sand, 6 graded stone aggregate of 20 mm and down size) including compacting curing etc. all complete. |
| 319 | Providing and Laying Chequerstiles in on flooring over 12mm thick cement plaster (1cement, 3coarsed sand) 1:3 bare and jointed with white cement slurry. |
| 320 | Cost of Haulage Excluding Loading and Unloading of stock material within 120 km all complete. |
| 321 | Loading and Unloading of Cement or Steel by Manual Means and Stacking. |
| 322 | Cost of Haulage Excluding Loading and Unloading of Sand within 30 km all complete. |
| 323 | Cost of Haulage Excluding Loading and Unloading of Stone chips within 30 km all complete. |
| 324 | Cost of Haulage Excluding Loading and Unloading of Stone within 30 km all complete. |
| 325 | Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kanker/Moorum. |
| 326 | Head load of stock materials for a distance beyond 30 m and within 100 m distance. |
| 327 | Head load of non-stock materials for a distance beyond 30 m and within 100 m distance. |
| 328 | Haulage for throwing away of excavated earth via Surfaced Road for the distance of 20 km excluding loading and unloading all complete. |
| 329 | GATE |
| 330 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 331 | Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete. (Manual Means) |
| 332 | Providing & Layingin position cement concrete of 1 : 3 : 6(1 cement, 3 coarse sand, 6 graded stone aggregate of 20 mm and down size) including compacting curing etc. all complete. |
| 333 | Filling inside plinth in building works with23cm layers, consolidated to 15cm including watering, ramming etc, all complete. |
| 334 | Providing and Laying in position 1:1.5:3 Mix (1cement, 1.5 coarse sand 3 graded stone aggregate 20mm and down nominal gauge) of reinforced cement concrete excluding the cost of form work, finishing and reinforcements. |
| 335 | Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber) |
| 336 | Foundation, footings, base of column etc. for mass concrete. |
| 337 | Squarecolumns |
| 338 | Form work for beam, lintels, girders, brersumers & cantilevers. |
| 339 | Floor slab, roof slab, landing, balcony and access platform. |
| 340 | Supplying, bending and placing in position ofTor steelreinforcement in all R.C.C works i/c cost of binding wires all complete. |
| 341 | Providing and laying first class brick work in half brick thick in superstructure of standard size bricks with 1:4 cement mortar ( 1 cement and 4 coarse sand ) including carriage of bricks upto work site and curing etc. all complete. |
| 342 | Providing and Laying 15mm thick cement plaster of 1:3 mix in single coat including finishing even and smooth and curing complete. |
| 343 | Providing and Laying white or colored glazed vitrified tiles Pearl (white, marvel Atlanta, jet black etc or equivalent) in flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 344 | Providing, fitting and fixing of dressed sal timber (tooni, katus equivalent) in all types of frames complete. |
| 345 | Providing fitting and fixing water proof flush doors shutters, solid block hard core construction with frame of 1st class hard timber, with well matched 3mm commercial ply (both faces) including hinges with screws complete. |
| 346 | P/F/F in position of fully glazed shutters in windows and doors of champ wood or equivalent including steel butt hinges, screws, 3mm glass panes of modi guard or equivalent etc complete. |
| 347 | Providing hold fast of (40x5)mm flat iron including fixing to frame with 10mm dia. Bolts nuts and timber plugs and embedding in CC 1:3:6 ( 1 cement, 3 coarse sand, 6 graded stone aggregate 2omm nominal size) block of size (30x10x15)cm. as per the direction of Engineer - in- Chargeall complete: |
| 348 | Providing and fixing Brass bright finished brass butt hinges with necessary screws etc. complete. |
| 349 | Providing and fixing Brass bright finished brass butt hinges with necessary screws etc. complete. |
| 350 | Providing, fitting and fixing Tower bolts 250x10mm with necessary screw etc complete. |
| 351 | Providing, fitting and fixing. handles 125mm size with necessary screws etc complete. |
| 352 | Providing, fitting and fixing. sliding door bolts with nuts and screws etc. complete. |
| 353 | Providing and laying plaster of paris putty of 2mm thick over lastered surface to prepare the surface even and smooth all complete: |
| 354 | Providing and Providing and painting with plastic Emulsion paints two or more coats on New surface of required shade to give an even shade including brushing the surface clean of all dirt dust and smoothened by sand paper etc complete. |
| 355 | Providing and Providing and painting with acrylic exterior paints of quality and make equivalent to EXCEL, WEATHER SHIELD to give an even shade including brushing the surface clean of dirt, dust etc and sand papering and filling the scratches complete on New surface. |
| 356 | Providing and French spirit polishing two or more coats including cleaning of the surface of dirt and dust papered smooth etc on new surface complete. |
| 357 | Providing and fixing M.S round or square bars at required spacing in timber frames of windows as per the direction of Engineer - in- Chargeall complete. |
| 358 | SHS 50x30x3.2mm |
| 359 | Providing & applying priming coat with ready mixed Red oxide, Zinc chromate primer on steel/galvanized-Iron steel works i/c preparation of the surface complete. |
| 360 | Providing and painting with ready mixedpaint of approved quality and shade with two or more coats to give an even and smooth shade including clearing the surface complete on new surface. |
| 361 | Cost of Haulage Excluding Loading and Unloading of stock material within 120 km all complete. |
| 362 | Loading and Unloading of Cement or Steel by Manual Means and Stacking. |
| 363 | Cost of Haulage Excluding Loading and Unloading of Sand within 30 km all complete. |
| 364 | Cost of Haulage Excluding Loading and Unloading of Stone chips within 30 km all complete. |
| 365 | Cost of Haulage Excluding Loading and Unloading of Stone within 30 km all complete. |
| 366 | Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kanker/Moorum. |
| 367 | WATER SUPPLY & SANITATION FITTING |
| 368 | Excavation work by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50m. |
| 369 | Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete. (Manual Means) |
| 370 | Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete.1:1.5:3(1cement, 1.5 coarse sand,3 graded stone aggregate of 20mm& down size) |
| 371 | Providing, Fitting and fixing GI pipe of medium class, (excluding trenching, refilling, compactingandthe cost of fittings) all complete.50 mm dia G I pipe |
| 372 | Providing/fitting and fixing of G.I pipe etc all complete. |
| 373 | Haulage for stock material via Surfaced Road for the distance of 120 km excluding loading and unloading all complete. |
| 374 | Loading and Unloading of Cement or Steel by Manual Means and Stacking. |
| 375 | Haulage for Sand, River via Surfaced Road for the distance of 30 km excluding loading and unloading all complete. |
| 376 | Haulage for Stone chips, River via Surfaced Road for the distance of 30 km excluding loading and unloading all complete. |
| 377 | Haulage for Stone , River via Surfaced Road for the distance of 30 km excluding loading and unloading all complete. |
| 378 | Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kanker/Moorum. |
| 379 | Head load of stock materials for a distance beyond 30m and within 100m distance |
| 380 | Head load of non stock materials for a distance beyond 30m and within 100m distance |
| 381 | PROVIDING 15MM DIA G. I WATER SUPPLY PIPELINE FROM SYARI TANK TO TAMANG DHIM, GANGTOK, EAST SIKKIM. |
| 382 | Excavation work by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50m. |
| 383 | Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete. (Manual Means) |
| 384 | Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete.1:1.5:3(1cement, 1.5 coarse sand,3 graded stone aggregate of 20mm& down size) |
| 385 | Providing, Fitting and fixing GI pipe of medium class, (excluding trenching, refilling, compactingandthe cost of fittings) all complete.15 mm dia G I pipe |
| 386 | Providing/fitting and fixing of G.I pipe etc all complete. |
| 387 | Haulage for stock material via Surfaced Road for the distance of120 km excluding loading and unloading all complete. |
| 388 | Loading and Unloading of Cement or Steel by Manual Means and Stacking. |
| 389 | Haulage for Sand, River via Surfaced Road for the distance of 30 km excluding loading and unloading all complete. |
| 390 | Haulage for Stone chips, River via Surfaced Road for the distance of 30 km excluding loading and unloading all complete. |
| 391 | Haulage for Stone , River via Surfaced Road for the distance of 30 km excluding loading and unloading all complete. |
| 392 | Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kanker/Moorum. |
| 393 | Head load of non stock materials for a distance beyond 30m and within 100m distance |
| 394 | Head load of non stock materials for a distance beyond 30m and within 100m distance |
| 395 | INTERNAL WATER SUPPLY & SANITATION FITTING |
| 396 | ProvidingandfixingChlorinatedPolyvinylChloride(CPVC)pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall |
| 397 | 15 mm nominal outer dia Pipes |
| 398 | 20 mm nominal outer dia Pipes |
| 399 | 25 mm nominal outer dia Pipes |
| 400 | Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO / EQUIVALENT) |
| 401 | PILLAR COCK15 MM DIA |
| 402 | ANGULAR STOP COCK15 MM DIA |
| 403 | CONNECTING PIPE |
| 404 | BASIN MIXTURE |
| 405 | BIB COCK LONG BODY 15 MM DIA |
| 406 | STOP COCK15 MM DIA (CONCEALED WORKS) |
| 407 | SHOWER ROSE WITH ARM |
| 408 | Providing and fitting chromium plated toilet paper holder including the making holes and fixed to timber cleats with CP screws washer etc. all complete:. |
| 409 | Providing, fitting and fixingBeveled gauge mirror of superior glass with 6mm A.C. sheets ground and fixed to timber cleats with CP screws, washer etc complete. |
| 410 | Providing, fitting and fixing. of chromium plated soap dish with necessary screw etc all complete. |
| 411 | Providing, fitting and fixing towel ring of chromium plated brass complete with CP brass screw and timber cleats. |
| 412 | Providing, fitting and fixing towel rail of chromium plated brass complete with brackets fixed to the timber cleats, CP brass screws complete. |
| 413 | Providing, fitting and fixing soil, waste and vent pipes including testing etc complete. |
| 414 | 100 mm dia. PRINCE / SUPREME or equivalent soil pipe |
| 415 | (75 mm dia. PRINCE / SUPREME or equivalent soil pipe) |
| 416 | Providing, fitting and fixing. bends of various types plain or a band with access door, insertion rubber washer 3mm thick bolts and nuts complete SCI or centrifugally cost spun sands pipes. |
| 417 | (100 mm dia. PRINCE / SUPREME or equivalent soil pipe) |
| 418 | (75 mm dia. PRINCE / SUPREME or equivalent soil pipe) |
| 419 | Providing, fitting and fixing double equal junction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. |
| 420 | (100 mm dia. PRINCE / SUPREME or equivalent soil pipe) |
| 421 | (75 mm dia. PRINCE / SUPREME or equivalent soil pipe) |
| 422 | roviding, fitting and fixing white vitreous china pedestal (European type) water closet (W.C) pan with seat and lid, with C.P. brass hinges, 10ltr low level cistern with fittings and brackets 40mm flush bend, 20mm overflow pipe with specials, including Providing and painting and making good the wall and floors as required all complete: W.C. pan European One pice (Ivory) CAT NO 92008 |
| 423 | Providing, fitting and fixing. white vitreous china wash in surgeons type basin with CI bracket, painted, 15mm CP brass pillar taps, CP brass chain with rubber plug, 32mm CP brass waste pipe, lead or PVC connection 32mm dia \"CP brass cap and unions, complete including cutting and making good the walls wherever required. HINDWARE |
| 424 | Providing and Fitting Pedestal white colour for of Hind Vitreous wash basin complete. |
| 425 | Providing, fitting and fixing white vitreous china flat back or wall corner type lipped front urinal basin of size 440x315x325 mm with 5 ltrautomatic flushing cistern with C.I. brackets, GI flush pipe and spreaders with brass unions and G.I. clamps including cutting and making good the walls and floors as required all complete: Range of 1 Urinal basin. |
| 426 | P/F stain less steelkitchen sink with CI brackets, CP brass chain with rubber plug 40mm CP brass waste, CP brass tap etc complete i/c the fittings, cuttings and making good the wall wherever required. |
| 427 | Providing and placing on terrace high density polyethylene water storage tank with man hole lid and suitable locking arrangement including making holes for inlet, out let and ball cock including testing etc. all complete: (Sintex or equivalent) 2000 LITERS CAPACITY |
| 428 | Providing, Fitting and fixing ball valve ( Brass) of approved quality complete with high or low pressure with plastic floats: |
| 429 | SEPTIC TANK |
| 430 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 431 | Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete. (Manual Means) |
| 432 | Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber) |
| 433 | slab |
| 434 | Providing and Laying in position specified grade of reinforced cement concrete excluding the cost of form work, finishing and reinforcements. |
| 435 | Supplying bending and placing in position tor steel reinforcement in all RCC works including the cost of binding wires, all complete. |
| 436 | Cost of Haulage of Stock Materials from a distance of 120km |
| 437 | Loading and Unloading of Cement or Steel by Manual Means and Stacking. |
| 438 | Head load of stock materials for a distance beyond30 m and within 100m distance. |
| 439 | Cost of Haulage of non stock materials Sand from a distance of 30km |
| 440 | Cost of Haulage of non stock materialStone Chips from a distance of 30km |
| 441 | Cost of Haulage of non stock materials Stonefrom a distance of 30km |
| 442 | Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kanker/Moorum. |
| 443 | Head load of non-stock materials for a distance beyond 30 m and within 100 m distance |
| 444 | Provision for Furniture & furnishing all complete. (to be paid as per actual measurement) |
| 445 | Provision for landscaping & beautification all complete.(to be paid as per actual measurement) |
| 446 | Provision for landscaping & beautification all complete.(to be paid as per actual measurement) |
| 447 | Provision for Labour Cess |
| 448 | Provision for GST @ 18% |
AI Tender Summary
Tender Timeline
Sep 11, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedOct 13, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 14, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender