Educational and Research Institute Government Departments Closing in 0 days TDR #51158304

Tender For Supply And Installation Of Highmask Light In Vishvavidyalaya Parisar

Issued by Government Departments · chitrakoot, Uttar Pradesh
Tender Value
22.95 Lakhs
Estimated cost
Bid Submission
22 Sep 2025
0 days left
EMD
45914
Bank guarantee accepted
Document Fee
4600
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
chitrakoot → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Supply And Installation Of Highmask Light In Vishvavidyalaya Parisar

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 16-Sep-2025 DATE CHAGE Date 22-Sep-2025

BOQ

Name of Work: SUPPLY AND INSTALATION WORK OF HIGHMASK LIGHT IN VISHVAVIDYALAYA PARISAR
Sl. No. Item Description
1SUPPLY AND INSTALATION OF 170 TO 200 WATT 16 Mtr HIGHMAST LIGHT
2Supply & fixing of 16 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 360 mmbase plate 32 mm thick suitable for wind velocity as per IS 875 part 3 &having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect.SL No. 652 (Supplimentary)
3Supply and fixing offactory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 170 to 200 Watt.Confirming to IP 66 protection complete in all respect.CAT-AAASL No. 1455
4Same as in item 121 (B) but in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrandcopper conductor cableas earthwire drawn inside the conduit. Sl No. 121 ©
5Supply and fixing of brass nickle plated compression gland for PVC Insulated and armoured served u/c cable including rubering etc. complete in all respect 70 sq. mm 3-1/2 coreas per Sl. No. 503 (m)
6Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect 70 sqmm as per direction of the Engineer-Incharge. as per Sl. No. 504 (h)
7Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect 25sqmm 3.5 as per direction of the Engineer-Incharge. as per Sl. No. 504 ©
8Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB\"s (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects.As per Sl.No. 811 (b) (ii)
9Supply and burying earth for lighting conductor of900mm x 900mm x 3mm copper plate vertically with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe for watering funnel, 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respect. As per Sl.No. 709
10Supply & Installation of 06x200Watt LED Light on 12.5 Meter Long Octagonal Pole at Block Bhadar
11Supply & fixing of 12.5 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 360 mmbase plate 32 mm thick suitable for wind velocity as per IS 875 part 3 &having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 0.75 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect.SL No. 21.3
12Supply and fixing offactory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 170 to 200 Watt.Confirming to IP 66 protection complete in all respect.CAT-AAASL No. 1455
13Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Gavanized), Length up to 3000mm, outer Dia 50 mm iner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and iner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron led with crystalline conductive mixture (CCM) havng anti corTosive & conductive property with 50 kgs activated sol (BFC) capable ofreducing the sol resistivity with good mixture| No of retaining capacity and one earthing lead of 25mm x 3mm GIL strip, upto switch board (from apron to switch board the cost of GI. stip wl be extra) along with 30cm square C.I fframe with hinged cover & masonry housing (Sch No.725 B)
14Supply and fixing of brass nickde plated compression A gand for PVC insulated & arnoured served sheathed, under ground cable inchuding rubber ring etc. complete in all respect. complete in all respect. Sch No S03 G
15Supply & Laying of Aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on sides and on top...complete in all respect. 25 sq. mm Sch No. 20a-1.9
16Supply and fixing folowing capacity of automatic street light cubicle control panel painted d with anti Corrosive alkali and acid proof paint consisting of time switch TSO100 series with contactors, HRC fuses, isolating switch metering instrument & instrunent box with CTs etc. in case of TPN complete in all respect. (40 A TPN, Sch |No 807 )
17Supply and fixing of single unit LED aviation obstruction Light complete with transformer and LED spiral etc complete in al respect.(Sch No 409)CAT AAA
18SF of Reflective Reto Gate sign board with angle iron |supporting nut bolt etc. Complatet in all respect MR
19SF of 20nm dia Flexible pipe.... Complete MR
20Supply and wiring of submain wih four number 1.5 |sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable .complete in all respect (Sch No l303 c)
21Supply and fixing of plain or pin type copper tin plated cable socket ( 1ug ) to the cable leads, insulating with tape and making conection etc. complete in all respect Sch No 504 B
22S/F of 5KVA 3 Phase steblizer with enclose box MR

AI Tender Summary

OUR REF NO 51158304
AUTHORITY Government Departments
TENDER VALUE 22.95 Lakhs
LAST DATE 22-09-2025
Authority
Authority Name Jagadguru Rambhadracharya Divyanga State University
Work Description Tender For Supply And Installation Of Highmask Light In Vishvavidyalaya Parisar
Basic Detail
Tender No REG OFF/JRDSU/TOO8/2025 DT 11.09.2025
Bidding Type Tender
Location
City chitrakoot
State Uttar Pradesh
Key Dates
Publish Date 16 Sep 2025
Submission Date 22 Sep 2025
Open Date 22 Sep 2025
Finance
Tender Value 22.95 Lakhs
Tender Fee 4600
EMD 45914
Exemption Available
Document List
b42aa989-d412-44ab-9904-cab607056fdc.html
BOQ_1958992.xls
TENDERNOTICE.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 16, 2025
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 22, 2025
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Completed
Sep 22, 2025
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Sep 22, 2025

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

b42aa989-d412-44ab-9904-cab607056fdc.html

xls

BOQ_1958992.xls

pdf

TENDERNOTICE.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders