Proposed Estimate For Repairing Of Palashdanga Ssk Fund (Apas) 2025-26 Under Tirat Gram Panchayet Priority No-01 Apas Scheme Id-Apas/01/280/232/0001, Paschim Bardhaman-West Bengal

Proposed Estimate For Repairing Of Palashdanga Ssk Fund (Apas) 2025-26 Under Tirat Gram Panchayet Priority No-01 Apas Scheme Id-Apas/01/280/232/0001-Dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m. a) In ground floor including roof. PAGE NO-10, ITEM NO-06 Steel door & Winow Reparing including the cost of material &labour all complete (a) M.S.or W.I. Ornamental grill/door of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (i) weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.(Is) PAGE NO-104,ITEM NO-13 TOTAL-- 0.750 (1) Cement concrete with graded stone ballast (40 mm size excluding shuttering) In ground floor (A) [Pakur Variety] (a) 1:3:6 proportion 22 & P34 of 315 TOTAL- 3.060 Removing old scales, blisters etc. of interior surface of walls, ceiling by scraping etc. and preparing smooth and even surface with rendering or cement mortar (1:2) (as necessary), to make the surface suitable for receiving distemper. (Payment against this item will be made only when this has been done on the specific direction of the Engineer-in-charge PAGE NO-198, ITEM NO-04 .Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturers specification PAGE NO- 197, ITEM NO-15 Scraping of moss, blisters etc. thoroughly from exterior surface of walls necessitating the use of scraper, wire brush etc. (Payment against this item will be made only when this has been done on the specific direction of the Engineer-in-charge). PAGE NO-198, ITEM NO-01(B) Item no.-1(i),c page-189(Analysis) Plastering with sand and cement mortar ( prop. 1: 4) including rounding off or Chamfering corners as directed and raking out joints or roughening of concrete surface including chipping and application of cement slurry where necessary etc. 20 mm thick cement plaster in 1:6 Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. PAGE NO-11, ITEM NO-10 Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. includingusing of approved putty etc. on the surface, if necessary: On steel or other metal surface: With super gloss (hi-gloss) -iv) Two coats (with any shade except white) PAGE NO-200, ITEM NO-2 Supplying, Fitting & Fixing 30 mm thick Factory made solid Panel PVC Door Shutter consisting of outer ft ame out of M.S. tubes of 19 gauge thickness and size 19 mmx19 111m for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, MS, frame covered with 5 mm th. heat moulded PVC C channel of size 30 mm th, 70 width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out Of which 75 mm shall be flat and 20 mm tapered in as degree on the inner side to form top & bottom rail and 115 mm Wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and tock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm wide cross PVC sheet as gap insett for top rail and bottom rail. Paneling of 5 mm th. Electrification with light fan wearing Display work and unforseen items

INR 250 /-

INR 1.50 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB