|
| 1 | Earth work excavation for foundation and depositing on bank for refilling within an initial lead of 10.00 m and an initial lift of 2.00 in hard stiff clay. Stiff black cotton soil, hard red earth, sales, murrams, gravel, stoney earth, earth mixed with small sized boulders and hard gravelly soil and except hard rock requiring blasting including shoring, strutting, bailing water wherever necessary and all other incidental charges etc., complete as directed by departmental officers as per S.S.20B |
| 2 | Plain Cement Concrete 1:4:8 mix, (one part of cement, four part of sand andeight part of aggregate) mix using 40mm ISS HBG metal from approved Quarry including cost and conveyance of all materials and all labour charges for mixing, laying, compacting and curing the concrete and other incidental charges etc., complete.as per standard specification 28 V,VI S25 |
| 3 | Supply and fabrication of steel using TMT rodsfor all Reinforced cement concreteworks including cost and conveyance of all materials and all labour charges for cutting, bending and placing the rod in position and tying up the rods with binding wire and other incidental charges etc., complete.as per standard specification SS 86 & 86A V,VI, VII (S6) 7,3 |
| 4 | Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - |
| 5 | Below ground level |
| 6 | Above ground level |
| 7 | Supply and erection of steel centering, shuttering for soffits and sides including necessary support strutting for all RCC works using MS sheets of suitable size of BG 10 stiffened with MS angle of size 25x25x3mm for boarding laid over Silver Oak joists of size 10cmx6.5cm space at 10cm c/cand supported by Casurino Prop 10cm-13cm spaced at 75cm c/c etc., complete and as directed by Departmental Officers. |
| 8 | Below ground level |
| 9 | Above ground level |
| 10 | For Coloumn |
| 11 | Brick Work in Cement Mortor 1:5 Mix (one cement, five sand) using new best II Class Bricks of size9 ” x 4 3/8 “x 2 3/4 ”from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications. |
| 12 | Below ground level |
| 13 | Above ground level |
| 14 | Plastering in C.M. 1:5 mix (one part of cement and five part of Sand) 12mm tk including mixing and finishing to a well smoothened surface, watering cost and conveyance all materials and all labour and other incidental charges and other incidental charges etc., complete.as per standard specification TNBPSS 56,57 |
| 15 | Plastering in C.M. 1:3mix (one part of cement and three part of Sand) 10 mm tk including mixing and finishing to a well smoothened surface, watering cost and conveyance all materials and all labour and other incidental charges and other incidental charges etc., complete.as per standard specification TNBPSS 56,57 |
| 16 | Supplying and filling in foundation andbasement with Well Gravel in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification. |
| 17 | Weathering course with concrete of broken Brick jelly in pure slacked lime over roof slab the proportion of brick jelly to lime being32 to 12.5well beated with wooden beaters for giving required slope& thicknessincludingcost and conveyance of all materials and labour charges and other incidental charges etc., complete as per standard specification |
| 18 | Finishing with top of roof with one course of machine pressed tiles of size 23cm x 23cm x 2cm of approved quality laid in cement mortar 1:3 (One cement and three sand) 12mm thick mixed with water proofing compound conforming to ISS by 2% weight of cement used and the joint pointed neatly to full depth of tiles with same water proofing compound mixed with cement motar ,red oxide, includingcost and conveyance of all materials and labour charges and other incidental charges etc., complete as per standard specification |
| 19 | Flooring withVetrified Tiles ofapprovedqualityincluding cost andconveyance of all materials and labour chargesand other incidental charges to site etc., complete.as per standard specification |
| 20 | Wiring with 2x1.5sqmm (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC Accessoires with TW switch box and 5A F.T. switch in flush with wall with 3mm thick hylum sheet cover for making good of the concealed portion with suitable colour for PVC concealed light point / fan point (For electronic regulator) (SD.NO.24) |
| 21 | Supply and fixing of single box type 4\"40 W fluorescent fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting. ofapprovedqualityincluding cost andconveyance of all materials and labour chargesand other incidental charges to site etc., complete.as per standard specification(SD 88) |
| 22 | Supply and fixing of 1200 mm (48\") sweep AC ceiling fan complete with stepped electronic 300W regulator,with 1 metre down rod with fan clamp with side plates and cross arm of size 450 mm (18\") (SD 106) |
| 23 | Supplying and fixing ofSteel door and gate using ISA Sections and MS Sheet ofapprovedqualityincluding cost andconveyance of all materials and labour chargesand other incidental charges to site etc., complete.as per standard specification |
| 24 | Painting two coats with Emulsion paint of approved colour and quality including cost andconveyance of all materials and labour chargesand other incidental charges to site etc., complete.as per standard specification |
| 25 | Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coatincluding the cost all materials etc.,complete, in all floors. |
