Tender For Lighting Work At Highway City Pocket-C And F. - S/E Of S.T. Pole 12.00 Mtr Long Designated 410-Sp-61 Including Base Plate In 1:3:6 C.C. Foundation Excavation 1/6 Of Pole Length Below G.L. And Plinth 30 Cm Above G.L. Around The Pole 20 Cm Thick , kanpur-Uttar Pradesh

Tender For Lighting Work At Highway City Pocket-C And F. - S/E of S.T. pole 12.00 mtr long designated 410-SP-61 including base plate in 1:3:6 c.c. foundation excavation 1/6 of pole length below G.L. and plinth 30 cm above G.L. around the pole 20 cm thick and back filling etc. complete in all respects as per direction of E/IcPSR(F.No.13/23-24) 3 S/F of LED Street Light Fitting with mandatory driver set having die cast aluminium body and lenses suitable size. Confirming to IP 66 protection having company LOGO engraved complete in all respect including labour as per direction of E/I. 4 (a)100-120watt SI.No. 1453/2018 CAT-AA Make: Hawells, Cromton, Bajaj, Philips.14000-15000 system lumens High Power LED with Lenses, >1001m/W, PF>0.95 THD<10% at full load, CRI>70,driver set (Not Circuitory) with 3 years warrantee. 5 (b)75-90 watt Confirming to IP 66 protection complete in all respect. CAT-AAA 8250-9900 system lumens High Power LED with lenses, >110lm/W, PF>0.95.THD<10% at full load, CRI>70, Potted driver set (Not Circuitory) Phase to Phase Protection at 440V & >300V auto cut and restart feature, with 5 year warrantee. S.I. No. 1423/2018. Make Havells, Compton, Philips, Bajaj. 6 S/L of following size Al conductor P.V.C. insulated armoured served sheathed cable 1100V grade at a depth of 750mm. Below ground level over a cushion of 75mm. Thick sand alround and protected with burnt bricks on side an top on surface the cable run shall be fixed on MS clamp of suitable size, approved make as direction of E/I. complete in all respects. 501/2018. 7 (a) 16 sq.mm 4 Core 8 (b) 10 sq.mm 4 Core 9 S/F of 63 Amp. 415V matal clad TPN rewireable type switch fuse unit on angle iron bracket/Pole complete in all respects as per direction of E/I. S.I.No. 316/2018 CAT-B. 10 Supply & Laying of 1x25+1x16 Sq.mm. of Aerial bundled cable 1100V grade XLPE insulated KESCo. Approved make confirming to latest relevant specification on steel/PCC supports including binding jumpering sagging and cost of material labour T&P etc. required for peoper completion of work as per direction of E/I. Make- Nikkon, RR Cable, Havells, Grandley, KEI & Polycab. 11 Supply & Fixing of Suspension type clamp made of Al alloy and shall be capable of holding AL alloy messenger wire of compacted dia. The eye hook shall be made of forged or mild steel the clamp shall be provided with black weather resistant plastic coating of at least 1mm thickness to prevent insulation of phase conductor from chafing due to rubbing against the clamp it shall provided sufficient flexibility to allow the movement of clamp at both, straight and angle location its hard ware shall have good finished and all ferrous fitting eye hook bolts nut and washer shall be galvanized with zinc and it also includes all the cost of material T&P etc. required for proper completion of work as per direction of E/I. 12 Supply & Fixing of Dead end type clamp made of Al alloy and U-bar shall be capable of holding AL alloy messenger wire of compacted dia. The eye hook shall be made of forged or mild steel the clamp shall be provided with black weather resistant plastic coating of at least 1mm thickness to prevent insulation of phase conductor from chafing due to rubbing against the clamp it shall provided sufficient flexibility to allow the movement of clamp at both, straight and angle location its hard ware shall have good finished and all ferrous fitting eye hook bolts nut and washer shall be galvanized with zinc and it also includes all the cost of material T&P etc. required for proper completion of work as per direction of E/I. 13 S/F of piercing connector made of AL alloy suitable of holding main conductor/tap conductor of compacted diameter the connector shall be covered by the black weather resistant insulation cover made of polyethylene at least 2m thick to avoid short circuit and corrosion including the cost of material I T&P etc for proper completion of work.(PSR) 14 S/F of M.S ring etc. complete in all respect Direction of E/I. File No-37/AA(E/M)/22-23 15 S/B of earth rod 20mm dia into 2.5mtr long including G.I. wire 7/16 SWG to connect earth rod to earth clamp on pole 3.00 mtr long steel conduit to carry earth wire along the pole.(PSR) 16 Painting of the electric pole with 2 coats of AL’ paint over red oxide primer complete in all respects SI.No.634/18.

INR 12000 /-

INR 6.10 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB