Tender For Repair And Renovation Work Of Toilets At Delhiwali Dharmshala,Nathdwara
Tender Value
19.40 Lakhs
Estimated cost
Bid Submission
01 Oct 2025
0 days left
EMD
38800
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
nathdwara → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair And Renovation Work Of Toilets At Delhiwali Dharmshala,Nathdwara
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meter lead : For thickness of tiles 25mm to 40mm. |
| 2 | Dismantling old plaster or skirting, raking out joints andcleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. |
| 3 | Dismantling stone slab/ terrazo chip flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead. |
| 4 | Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead: Of area 3 square meter and below. |
| 5 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 6 | Labour Charges for removing WVC pan: Indian/Orissa pan |
| 7 | Dismantling CI or asbestos rain water pipe with fittingand clamps including stacking within 50 meter lead:100mm dia pipe. |
| 8 | Carriage of following material including loading unloading and stacking if required complete in all respect.Earth, Sand, Lime, Moorum, manure or sludge, Building Rubbish, Stone Metal (Girt and ballast etc), Stone for Masonry work & Soling and Excavated rock etc. 5km |
| 9 | Repair to stone masonary in cement sand mortar 1:6 with old and new stone. |
| 10 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (i) first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @0.253 kg//sqm .This layer will be allowed to air cure for 4 hours. (ii) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm This layer will be allowed to air cure for 4 hours followed by water curing for 48 hours. The rates includes preparation of surfacetreatment & sealing of all joints ,corners, junction with polymer mixed slurry. |
| 11 | Random rubble dry stone Kharanja under floor. |
| 12 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). |
| 13 | Random Rubble stone masonry with hard stone in superstructure above plinth level and upto five level above 30cm. thick walls in : Cement Mortar 1:6 ( 1-Cement : 6-Sand). |
| 14 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in :Cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 15 | Half brick masonry in Superstructure , above plinth level upto floor V level using bricks of designation 75 Cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 16 | Grading roof for water proofing treatment with waterproffing compoundCement concrete 1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate 20 mm nominal size) |
| 17 | Finishing with neat cement (punning). |
| 18 | Plaster on new surface on walls in cement sand mortar 1:6including racking of joint etc. complete fine finish : 25mm thick |
| 19 | Plaster on new surface on walls in cement sand mortar 1:6including racking of joint etc. complete fine finish : 20 mm thick |
| 20 | 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) |
| 21 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : |
| 22 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade :Two or more coats on new work including prepration of base with primer putty lippy complete in allrespect. |
| 23 | Painting exterior surface ofWallwith 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty,etc complete in all respect.New Work |
| 24 | White washing with lime to give an even shade including allscaffolding: New work (three or more coats). |
| 25 | Painting with enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 26 | Providing and fixing steel gate grating and grills made of angles, tees, square bars orflats black pipe with holdfast and fittings complete as per deign and drawing including cutting welding and fabrication with priming coat of red oxide. |
| 27 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. |
| 28 | Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) For area of each slab from 2001 to 5000 Sq.Cm |
| 29 | Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1cement 3 coarse sand) and jointed with grey cement slurrymixed with pigment to match the shade of the slabs, including rubbing and polishing complete For area of each slab from 2001 to 5000 Sqcm |
| 30 | Providing and fixing M.S. sheet 1mm thick single leaf doorshutter in angle iron frame 35x35x5mm suitabilly diagonallybraced with 25x3mm flat iron above and below lock rail ofsize 50x5mm beading extra including all fittings, as perdirection of Engg. incharge but excluding cost of chowkhats:including two coats of anit-corrosive red oxide primer paint |
| 31 | Providing and fixing 1st quality MAT & GLOSSY finished ceramic tile confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4).Size 300mm x 450mm |
| 32 | Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed |
| 33 | P & F European type white glazed vitreous china 1st quality W.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floor |
| 34 | P & F water closet Seat Covers with brass hinges complete :Solid PVC (IS 2548 marked) grade-I White. for EWC. |
| 35 | P & F Indian type white glazed vitreous china Ist quality W.C.orissapan (I.S: 2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor. Size 580 x 440 mm |
| 36 | P & F C.P. lugs for toilet seat cover. |
| 37 | P/F Low level flushing cistern of 10 litres capacity (IS:2556 mark) of approved make with complete fittings C.I. brackets duly painted brass ball cock with ball (IS:1703 mark) complete incl. cutting and making good the wall PVC with PVC bend and superior internal fittings as per IS :7231 . |
| 38 | P & F WVC Wash basin (Ist quality IS:2556 Mark) ofapproved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVCnut 32 mm complete including cutting & making good the wall :Size 610 mm x 510 mm |
| 39 | P & F 1st quality WVC pedestal for wash basin. |
| 40 | P & F Bevelled edge Mirror/mirror with teak wood lipping round of special glass of approved make as per direction of Engineer-in-charge complete with 6mm thick commercial ply base fixed to wooden screws & washers. |
| 41 | P/F toilet shelf of approved quality/make glass shelf with edges rounded off Anodized Aluminum angle frame and C.P. brass brackets and guard rail size 600x120mm. |
| 42 | P/F C.P. brass towel ring revolving type. |
| 43 | P & F Towel Rail or Ring of approved quality/make:C.P. brass Towel Rail elbow type with concealed screws size600 mm (Heavy duty). |
| 44 | P & F grating of approved quality/make C.P. brass with frame (heavy) and superior quality size 125mm dia. |
| 45 | P/F Soap dish or tray of approved quality/make C.P. brass heavy and superior quality.Soap Dish 380mm. |
| 46 | P & F Liquid Soap Container with brackets complete ofapproved make: C.P. brass |
| 47 | P/F Jet spray for water closet with C.P. copper tube flange of approved make. |
| 48 | Providing and fixing GI pipes (External work) with GI fittings excluding union (IS : 1239 mark) incl. trenching and refilling earth etc. 15mm dia nominal bore ‘B’Class. |
| 49 | --do-- 25mm dia –do— |
| 50 | --do-- 50mm dia –do-- |
| 51 | P/F Pillar cocks (IS:8934 mark) of superior quality and approved make C.P. Pillar cock, swan-neck with casted spout, 15mm nominal bore. |
| 52 | P/F bib cock (IS:8931 mark) superior quality of approved make C.P. Brass bib cock,15mm nominal bore. |
| 53 | Providing and fixing Superior quality CP Brass fittings ofapproved make as per direction of Engineer-in-charge Two way Bib Cock 15 mm nominal size |
| 54 | Providing & fixing C.P.flange for 15mm dia taps. |
| 55 | P/F 15mm dia connection pipe of approved quality/make PVC pipe with C.P. brass nuts upto length 450mm. |
| 56 | --do-- 600mm. |
| 57 | P/F Inlet connection (Angle valves) superior quality, of approved make, for Wash basin, Gyser etc with 60 cm long thread and nut |
| 58 | P/F flush cock/flush valve (IS: 9758 mark) for WC of approved quality make C.P. brass half turn Concealed 25mm nominal bore. |
| 59 | P/F full way valve (IS:778 mark) or wheel valve of approved make Gun metal 15mm nominal bore. |
| 60 | --do—25mm nominal bore. |
| 61 | 50mm nominal bore. |
| 62 | Providing & fixing PVC storage tank (IS: 12701 marked indicating the BIS license No. ) of approved make with cover, 25mm dia. 1 mtr. long G.I. over flow pipe and 25 cm. long washout pipe with plug and socket including making connections etc. complete of approved design,5000 litres capacity. |
| 63 | P/F rigid PVC pipe (IS:4985 mark) class II (4 Kg./Cm2) approved quality/make incl. jointing the pipe with solvent cement rubber ring and lubricant 75 mm dia. |
| 64 | P/F rigid PVC pipe (IS:4985 mark) class II (4 Kg./Cm2) approved quality/make incl. jointing the pipe with solvent cement rubber ring and lubricant 75 mm dia.110mm dia. |
| 65 | P/F rigid PVC pipe (IS:4985 mark) class II (4 Kg./Cm2) approved quality/make incl. jointing the pipe with solvent cement rubber ring and lubricant 160mm dia. |
| 66 | P/F rigid PVC pipe fittings (IS:4985 mark) of approved quality/make incl. jointing the pipe with solvent cement rubber ring and lubricant Reducer 110x75 mm110mm |
| 67 | ---do--- Plain Tee 75mm |
| 68 | ---do--- Plain Tee 110mm |
| 69 | (---do---) Plain Tee 160mm |
| 70 | ---do--- Door Tee 75mm |
| 71 | ---do--- Door Tee 110mm |
| 72 | (---do---) Door Tee 160mm |
| 73 | ---do--- Bend 87.5, 75mm dia. |
| 74 | ---do--- Bend 87.5, 110mm dia. |
| 75 | (---do---) Bend 87.5, 160mm dia. |
| 76 | --do—Door Bend top side 75mm |
| 77 | ---do--- Door Bend (Top side) 110mm dia. |
| 78 | (---do--- )Door Bend (Top side) 160mm dia. |
| 79 | (---do---) coupler (Socket) 75mm |
| 80 | (---do---) coupler (Socket) 110mm |
| 81 | (---do---) coupler (Socket) 160mm |
| 82 | --do— Vent Cowel 110mm dia. |
| 83 | --do-- Multi floor trap 110mm dia. |
| 84 | --do-- Gully trap 110mm dia. |
| 85 | (--do—) Bend 4575mm |
| 86 | (--do—) Bend 45110mm |
| 87 | (--do—) Bend 45160mm |
| 88 | (--do—) Pipe Clip 75mm |
| 89 | (--do—) Pipe Clip 110mm |
| 90 | (--do—) Pipe Clip 160mm |
| 91 | Supplying and fixing G.I. Union ISI marked in G.I. Pipe line as required complete in all respect of size 15mm dia nominal bore. |
| 92 | ----do---- 25mm dia nominal bore. |
| 93 | ----do---- 50mm dia nominal bore. |
| 94 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) 15 mm nominal size |
| 95 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) 20mmnominal size |
| 96 | (--do--)25mmnominal size |
| 97 | (--do--)32mmnominal size |
| 98 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge. (External work).15mmnominal size |
| 99 | (--do--)20mmnominal size |
| 100 | (--do--)25mmnominal size |
| 101 | (--do--)32mmnominal size |
| 102 | (--do--)40mmnominal size |
| 103 | (--do--)50mmnominal size |
| 104 | Construction of Manhole in all types of soil inner size 1.5x1.2 M with 450mm thick masonry in C.M. 1:6, 10 cm thick cement concrete 1:5:10 in foundation 20mm thick inside plaster in C.M. 1:6 finished with floating neat cement 50mm thick M-15 grade C.C. flooring making channels 80mm thickstone slab covering with 40mm thick stone M-15 grade C.C. flooring, Ferro cement cover with frame of 450mm dia earthwork etc. complete as per design including disposal of surplus earth within50 mtr. Lead as per desing depth upto1.5 M. |
| 105 | Construction of Chamber in all types of soil300mm thick masonry in C.M. 1:6 m 10 cm thick C.C. 1:5:10 in foundation, 20mm thick inside plaster in C.M. 1:6 finished with floating neat cement 50mm thick M-15 grade C.C. flooring earth work etc. complete as per designincl. disposal of surplus earth withina lead of 50 mtr. Inside size 600 x 450mm depth upto 0.5 M to 1.0 M Cement cover withframe. |
| 106 | ………..do………. size 450 x 450mm depth upto 0.5 M Cement cover with frame |
| 107 | Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M- 15 grade C.C floor & RCC slab covering with M15 grade c.c. floor, 50 mm thick stone slab partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos stone foot rests of approved design ,two No. 450 mm dia each Ferro cement cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:-Size 400 x140x150 cm.(for 50 users) with 115 mm thick RCC (M-20) slab with Tor steel reinforcement 10mm ϕ @15 cm c/c bothways including shuttering complete in all respect. |
| 108 | Earth work in surface excavation not exceeding 30cm. indepth but exceeding 1.5 meter in width as well as10 Sqm onplan including disposal of excavated earth up to 50 Mtr. andlift up to 1.5 Mtr. disposed soil to be levelled and neatlydressed : All kinds of soil |
| 109 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) ofapproved make in surface / recessed ISI marked medium duty PVC conduit & it\"s accessories, round tiles,Hot Dipped Galvanized Modular Box with earth terminal, 6 A Modular switch,Modular plate with grid plate,screws,making connections, testing etc. as required. Short point (up to 3 mtr.) |
| 110 | Medium point (up to 6 mtr.) |
| 111 | Long point(up to 10 mtr..) |
| 112 | Supplying and fixing of power plug point Modular accessories on hot dipped galvanized modular on surface or in recessed with suitable size of grid plate with cover plate including cost ofmodular 16 amp. Switch and socket outlet, making connection , testing , etc. as required. |
| 113 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existingsurface or recessed conduit/casing capping including making connections etc. as required.Gr.-11 x 1.5 sq.mm |
| 114 | 2 x 2.5 sq. mm. + 1x1.5sqmm |
| 115 | 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. |
| 116 | 2 x 6.0 sq. mm. + 1 x 2.5 sq. mm. |
| 117 | P&F 240/415 V MCB of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required.GROUP 1 Single pole MCB6 A to 32 A rating |
| 118 | Four pole MCB40 A 63 A rating |
| 119 | S&F following sizes (dia.) of ISI marked virgin material MMS ( IS:9537 P - III ) PVC conduit along withISI marked (IS:3419-1988) accessories as requiredinrecessincludingcutting the wall, covering conduit and making good the same as required. For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR 20 mm |
| 120 | 25 mm |
| 121 | Providing & Fixing ofBEEStar rated copper wounded double ball bearing capacitor start, aluminium body & Metallicblade ceilingfanConforming to all the performance requirements laid down in IS 374:2019 including all amendments, as applicable ; & Carry BIS licensing (i.e. ISI marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR .1200 mm Sweep BEE 3 Star rated (service value >=5.0 to< 5.5 ) |
| 122 | P & F following modular accessories made out of unbreakable and fire retardant poly carbonate with silver contacts including making connections testing etc. as required 5 step fan regulator 2 Module |
| 123 | Providing & Fixing of IP20 SMD Mid Power LED batten type integrated light fixture made from Powder coated Extruded aluminiumhousing with in built driver, System lumen efficacy ≥ 110 lm/Watt output, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, CRI >80 , life time of minimum50000 Burning Hours with , 70% of intial Lumen maintaned till life ends, CCT 3000°K / 4000°K/ 5700°K /6000°K/6500°K (As per ANSI Bin) , Maximum power consumption should not more than the specified rating and Fixture shall be ofBIS standard andtrade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR .570mm (+/-10%) batten with min. lumen output 1000 lm |
| 124 | Supply & Laying following size earth wire in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles,making connection with GI/Cu purity purity >95%thimble etc. as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . 8 SWG tinned copper Wire |
| 125 | Plate Earthingas per IS:3043 with Hot dipped G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying3 to 4 mtr. below the ground level with 20mm dia. G.I. \"B\" class watering Pipe ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height250 to 300 mm. and embodying the pipecomplete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or lessas required & must record by engineer in charge during site visit and ensure to enter in measurment book.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 126 | Providing & Fixing of Recessed/surface mounting heavy duty horizontal type Double Door ( Metal / Glazed )Distribution board with Metal end box made out from Galvanized steel / CRCA sheet not less then 1.2 mm thick conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3, powder painted complete with reversible door (for double door DB only )100 amp. insulated copper bus bar/shorting link , copper neutral link, copper earth link , color coded interconnecting wire set of suitable rating and din bar,masking sheet, making internal DB terminations with copper lugs, Ferrules, detachable gland plate, including making connections, testing etc. as required. OEM shall have submitNABL / CPRI / ERDA accrediated lab type test reports& All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR4 Way (4+2) |
| 127 | 16 Way (16+2) |
| 128 | Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed ArrmouredAluminiumcable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV withH4- Grade electrolyticaluminium conductor confirming to IS 8130 of purity >99.6 %, round / flat strip armouring of cables, Inner / outer sheath confirming to IS:5831in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) includingtesting etc. as required of following size. OEM must have it\"s own in house NABL accrediated Laboratory for testing procedure as per IS:10810.For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR 25sq mm 3.5 core |
| 129 | Providing & Fixing of IK08, IP 66 protected LED Street Light Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminummaterial with heat dissipation fins on housing with UV stabilized PC (UV stablization report submitted for UV cover ) /Toughened Glass coverand secondary lens on each LED & should be SMD type of 3 to 5 watt each . The System efficacy >=125 lm/ wt and potted driver& has a unique BIS R number withInput Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety , Power Factor >0.95 driverEfficiency >85%,THD(I) <10%Humidity 10% to 90% RH Working Temp -5C to 45C .driver current <750mA. The luminaireshall be BIS certified and Trade mark certified. Life ExpectancyEqual or more than 50000 burning hrs with Minimum 70% lumen maintened , CRI >70 and CCT 5700K +355K. Surge protection shall be min ≥ 4 KV internal and min 10 KV external inside driver compartment. driver should be Phase to phase protection of 440 V for 4 Hrs.Manufactures Word Mark/Name Engraved/Embossing on die cast housing to allow traceability/authenticity. Fixture shall be AS PER IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities forLED fixtures.(LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR .LED Street Light fixture with Minimum lumen output 3700 lm |
| 130 | Providing & Fixing of Street light bracket made out from following size of \" B \" class , Medium class G.I. Pipe confirming to IS : 1239 P - 1 ( 2004 ) with heavy duty pole clamp, Saddles suitable fastners etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR .32 mm Dia. |
| 131 | Providing & Fixing of Heavy duty capacitor start, copper woundDouble ball bearing900/1400 RPM single phaseExhaustfan conforming to IS:2312 ISI marked in existing opening including making connections testing etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . 450 mm sweep(900/1400 RPM) |
AI Tender Summary
Tender Timeline
Sep 11, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedOct 01, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 04, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender