Supply And Fixing Of Furniture At Salim Durrani Residential Sports School, Nayapura, Kota Supply Work - Supply & installation Conference Table size 1000L*6000*750H in mm, Table Top made of 36mm Thick Particle board Round Post form top With 2mm Thick PVC Edge banded Finish With As Per Approved Laminate Shade, Connection Tops of conference table made of MDF Board of size 600W x 600D x 25mm Round postform Pasted With 0.4mm Thick black PVC Membrane on Board, Gable - Ends of the table Made Of 25mm Thick PLPB twin Board designed with similar to the photograph, Modesty Panel Prime Quality 25mm Thick 718mm High PLPB Board Supported To Top & Gable ends, 7mm High PVC Buffers Screw With Gable-end, PVC Wire manager provide on top, 18mm thick PLPB cable tray should be provided below top, All Wooden Panels. Gables & Modesty Fix Joints With Minifix Dowels & Other Fitting Equipment All Wooden Panels Prime Quality Board With ISI Marked. IS:12823:1990. The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design. As Direction by Engineer-in-Charge 2 Supply & installation of High Back Revolving Chair, Overall Dimension:- 710W ±10 x 710D ±10 x 1210H ±10 mm,Seat of High back chair is made of 12mm thick hot pressed plywood pasted with PU Moulded foam with Fabric upholstery on Seat , Used PU Moulded foam on Seat of D-45 kg/m3 , Back of High back chair is made of Injection moulded PP material structure upholstered with Mesh fabric , Adjustable Lumber support upholstered with fabric ,Headrest on back Upholstered with Fabric , Seat Size:- 460W ±10 x 455D ±10 x 70Thick. ±5 mm , Back Size:- 470W ±10 x 710H ±10,Mechanism:- Syncro Tilt Mechanism ,Gaslift:- Lift -Used gaslift of 90 mm ,Armrest:- PU Padded adjustable armrest , armrest fixed with Seat,Chair Base & Wheels:- Metal chrome plated Chair Base , base consists of 5 prongs with 650±5 mm pitch circle diameter, 50mm Dia. Black Nylon - Twin Wheel Pin castor .The product should bear IGBC Green Pro certificate for product category.And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design. 3 Supply & installation Medium Back Revolving Chair, Overall Dimension:- 720W ±10 x 720D ±10 x 1070H ±10 mm,Seat of Medium back chair is made of 12mm thick hot pressed plywood pasted with PU Moulded foam with Fabric upholstery on Seat , Used PU Moulded foam on Seat ofD-45 kg/m3 , Back of High back chair is made of Injection moulded PP material structure upholstered with Mesh fabric , Seat and back connected through metal powder coated plate, Adjustable Lumber support upholstered with fabric , Seat Size:- 470W ±10 x 470D ±10 x 70Thick. ±5 mm , Back Size: 525W ±10 x605H ±10,Mechanism:- Synchro tilt Mechanism ,Gaslift:- Lift -Used gaslift of 90 mm,Armrest: PU Padded Adjustable armrest fixed,Chair Base & Wheels: Metal chrome plated Chair Baseconsists of 5 prongs with 650±5 mm pitch circle diameter, 50mm Dia. Black Nylon - Twin Wheel Pin castor.The product should bear IGBC Green Pro certificate for product category.And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design. 4 Supply & installation Two seater Sofa , Overall Size 1400W X 750D X 750H , Sofa structure made good quality solid wood of size 38x25mm Uphostered With Leatherite & HD Foam used in seat & Back density 32 KG/m3, Sofa base Supported on metal legs , Sofa Back Height from ground is 750mm , The rounded Armrests Provided with Sleek And Stylish Look, complete Understructure Made of Solid Wood Structures With Heavy duty zig zag Spring For Maximum Comfort, Seat Height From Ground 460mm , 100mm High Legs . The product should bear IGBC Green Pro certificate for product category.And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design. 5 Supply & installation of Three seater Sofa , Overall Size 1920W X 750D X 750H , Sofa structure made good quality solid wood of size 38x25mm Uphostered With Leatherite & HD Foam used in seat & Back density 32 KG/m3, Sofa base Supported on metal legs , Sofa Back Height from ground is 750mm , The rounded Armrests Provided with Sleek And Stylish Look, complete Understructure Made of Solid Wood Structures With Heavy duty zig zag Spring For Maximum Comfort, Seat Height From Ground 460mm , 100mm High Legs . The product should bear IGBC Green Pro certificate for product category.And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design. 6 Supply & installation of Centre Table Overall Size 1215W X 605D X 450H mm, Table Top Made Of Veneer & Melamine polish, Inner material used in Table top is 18mm thickness commercial block board & prime quality veneer pasted on it with Melamine polish, Table Top Size 1215W X 605D X 18mm Thickness, Teak colour Veneer pasted on table top, Legs made up of solid teak wood material of size 60W X 60Dmm, Under structure Top Supported Panel Made Of Prime Quality Solid teak Wood material of size 60x20mm, complete structure are in Melamine polish, commercial Board Use Prime Quality With ISI Marked , All Wooden Panels Cleaning Corner Knitted Finish , Wooden Panel Joint Leg To Leg Supported To Top . The product should bear IGBC Green Pro certificate for product category.And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design. 7 Supply & installation of Three Seater Waiting sofa Overall Size 1800W x 670D x 785H , Seat Height 425mm , Seat & Back made of 1.2mm thick perforated sheet metal duly powder coated , seat & back cushioning made of Wooden Structure 6mm Ply (Hot Pressed) with foam upholstered With Leatherette , Seat & back made of CRCA Sheet Perforated (Base & Back Are In Single L Shape With Radius At Bend) Powder Coated In Silky Silver & Covered By Cushion , Base Frame Beam 80H x 40W x 1795L 1.82mm Thick , Height of the seat from floor 425mm, Beam MS ERW Rectangular Tube Black Powder Coated , Leg Chrome Plated Rectangular MS Structure , Bow Shaped 1.2mm Thick Sheet , 1.2mm Thick Arm Rest Chrome Plated Rectangular MS Structure, Perforated Seat & Back fixed with MS Brackets duly powder coated , Beading Chrome Plated Ms Channel Beading , Level Adjuster Chrome Plated MS Cap With PVC Inserted Black Colour , All Pipes Shall Be Welded Properly Strongly and conformity with regulations. 8 Supply & installation of Two Seater Waiting sofa Overall Size 1190W ±10 x 670D ±10 x 785H ±10 , Seat Height 425mm, Seat & Back made of 1.2mm thick perforated sheet metal duly powder coated , seat & back cushioning made of Wooden Structure 6mm Ply (Hot Pressed) with foam upholstered With Leatherette , Seat & back made of CRCA Sheet Perforated (Base & Back Are In Single L Shape With Radius At Bend) Powder Coated In Silky Silver & Covered By Cushion , Height of the seat from floor 425mm, Beam MS ERW Rectangular Tube Black Powder Coated , Leg Chrome Plated Rectangular MS Structure , Bow Shaped 1.2mm Thick Sheet , 1.2mm Thick Arm Rest Chrome Plated Rectangular MS Structure , Perforated Seat & Back fixed with MS Brackets duly powder coated , Beading Chrome Plated Ms Channel Beading , Level Adjuster Chrome Plated MS Cap With PVC Inserted Black Colour , All Pipes Shall Be Welded Properly Strongly and conformity with regulations .The product should bear IGBC Green Pro certificate for product category.And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design. 9 Supply of visitor’s chair of Godrej/Methodex/Bluebell make and equivlent having following specifications. The seat is to be made up of 12 MM thick hot pressed plywood upholstered with Fabric and molded polyurethane foam. The back to be made up 12 MM. thick hot pressed plywood upholstered with Fabric and molded polyurethane foam. The back ply and foam is designed to provide maximum lumber support for comfortable seating posture. DIMENTIONS: Height (mm) 840, Depth(mm) 600, Upholstery used Fabric, BASE SEAT : 495W X 460D/L X 55 THICKNESS (MM)BACK SEAT : 480 W X 450 L X 50 THICKNESS (MM) POLYURETHANE FOAM: The polyurethane (High density) foam for seat is moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +/- 2.ARMRESTS: Type PU, Handle Out(mm) 550, Handle 10 Supplying and fixing wood work in frames of wall panelling, false ceiling partition wall etc. as per approved design and drawing including antitermite treatment.Hollock wood Grade - I. 11 Add extra in frames for circular members such as in fan lights, staircase railing etc. 12 Providing & Fixing Commercial Ply as per IS 710 : 1976 BWR of approved make for making wardrobe/shelves and other furniturewith fevicol & nails completeas per approved by engineer in charge. 13 18 mm thick for beds 14 for study table 15 BED 16 6 mm thick 17 Providing & Fixing mica of approved make for inner/outer side of shutters with fevicol & nails completeas per approved by engineer in charge. 18 0.8mm thick mica 19 Providing & Fixing decorative veneer of approved make for inner/outer side of shutters with fevicol & nails completeas per approved by engineer in charge. 20 4.0mm thick veneer 21 6.0mm thick veneer 22 Providing & Fixing drawer handle of approved make for drawers with screws completeas per approved by engineer in charge. 23 100mm long 24 150mm long 25 Providing & Fixing drawer lock of approved make for drawers with screws completeas per approved by engineer in charge. 26 Providing & Fixing telescopic channel of approved make for drawers with screws completeas per approved by engineer in charge. 27 600mm long 28 Providing & Fixing of ward robe shutters made out of 19mm thick BWP block board ISI of superior quality make with following details :-Front side finishing with 1mm thick superior quality mica approved make and 0.8mm thickapproved shade mica in the inner side. Covering with teak wood beading 25x12mm all the sides of shutter & 35x12mm on outer frame for making good the wall joint including heavy brass S.S. fittings (Handle 200mm 2 Nos., Tower Bolt 150mm 2 Nos., Brass Lock 1 Nos., Magnetic Catcher 2 Nos., Brass Hinges 75x40x2.5 mm 6 Nos., SS Hanger Rod 20mm dia)complete as per drawing and design approved by Engineer in Charge. 29 Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide 30 bed+ table 31 Extra if square,rectangular hollow tubelarsections are used or grill made by flats only 32 Painting with synthetic enamel paint of approved brand and manufacture togive an even shade : 33 Two or more coats on new work 34 Supply of “ Computer Table” of Modular nature having all the necessary arrangement for keyboard, CPU, UPS, Printer and wire manager Table Top :The table top of size 900 x 600mm(WxD) would be made out of post formed on 25 mm thick particle boardwith 0.7mm thick Carvica sheet in half round post formed finish on the front and rear side, matching color compensating laminate fixed on the bottom side. Other two sides are edge banded and duly sealed with 1.5 mm thick PVC edge banding of matching color with high pressure through feed machine. Keyboard Below the table top the keyboard pull out tray having sliding arrangement fixed on side supporting legs with 450mm G.I. telescopic channel. Keyboard of size 750 x 450 made out of 18 mm thick Particle board laminate with 0.7mm thick laminate sheet having all four sidesFlat edge banded and duly sealed with 1.5 mm thick PVC edge banding of matching color with high pressure through feed machine.Side Support:Two supporting side leg of size 600 x 750mm(WxH) made out of post formed on 18 mm thick particle board with 0.7mm thick Carvica sheet in half round post formed finish on two sides and other two sides are edge banded and sealed with 1.5mm thick PVC edge banding of matching color with high pressure through feed machine.Modesty Panel : Made out of18 mm thick Particle board laminate with 0.7mm thick laminate sheet of size 900 x 750mm(WxH) having all four sidesFlat edge banded and duly sealed with 1.5 mm thick PVC edge banding of matching color with high pressure through feed machine. PU, UPS & Printer PlacesTable having the provision for CPU of size 300 x 600 x 600mm(WxDxH) below the table top on the right side of table adjoining to this on left side below the table the provision for UPSof size 450 x 600 x 250mm (WxDxH)and above this the provision for the Printer and stationary having overall dimension of450 x 600 x 300mm(WxDxH). All this is made out of 18 mm thick Particle board laminate with 0.7mm thick laminate sheet having all four sidesflat edge banded and duly sealed with 1.5 mm thick PVC edge banding of matching color with high pressure through feed machine.Allthe parts of the table are duly fixed with mini fix dowel system with each other having matching drilled holes to be made on CNC multi hole boring machine for proper matching and alignment of the different part of the table, 4nos. of Self Adjusting level screw of size 45 x 6mm are provide at the bottom of the both legs for the proper leveling of the table. 35 Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:Cement Mortar 1:6 ( 1-Cement : 6-Sand). 36 Brick masonry with F.P.S. bricks of class designation 75 infoundation and plinth with bricks Cement mortar 1 : 6 (1 cement : 6 coarse sand) 37 Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. 38 Jhunjhunu / Jalore (Red/Choclate/Black/Pink Colour) 39 Above 3601 Cm2 Slabs2*8 40 Extra for providing edge moulding to 15-18mm thick marble/ Granite/Kota stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite/Kota Stone WorkFull Edge moulding 41 Structural steel work riveted,bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete: 42 Providing and installation of Poly Carbonate Sheet roofing over existing steel framing as per drawing and design including fixing with non-corrodible nuts and water proof washers as per instruction of Engineer-in-charge. 43 6 mm thick 44 Providing and fixing stainless steel railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 45 Grade 304
