Beautification Of Pampore Town.-Manufacturing supplying and fixing retro reflective overhead signage boards made up of 2mm thick aluminum sheet, face to be fully coveredwith high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type-III of ASTM-D-4956-01 as approved by Engineer-in-charge; letters, borders etc. as per IRC : 67-2001 in silver white with blue colour background and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class -II of ASTM-D-4956- 01 and fixing the same to the plate of structural frame work by means of suitable sized aluminum alloys, rivets or bolts and nuts @ 300mm c/c all along the periphery as well as in two vertical rows along with theft resistant measures including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminum sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawing, specification and direction of Engineer-in-charge (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment).Overhead informatory road signage. 2 Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded 3 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content.With ready mixed red oxide zinc chromatic on steel / iron works having VOC content less than 250 grams/ liter 4 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. 5 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work 6 Making of learning aid MURALS depicting Educational, Cultural, Geographical and other such learning artistic presentation by way of interior/exterior plastic dmulsion/silica based acrylic epoxy paints, synthetic enamel paint of brand, manufacture and shade and as per the pattern, design and graphics approved by the authorities & architect including make of requisite base/foundation (to receive actual painting by architect on selected and approved locations on walls ceilings windows panes complete inclusive of all labours and materials. 7 Dismantling Bituminous roadmanually/ mechanically including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: 8 Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : 9 Providing and laying of stone soiling dully hand packed including carriage of stone soling with loading unloading and stacking complete. 10 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 11 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 12 Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. 13 Brick work with common burnt clay F.P.S (non-modular) bricks of class designation 75 in foundation including curinginCement mortar 1:6 ( cement : 6 Fine Sand) 14 12mm Cement Plaster of mix: 1:6 (1 cement : 6 fine sand). 15 Painting runway / taxi track/ apron marking with adequate no. of coats to give uniform finish with road marking paint of superior make as approved by the Engineer-in-charge including cleaning the surface of all dirt, scales, oil, grease and other foreign material etc. and lining out complete. New work (Two or more coats) 16 Providing and laying gang saw cut of specified thickness, mirror polished pre- moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. 18 mm thick 17 Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-incharge. 18 Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 m height, backing filled with a grout of average 12 mm thick cement mortar 1:3 ( 1cement: 3 coarse sand) including pointing in white cement mortar 1:2 ( 1 White cement: 2 stone dust) with an admixture of pigment matching the stone shade and curing complete : (To be secured to the backing by means of cramps which shall be paid for separately):White sand stone - Exposed face machine cut and table rubbed with rough backing 30 mm thick red sand stone 19 Providing and fixing commissioning of PVC Lit LED Letters of height upto 36 and with upto 12 like I LOVE (♥ Heart)SAFFRON TOWN PAMPORE or similar words 3D type design with fitting including decoration with lighting of different colours including providing of multi coloured ambiance lights include commissioning of MCB/ Switch sockets, 2.5 sqmm wire and other fittings and finishing complete job. 20 Providing and fixing of black coloured Granite duly embedded and written with required letter writing of any size and shape including painting in golden colour on writing area as per directions of EIC such as WELCOME TO SAFFRON TOWN PAMPORE and THANKS FOR VISITING or similar words of any size and shape on including fixing and all carriages complete job etc. 21 Providing and fixing and laying of 12mm dia bolt with 8mm dia MS plate duly embedded in concrete for erection of ornamental poles at required distance as per directions of EIC complete job. 22 Providing and fixing and commissioning of outdoor LED strip light Water proof of different colours and approved brand with wiring of 1.5 sqmm, switch sockets, MCBs and other fittings etc complete job. 23 Providing and fixing and commissioning of retroreflective water proof adhesive tape of standard quality and different colours at ornamental poles and other locations complete job etc. 24 Supplying and stacking of graded stone aggregate at site of size 63-45mm size, (quarry Woyen), stone screenings, chippings,13.2mm nominal size (Type-A) & moorum (stone dust) including Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening /binding material to fill up interstices of coarse aggregate, watering and compacting to the required density 25 Carriage of different materials from source to site of work.by MT 26 Sand and Stone Aggregate.for an average lead of 5 kms. 27 Bricks 28 Supply installation testing and commissioning of Heritage architectural ornamental decorative cast iron pole as per specification/ drawing (enclosed) Dwarka make /Karara Mujasame or of Equivalent standard Make with the following specifications: The pole shall look like as shown in the drawing. It shall have all similar features as shown in the enclosed drawing/picture. The Cast Iron Poie of 3 ivitr (5000mm) lorigth. The pole has ornamental base (Approx. overall dimension-heiglit 1050mm,bottom Idia 370mm) shall have a provision of inbuilt junction box for fixing MCBS for cutouts with detachable window cover. The part above ornamental base design consists of decorative sections of circular shapes & collar in different dimension, is made of cast iron in fine linish. The design of the cast-iron parts is clearly shown in the drawing. iMentioned dimensions are proposed dimensions, which may vary with actual measurements (Tolerance of ±5%) Further the pole shall be got approved by the concerned engineering wing afteries and the Inverter. (Complete job) of work and the test certificate to be provided by the manufacturer. 29 Supply and fixing of ornamental Cast iron 2 way bracket painted with anti corrisive enemal paint as per design, of Dwarka india /Karara Mujasseme of equivalent make/design (as per enclosed drawing! The bracket should have a provision of fixing luminaries of Glowmac/Green arrow. Further the bracket shall be got approved by the concerned engineering wing after providing a sample before execution of work and the test ceralicate to be provided by the manufacturer. 30 Providing of Reinforced cement concrete foundation as per specifications/enclosed drawing including foundation nuts & boliai is te paid seperately of required size welded together firmly with reinforcement properly, cement concrete to be corried in 1:2:4 mix. 31 Suppty fixing testing and comm.of decorative ornamental translucentluminarie having IP-65 protection (glowmac [Amphore-PRISMATIC-A-300PC-201 bajaj/havellequivalent make. 32 S/F/T/C of 18-22 Watt LED Philips/ Havell/Finolea /Crompton greaves Equivalent make 33 S/F/T/C, testing and commisioning of PVC altumimum armoured cable 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments.Haveli/Eq. standard make as directed by engineer Incharge and making end termination with brass compression gland and aluminium lugs of required size. 34 a) 10 sq.mm 4 core 35 Providing af service connection and earthings to luminaire from the junction box In 1.5 mm PVC insulated, multicolour copper wire (FRLSH) 36 Earth work for excavation for cable trench 2ft deep with an average breadth of 1.5ft and refilling of trench with excavated earth after laying of cable and ramming It properly excluding cost of cable the job also includes laying of warning tape. 37 Supply and installation of Spiral Earthing through 10 swg GI wire after driving in ground up to a depth of 3 in the ground from the base of the pole. 38 Providing of Chemical earthing as per IS standards by way of digging 10 deep pit then embedding 2 meter G.l Earthing electrode, 80mm dia. connecting the plate with main control board by 10 SWG copper wire with 1/2 dia. Full thread brass nut and bolt and washers. Refilling of pit with chemical compound. 39 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting the concrete path wherever required, jointing etc.direct in ground Including excavation and refilling the trench (with cement concrete to be paid seperately), making the surface level but excluding sand cushioning and protective covering etc., complete as required. 40 63 mm dia (OD-63 mm & ID-51 mm nominal) 41 Design, Supply installation testing and comm. Of control pannel of sultable size made out of 2mm thick M.S. sheet, vermin and dust proof, outdoor type, sireei sieel, powder coated phosphatised having angle iron stand fitted with following accessories to be grouted in the cement concrete, complete job the panel to be fabricated from reputed firm duly approved by CPRI.as per approved design, size may vary as per site requirement) 42 a) 100 amp 4 strip bus 1 No 43 (b) A/V meters set / indicators 44 (c) Astronomical timer with 4 pole contactor of suitable capicity. Legrand/LBT/ABB make 45 (d) MCB TPN 40-63 amp 3 NO. 46 Supply installation testing and commissioning of Flexible waterproof with IP68 rating, Silicon made, LED Rope light 6 watt per meter,400 Im/Mt,72 LEDs per Mtr, Color: Warm White/Yellow, along with accessories surface, using high brigittness SMD LED as the light source suitable for decorative lighting along with suitable LED driver for providing power supply to the LED strip. Prefered make Philips/wipro/Crompton/Equivalent standard make.(sample to be approved before installation) 47 Supply installation testing and comm. of flood light 50 W (warm, white, Epoxy powder coated die-cast aluminium housing (LM24) with elegantly designed heat sink for efficient thermal management, sturdiness & excellent corrosion resistant. PG9 gland is used for cable entry and provision for loupin-longout class 1, IP66, IK 07, with high power LEDs as light source with Built-in Potted IP67 electronic LED driver with APFC, lower THD, toughned glass and secondary lens, Open Circuit Protection, Over Voltage Protection, Surge Voltage Protection upto 10kv With Built in SPD & other safety test as per IS 15885 Part-2/5ec 13, IEC60598-1. Preferred make: Philips/ Havell (JETA QUANTO PLUS MONO 50 W)/Wipro/Crompten make. the job also includes the angle Iron stand of suitable size to be grouted in cement concrete with hold fasteners complete job.
