Tender For Repair And Maintenance Of Toilet At Rubber Board Regional Nursery, Alakode Including Purchase Of Materials; 1 Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer- in-Charge. Nominal concrete 1:4:8 leaner mix ( including equivalent design mix) 0.40 m3 1 m3 2 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge 2.00 no each 3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm/20mm nominal size) 0.40 m3 1 m3 4 Providing and fixing water closet squatting pan (Indian type W.C. pan) with suitable P or S trap, 10 liter low level white P.V.C.flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C pan of size 580x440 mm with integral type foot rests Hindware/Parryware 2.00 no each 5 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete (Johnson, Kajaria, Nitco) 300 x 450 mm or nearest available size 13.00 m2 1 m2 6 Providing and laying Ceramic antiskid floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete. 7.00 m2 1 m2 7 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 10kgf /cm2 5.00 m 1 m 8 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1m spacing. This includes the jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineerin-Charge 25 mm dia 10 Kgf/cm2- External work - Exposed on wall 5.00 m 1 m 9 Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.32 mm dia 10.Kgf/cm2 55.00 m 1 m 10 Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2 5.00 m 1 m 11 Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineerin-Charge 110 mm dia 6 Kgf/cm2 – External work- Exposed on wall 20.00 m 1 m 12 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend 2.00 no each 13 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes including jointing with PVC solvent cement 110x110x110 mm dia Tee 1.00 no each 14 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement – 110x110x110 mm dia Door tee 1.00 no each 15 Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia 45 degree Elbow 2.00 no each 16 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement-110 mm dia Door Elbow 2.00 no each 17 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore-Essess/Jaquar 2.00 no each 18 Providing and fixing PVC valve of standard design and of approved make - 32mm nominal bore - 2.00 no each 19 Supplying 1000lit capacity sintex titus white watertank 1.00 no each 20 Wall painting with premium acrylic emulsion paint of interior grade, to achieve even shade and colour - two or more coats Berger - Easy clean fresh/Asian - Apcolite premium emulsion/Nerolac 15.00 m2 1 m2 21 Painting with premium exterior smooth acrylic emulsion paint two coats for walls, underside of shades,roof projections etc. at all levels with approved brand acrylic emulsion paint. Colour to be got approved prior to the start of painting. No extra charge will be paid for providing scaffolding/ other means for painting at all levels. No extra charge will be paid for painting underside of shade, roof projections at all levels,scraping and cleaning the old surface etc.(Berger weathercoatlong life 10 / Asian paint -Apex-Ultima/ Nerolac- excel top guard) 28.00 m2 1 m2 22 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work at all levels(approved brands -1st quality synthetic enamel paint - Nerolac/Asian paints/ ICI/Berger/Jenson&Nicholson)after rubbing with sand paper and cleaning the surface 1.00 m2 1 m2 23 Laterite masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc. 0.75 m3 1 m3 24 12 mm cement plaster of mix: 1:4 ( 1 cement : 4 fine sand) 5.00 m2 1 m2 25 Providing and fixing brass bib cock of approved quality :20 mm nominal bore 2.00 no each
