|
| 1 | Demolition of cement concrete un reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed. |
| 2 | M&L for PCC 1:4:8 typetype D-2 as insub base of floor,paving etc and similar works complete all as specified and directed. |
| 3 | M&L for PCC 1:2:4, type B-1 using 20 mm graded stone aggregate as in coping, benching, bed block, lintel band, plinth courses etc and similar work including Broken glass coping on top of walls necessary form work complete all as specified and directed. |
| 4 | M&L forChequered cement concrete tiles 30cm x 30cm x25mm thick set, jointed and pointed in neat cement slurry in floors with white cement and pigments complete all as specified and directed. |
| 5 | Dismantling of interlocking tiles over laid dry of any description or thickness in floors, aprons etc. complete all as specified and directed. |
| 6 | M & L for60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. |
| 7 | M&L for Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 complete all as specified and directed. |
| 8 | M&L for Mild SteelTMT bar 6 to 8 mm diacut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 9 | S&Fin repair 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe of low level of 32mm dia fixed to wall complete all as specified and directed. |
| 10 | S&F in repair PVC connections 15 mm size with brass nuts both side of length 450 mm complete all as specified and directed . |
| 11 | S&F in repair 15mm angle cock with flange cast copper alloy, chorminium plated, fancy type, screwed both ends for iron pipe or for union complete all as specified and directed. |
| 12 | S&F in repair 15mm bib taps, fancy type chromium platedwith crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 13 | Demolition/Dismantling and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortor for 150 mm internal dia of pipe including excavation work to complete all as specified and directed. |
| 14 | M&L salt Glazed stone ware drain pipe 150 mm bore grade \"A\" laid in trenches and jointed and testing complete all as specified & directed. |
| 15 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 16 | M&L for Brick workwith sub class \"B\" bricks straightor curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 17 | Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 18 | M&L for rendering on fair faces of brick workor concrete surfaceof wall 15mm thick in CM 1:6 and to be finished even and smooth without using extra cement complete all as specified and directed. |
| 19 | M&L 15 mm thick rendering in CM 1:4 on external surfaces of walls & top surfaces of chajja/roof/ceiling mixed with liquid water proofing compound as per manufacturer\"s instn surface finished even and smooth without using extra cement complete all as specified and directed. |
| 20 | M&L for Preparing old/new plastered surface of wall and applying one coats of cement based paints over a coat of primercomplete all as specified and directed.. |
| 21 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed. |
| 22 | Excavating in post holes (or similar holes) in soft/loose soil each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed. |
| 23 | S&F Mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed. |
| 24 | S&F in repair chain link MS Galvanised fencing of 3mm dia of wire & aperture 75 x 75mm including line wires straining bolts etc. rails & binding wire including dismantling old chain link fencing complete all as specified and as directed. |
| 25 | M&L forprecast cement concrete louvres and jallies, 35mm thick (mea sured solid), including all mouldings including necessary work complete all as specified and directed. |
| 26 | S&F in repair Punched Tape concertina coil (including spike and handle) with 50 turns and dia 915mm having a core wire of high carbon spring steel of high tensile strength. The punched tape and core wire (2.6+0.035mm dia) are electro galvanised to provided protection against out door exposure. The punched tape is mechanically crimped over the core wire and then formed into a coil at various parts of the periphery of the coil steel clips total 129 nose per coil spaced to connect the individual turns of the coil to each other so that it opens up like an accordion The width of strip as 19mm and spacing of blades 24.00+0.5 mm C/C the weight of each coil will be 15.2+5% kgs without packing material and coil length 15mtr wen opened up with an effective height 915mm Each coil wound with bituminized hessain cloth for providing protective packing.Complete all as specified and directed. |
| 27 | M&L framed work as in doors or gates of angle or other section with gusset plates, braces etc complete drilled for fixing of steel sheeting or other covering. Doors to be prepared for hangidng or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete conforming to Fe 410-w(Gde-E-250 quality) complete all as specified and directed. |
| 28 | M&L for preparation of newsurfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 29 | S & F in repairs Galvanized, 2 strand, steel barbed wire 2.24 mm dia., barbed with 2 mm dia., barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel pins etc complete all as specified and directed. |
| 30 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons, cills etc. laid bedded & pointed in any mortar complete all as specified and as directed. |
| 31 | M & L Granite (of any type) tiles / slab 16/18mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over and including screed bed 20mm thick in CM 1:6 complete all as specified and directed. |
| 32 | Dismantling for Asbestos cement (corrugated, semicorrugated, etc.) / Fibre glass reinforced translucent corrugated sheets and pre-painted galvinised sheet in roof or any other description complete all as specified and directed. |
| 33 | M & L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-charge. Note : Make approved by GE complete all as specified and directed. |
| 34 | M & L for Pre- painted galvalume aluminum zinc coating GI based corrugated Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-charge. Note : Make approved by GE |
| 35 | Taking down Chowkats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 36 | Ditto all as per srl item No. 35 above but exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and directed. |
| 37 | S & F Factory made single extruded WPC (Wood Polymer Composite soliddoor/window/Ceosetory windows & other Frames/Chowkhat of size 100 x 50 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant Make :Rajshree or equivelent complete all as specified and directed. |
| 38 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Make :- Rajshree or equivelent complete all as specified and directed. |
| 39 | S&F Factory made solid panel PVC door shutter 30mm (style) consisting of framemade out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded wood grain printed PVC sheet used 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90o) used instead of exposed portion of PVC sheet beading panelling of wood grain printed PVC sheets to be fitted in the MS frame welded sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supling & fixing in the frame at the site as per specification and drawing shown in SSR Pt-I all as directed. Make :- Rajshree or equivelent complete all as specified and directed. |
| 40 | S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube and edges will be painted to match with printed sheet fixing in opending as per specification and drawing etc complete all as specified and directed. |
| 41 | S&FMS butt hinges 100 mm long medium weight, cold rolled complete all as specified and directed. |
| 42 | S&F 150 mm long extruded alu alloy handles, fabricated type, anodised complete all as specified and directed. |
| 43 | S&F 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 44 | S&F 150mm long Aluminium,anodized barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 45 | S&F 200mm longAluminium,anodized barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 46 | Hacking out old broken glass (any thickness, size, quality or description) from any frame surrounds, glazed with puttyor fixed with beads complete all as specified and directed. |
| 47 | S&F 4 mm thick sheet glass ordinary quality and glazing complete in square n exc 0.50sqm each complete all as specified and directed. |
| 48 | S&F in repair 10 mm thick toughned glass as in hinges door partition automatic door and similar works including cutting to shape drilling hole requred complete all as specified. |
| 49 | S&F in repair 10 mm thick bulit proof glass as in window, door and similar works including cutting to shape drilling hole requred complete all as specified and directed. |
| 50 | Dismantling wall and celling boards (fibers pulp insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and directed. |
| 51 | S&F Anodised alunimun size 605 x 605 mm snap grid frame work for false ceiling complete all as specified and directed. |
| 52 | S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 53 | S&F 4mm thick non asbestos fibre cement building board and fixed tosuitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per pecification and drawing complete all as specified and directed. |
| 54 | M&L Granolithic concrete 1:1:2 floor topping 30mm thick, laid over PCC subfloors etc and finished to an even and fair surface complete all as specified and directed. |
| 55 | M&L Wearproof topping as specified (incorporating an approved metallic floor hardner as per maufacturer instruction), laid on concrete floors and pavings, and finished even and smooth (except metallic hardner) thickness of topping 15 mm complete all as specified and directed.Note:- Metallic Hardener shall be measured and paid saperatly |
| 56 | Supply only metalic floor hardener complete all as specified and directed. |
| 57 | S&F Plastic dividing strips, 1.5mm thick and inserted in position to conform to design width of strip 38 mm complete all as specified and directed. |
| 58 | Schedule of credit of Amount Rs.1,05,165.00 to be deducted during AOC. |
