Tender For Various Mechanical And Electrical Works For Safety Purpose At Vileparle Fire Station Vile Parle East In Keast Ward - Providing, detailing, fabricating and fixing at desired location using hot rolled sections and MS Plates of grade Fe 250 as per specifications and approved fabrication drawings (which are to be prepared by Contractor and got approved from Engineer), transporting to site and erecting structural steel members for all heights & at all levels including provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, gussets, base plate, and all necessary fixtures and operations likepreheating as per specifications, straightening, bending, cutting, drilling, grinding, machining if specified, welding, grinding and removing the welding burr and preparing surface for painting with wire brush cleaning and applying two coats of epoxy red oxide zinc phosphate primer of 30 microns each and two coats of Epoxy Corrosion Resistant Enamel paint of 30 microns after fabrication including touching up with spray painting after erection etc complete as directed by Engineer In Charge. (Theqty. for this item shall be measured for gusset plates, base plates, bolts in M.T.) 2 R3-CS-SS-04 Providing, detailing, composite fabricating members like Trusses, N-girders, girders, bracings, supports, purlins,runners, and similar structural steel members fabricated using M.S. hollow tubular steel sections (circular & rectangular pipes), of TATA Structura Make or equivalent conforming to IS 1239 part 1 and 2 and of grade Fe 250 as per specifications and approved fabrication drawings (which are to be prepared by Contractor and got approved from Engineer), including transportion of the same to site, erection of structural steel members for all heights & at all levels, provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, gussets, base plate, and all necessary operations like preheating as per specifications, straightening, bending, cutting, drilling, grinding, machining if specified, welding,grinding, removing the welding burr and preparing surface for painting with wire brush cleaning and applying two coats of epoxy red oxide zinc phosphate primer of 30 microns each and two coats of Epoxy Corrosion Resistant Enamel paint of 30 microns after fabrication including touching up with spray painting after erection etc complete as directed by Engineer In Charge. 3 R3-CS-RW-09-a Providing and fixing single skin trapezoidal profiled sheeting ..etcProviding and fixing single skin trapezoidal profiled sheeting 930 - 1020mm cover width 28-32 mm crests depth at 186-250 c/c ( above 195 mm c/c crest distance there will be minimum 2 ribs at the centre for stiffening). The feed material shall be manufactured from AZ 150 (min. 150 gms/sq.mt total on both sides) Zincalume / Galvalume sheets of minimum yield strength of 550 MPa, 0.45 mm BMT, ( 0.5 mm TCT excluding paint coating thickness), metallic hot dip coated with Al- Zn alloy (55% Aluminium, 43.5% Zinc, 1.5% Si ) as per AS 1397 / IS15961 & painted with Super Durable Polyester Colorbond steel XRW or equivalent quality paint system of apporved color, suitable for exterior application conforming to AS/NZS 2728:2007 type-4 / IS15965:class3 of approved make. The sheet shall have a total coating thickness of 35 microns, super durable polyester paint system of 20 microns on exposed surface and 5 micron reverse polyester coat on back surface over 5 micron primer coat on both surfaces. The paint system shall have stable inorganic pigments for color durability. The product will be fastened using no.12-14x55 mm (or as per design requirement ), mechanically coated with 25 micron Zn-Sn alloy or hot dipped zinc coated with min 40 micron hex self-drilling fasteners with EPDM washer of approved make confirms to AS3566:2002 class 3.Bare Galvalume/zincalume sheets for roofing 4 R3-Cs-Sl-04Providing and fixing in position collapsible steel gates with verticalchannels 20 x 10 x 2 mm & braced with flat iron diagonals 20 x 5mm size, top & bottom T section 40 x 40 x 6 mm size, 30 mm steel pulleys complete with bolts-nuts, locking arrangements, stoppers, handles and painting with one coat of red oxide zincchromate primer and two coats of synthetic enamel paint including all labour, materials, tools and equipments,etc complete asdirected by Engineer Incharge. 5 R3-ME-4-28-bSITC LED flood light 210 W ( make bajaj) 6 R3-ME-1-14-e IP 42 Wall/column Mounted distribution board with one Nos of16A DP MCB as incomer and 4 Noss 6/10A SP MCB as outgoing(8way SPN DB) 7 R3-ME-1-17-I 32A DP MCB 8 R3-ME-1-17-c16A/20A SP MCB 9 R3-ME-4-12-d Ceiling fan of 1200 mm sweep with all accessories including Electronic Regulator for completing installation 10 R3-ME-4-12-s Fan safety rope/ Fan wire. 11 R3-ME-4-12-oPedestal fan of 450mm sweep, 230 Volts,AC 50 Hz, oscillating type complete with guard and regulator 3 mtrs. of 3 core 1.5sqmm, PVC insulated , copper conductor , flexible wire and Hand shield type 3 pin plug top. 12 R3-ME-2-11-b Cable End Termination For Aluminium Cables –2C x 6 Sq.mm 13 R3-ME-2-1-c 1st category Al armoured cables FRLS outer sheathed- 2C x 6.0 Sq.mm 14 R3-ME-3-27-a Light /Fan / Ex. fan Points 15 R3-ME-4-31-dLED Gate post fitting 16 R3-ME-4-31-c Garden Light LED Luminiare Bollard Type 17 R3-ME-1-20-c 75mm x 75mm x 75mm size GI Junction box with kNosck out &1 Nos. 5Amp. SP switch for local ON, OFF operation 18 R3-ME-2-21-c Supply & laying I.S.I. mark B class GI Pipe for surface / underground cable protection25 mm 19 R3-CS-RM-99P/F Aluminium composite sheet of 3 mm thick eithersuspended orfixed bracketed on wall with U.V digitalprinting at suitable locnincluding all necessary frameworkcompleted as per detailed drawings to be issued duringconstruction & as directed by theengineer. 20 R3-CS-Rm-143Providing & Fixing 15 mm thick solid white acrylic laser cut out BMC Logo etc.complete. 21 R3-CS-RM-142-B Providing & Fixing signage made of 15 mm thick solid white acryliclaser cut out letters for height up to 39 etc. 22 R3-ME-4-34-h SITC of IP67 flexible 24 V linear LED strip Color temperature(CCT) 23 R3-ME-1-19-a 16/32 Amp. DP MCB 24 R3-ME-1-21-a sheet moulding compound SMC junction box for outdoor Use SMCJB-1414 Hinged cover size 25 R3-CS-SS-13 Galvanized Chain Link Fencing of 10 gauge G.I. Mesh, sizes50 x 50 mm diamond pattern, fixed 75 mm below finished 26 R3-CS-DD-14Dismantling steel work in built up sections in angles, tees, flats and channels of rolling shutters, grills, gates, fencing, hoardings, including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50metres lead.
