|
| 1 | Coronary Angioplasty and Coronary Angiography FDA/CE/DCGI |
| 2 | Left Judkins Guiding CatheterShould be available in 5F/6F/7F/8F in various standard curves (3.0/3.5/4.0/ 4.5/ 5.0) & lengths |
| 3 | Right Judkins Guiding CatheterShould be available in 5F/6F/7F/8F in various standard curves (3.0/3.5/4.0/ 4.5/ 5.0) & lengths |
| 4 | Amplatz left Guiding CatheterShould be available in 5F/6F/7F/8F in various standard curves (AL1/AL2/AL3) & lengths |
| 5 | Amplatz Right Guiding CatheterShould be available in 5F/6F/7F/8F in various standard curves (AL1/AL2/AL3) & lengths |
| 6 | Multipurpose Guiding CatheterShould be available in 5F/6F/7F/8F in various standard curves & lengths |
| 7 | Extra Back Up Guiding CatheterShould be available in 5F/6F/7F/8F in various standard curves (3.0/3.5/ 4.0) & lengths |
| 8 | IMA Guiding CatheterShould be available in 5F/6F/7F/8F in various standard curves & lengths |
| 9 | Coronary Bypass Graft Left Guiding CatheterShould be available in 6F/7F/8F in various standard curves & lengths |
| 10 | Coronary Bypass Graft Right Guiding CatheterShould be available in 6F/7F/8F in various standard curves & lengths |
| 11 | Vista Brite Radial CatheterShould be available in 6F/7F/8F in various standard curves & lengths |
| 12 | Brachial Catheter (Sones Technique) S IShould be available in 5F/6F in various standard curves & lengths |
| 13 | Brachial Catheter (Sones Technique) S IIShould be available in 5F/6F in various standard curves & lengths |
| 14 | Brachial Catheter B I/B II/ B IIIShould be available in 5F/6F in various standard curves & lengths |
| 15 | Brachial Catheter CAS I/ II/IIIShould be available in 5F/6F in various standard curves & lengths |
| 16 | Heartrail II Guide Catheter 5F/6F/7F in various standard curves & lengths |
| 17 | TigerGuiding CatheterShould be available in 5F/6F in various standard curves & lengths |
| 18 | 2 Port Color Coded Manifold with left-off/right oforientation 250 pascal per square inches – 500 pascal per square inches rating and wide port spacing. Clear polycarbonate body to provide durability and visibility Airless rotator and large bore inner lumen throughout– DCGI Approved |
| 19 | 3 Port Color Coded Manifold with left-off/right oforientation 250 pascal per square inches – 500 pascal per square inches rating and wide port spacing. Clear polycarbonate body to provide durability and visibility Airless rotator and large bore inner lumen throughout– DCGI Approved |
| 20 | PTFE Precoated wire. In diameter 0.035 inches.Length 150 cm and 260 cm long.Available as straight & J-Shaped tip.DCGI Approved |
| 21 | Hydrophilic coating on Tungsten Blended PU Jacket with core made up of Nitinol. In diameter 0.035 inches. Length 150 cm and 260 cm long.Available as straight & Angled tip. DCGI Approved |
| 22 | Tip-Sharp Half moon Bevel shape diamond cutting. 15 G 7 cm 20 G 4 cm. DCGI Approved |
| 23 | Ultrasharp electropolished pointed tip. Thin walled construcation, radiopaque in nature cannula made up of clear polyurethane . Hub shape Round mini wings/no wings with flash plug. 20G,21G 3.2 cm and 4 cm – DCGI Approved hili. |
| 24 | Radial Artery Band :-Material : Latex –free , medical –grade with Velcro straps. Compression pressure : Adjustable up to 30 mm Hg. Syringe with Fixed Luer Lock “Blisterr packed. |
| 25 | 3 port manifold with rotator end R&L and attached tubings (Angio Kit) Three side port manifold one connector tubing for connecting manifold to Tuohy Borst one luer lock control syringe (10 or 12 ml) for contrast injection Two large bore tubing (with flow regulating knob) for withdrawing contrast &saline one three way stop |
| 26 | Renal Single Curve Guiding CatheterIn various standard French, lengths & curves |
| 27 | Renal Double Curve Guiding CatheterIn various standard French, lengths & curves |
| 28 | Renal Guiding Catheter (6F/7F/8F)Should have length ranging from 55-90 cm |
| 29 | Head Hunter Catheter (100 cm long)In various standard lengths & curves 0.035 ‘’-0.038’’ compatible |
| 30 | Simmons Catheter (100 cm long)In various standard lengths & curves 0.035 ‘’-0.038’’ compatible |
| 31 | Pre shaped catheter for uterine artery embolization In various standard lengths & curves |
| 32 | Vertebral CatheterIn various standard lengths & curves |
| 33 | Coeliac axis CatheterIn various standard lengths & curves |
| 34 | Shepherd’s Hook catheterIn various standard lengths & curves |
| 35 | Cobra Catheter (4F/5F/6F)In various standard lengths & curves |
| 36 | VTK Diagnostic Catheter (5F/6F)In various standard lengths & curves |
| 37 | Angiographic sizing pigtail catheter (4F/5F/6F/7F) |
| 38 | 3D Space RCA angiographic Catheter |
| 39 | Mother & Child CatheterHave Reliable Support with Large Inner Lumen And Inner PTSE |
| 40 | Intubation Catheter For Assisting Delivery of Stent in Difficult Anatomies |
| 41 | PTCA Wire (S. No. 02) |
| 42 | PTCA Guide Wire – Regular Length, Regular Shaft Support and Floppy Tip |
| 43 | PTCA Guide Wire – Regular Length, Extra Shaft Support and Floppy Tip |
| 44 | PTCA Guide Wire – Exchange Length |
| 45 | PTCA Guide Wire – Hydrophilic Coated, Regular Length |
| 46 | PTCA Guide Wire – Hydrophilic Coated, Exchange Length |
| 47 | Special PTCA Guide Wire With Elastinite Core and Stainless Steel Shaft supportBoth Regular and Exchange Length Wires.-= 5 Should have Wires with varying Degree of Staft Support |
| 48 | Special PTCA Guide Wire With Dual CoatingShould have distal hydrophilic Coating and Proximal Hydrophobic Coating.Should have Wires with varying Tip Stiffness and Variable Shaft Support. |
| 49 | Special PTCA Guide wire with Multiple Markers for Measuring the length of Stenotic segment. |
| 50 | PTCA Guide Wire for Chronic Total Occlusion mandatory in CTO (CTO) |
| 51 | PTCA Guide Wire for Chronic Total Occlusion (CTO) |
| 52 | Heavy Duty Nitinol Alloy Extra Support Wire (Regular Length 180 cm Long)0.014 Inches with Angled Tip 3-5 cm Long.Tip with Platinum/ Platinum Alloy for Optimum Visualization With TEE Coating. |
| 53 | Heavy Duty Nitinol Alloy Extra Support Wire (Regular Length 270-300 cm Long)0.014 Inches with Angled Tip 3-5 cm Long.Tip with Platinum/ Platinum Alloy for Optimum Visualization With TEE Coating. |
| 54 | Heavy Duty Nitinol Alloy Extra Support Wire (Regular Length 180 cm Long)0.018 Inches with Angled Tip 3-5 cm Long.Tip with Platinum/ Platinum Alloy for Optimum Visualization With TEE Coating. |
| 55 | Heavy Duty Nitinol Alloy Extra Support Wire (Regular Length 270-300 cm Long)0.018 Inches with Angled Tip 3-5 cm Long.Tip with Platinum/ Platinum Alloy for Optimum Visualization With TEE Coating. |
| 56 | Steerable High Support 0.014 Inch Guide wire (180 Cm Long)PTEE/Dura Glide CoatedDistal Radio Opaque Tip 3 Cm Long Straight and J Curve |
| 57 | Steerable High Support 0.014 Inch Guide wire (260-300 Cm Long)PTEE/Dura Glide CoatedDistal Radio Opaque Tip 3 Cm Long Straight and J Curve |
| 58 | PTCA Wires with Facility of Boot Links for Extension of Regular wire |
| 59 | Exchange Length PTCA Wire with Marker Sizes : 0.014’’ & 0.018’’0.035\"\"&0.038\"\" |
| 60 | Special Non Tapering PTCA Guide Wire For CTO with Patinum Iridium Distal Spring Core.Wires Available in Variable Distal Tip Stiffness, measured in Terms of Grams |
| 61 | Special Tapering PTCA Guide Wire For CTO with Patinum Iridium Distal Spring Core.Wires Available in Variable Distal Tip Stiffness, measured in Terms of Grams |
| 62 | Special Tapering PTCA Guide Wire For CTO with Hydrocoat-Hydrophilic Coating.Wires Available in Variable Distal Tip Stiffness, measured in Terms of Grams |
| 63 | Special Hydrophilic PTCA Guide Wire For CTO withSuper Elastic Alloy (Ni-Ti)Core.Polyurethrane Hydrophilic Distal Coating. |
| 64 | Extension (Doc) wire for Approved Regular Length PTCA Guide Wire |
| 65 | Penetration Catheters for CTO having Rotational Blunt Penetration. |
| 66 | Micro Catheter to be used in CTO for Ante grade Approach (Fine Cross/Corsair/Tornus Type) |
| 67 | Guide Extension Catheter (Guide Zilla Type)120 Proximal Hypo Tube Shaft.0.57 Inner Diameter & 0.066’’ Outer DiameterShould be with Proximal Marker and 1 x 1 Braiding. |
| 68 | Guide Liner Catheter |
| 69 | Double Lumen Micro Catheter (Crusade type) |
| 70 | Guide Extension Catheter available in variable diameters of 4.7 F and 5.0 F for accessing distal anatomy and delivering high profile devices ; Guide Extension Catheter wuth a tapered distal shaft for accessing distal and challenging coronary anatomy ; Guide Extension Catheter with a Resinous atraumatic tip; Guide Extension Catheter with a large entry port design for easy device insertion – Japan PMDA/CE Approved. |
| 71 | Tapered soft tip Micro Catheter , Tip entry 1.4 Fr distal 1.9 Fr&Proximal 2.6 having SHINKA Shaft length 135&150 cm . CE Approved |
| 72 | PTCA Balloon Catheters |
| 73 | PTCA Balloon (Compliant)Should be Monorail (Rapid Exchange)Available in all sizes & lengths. |
| 74 | PTCA Balloon (Semi Compliant)Should be Monorail (Rapid Exchange)Available in all sizes & lengths. |
| 75 | PTCA Balloon (Non Compliant)Should be Monorail (Rapid Exchange)Available in all sizes from 2-4 mm & in variable lengths.Should have a very High Rated Burst Pressure. |
| 76 | PTCA Balloon (Non Compliant)Should be Available in over the wire (OTW) Balloon.Available in all sizes from 2-4 mm & in variable lengths.Should have a very High Rated Burst Pressure. |
| 77 | Large PTCA Balloon> 4mm (Non Compliant)Should be Monorail (Rapid Exchange)Should have Variable Lengths & Sizes |
| 78 | Special PTCA Balloon Catheter of Less Than 2.0 mmShould be Monorail (Rapid Exchange)Should be Available in Variable Lengths & Sizes. |
| 79 | Special PTCA Balloon for Septal Ablation of HOCMShould be Monorail (Rapid Exchange)Available in all sizes & Lengths. |
| 80 | Special PTCA Balloon for Septal Ablation of HOCMShould be over the wire (OTW)Available in all sizes & Lengths. |
| 81 | Zero Fold PTCA BalloonShould be Monorail (Rapid Exchange)Available in all sizes & lengths. |
| 82 | Zero Fold PTCA BalloonShould be over the wire (OTW) BalloonAvailable in all sizes & lengths. |
| 83 | Low Pressure Atraumatic Microspores PTFE Balloon Catheter for Local Infusion of Drugs.Should be Monorail (Rapid Exchange)Catheter Length should be more than 130 cm & size 1.5 – 4.0 mm |
| 84 | Bevelled Balloon of Various sizes for entry through the stent strut into side branch |
| 85 | Non-Compliant rapid exchange PTCA Ballon , with enhanced push ability , trackability and kink resistance , RBP 22 ATM, Average Brust Pressure of 30 atm ; tip entry profile >0.016” Available in all sizes &lengths. |
| 86 | Specialised proximal optimisation balloon dilatation catheter with ultra –short balloon shoulder of 0.6 mm and and RBP of 22 atm with sizes ranging from a length of 6-15 mm and diameters ranging from 2.25-5mm. Hydrophilic external surface coating from tip to adjacent guidewire port and silicone coating inside guidewire lumen. |
| 87 | 0.75 mm CTO ballon with a tip entry profile of 0.015”and ultra – low crossing profile of 0.020” with a proprietary distal welding technology , 2.2F distal shaft , Rated Burst Pressure of 20 ATM and Average Burst Pressure of >28 ATM. Available an all sizes & lengths. |
| 88 | Non-compliant balloon with *trac+Premoulded Tip* for entry in tight and calcific lesions with lesion entry profile of 0.016” and * Calibre Twin Shaft Technology * for better pushability and trackabilbity , diameter available from 1.5 mm – 4.5 mm , length available 6 mm – 30 mm, NP 12 ATM, RBP – 22 ATM |
| 89 | Scoring Balloon with triple nylon microtomes with 120 degree angle between them.An entry profile of 0.0167 inch with 2.2 F proximal shaft and 2.7F distal shaft and an RBP of 24 atmosphere. |
| 90 | Single wire design , fixB-11ed 0.011 nitinol wire , coaxial rapid exchabge design , trifold ballon wrapping scoring balloon with a nominal of 6 atm and RBP of 14 atm and average Burst Pressure of 20 atm. Available in all sizes & Lengths with special Eel. Coating in guide wire lumen and Slider Hydro hydrophilic coating from tip to guide wire port for improved trackability. |
| 91 | Non – Compliant PTCA Balloons Catheters High pressure ono-compliant balloon with Innovative triple layer balloon technology with pressure resistance of 22 ATM. Must Have Elastomer outer layer , middle layer of Polyamide and inner most layer of Elastomer. Must Have nominal pressure of 12atm and RBP of 22atm . Shorter thin distal tip of 2.9mm with low entry profile of 0.43 mm. Must have hydrophilic mucus coating Must have 3.0 mm Short taper balloon shoulder& Must Have 0.8mm Shorter and 25umThinner radiopaque marker for lower crossing profile . Must Have 2.6 French stainless steel core wire structured shaft &stainless –steel stylet in Mid shaft . Must Have Hypotube without PTEE Coating . Must Have three pleats Re-wrappable |
| 92 | Semi Compliant PTCA Balloons Catheters CTO Balloon with Ultra-ultra Low Entry profile of 0.016”must have hydrophilic Mucus coating . Should have smallest diameter 1.00mm and 5mm length. Must have co-polymer nylon balloon , Must have 0.8 mm Shorter and 25um Thinner radiopaque marker for lower crossing profile . Must have Flexible Tip with short balloon bonding part of 0.4 mm. Nominal pressure of 06 ATM and RBP of 14 ATM Must have 2.4 to 2.7 French tapered stainless steel core wire structured shaft . Must Have three pleats Re-wrappable structure. |
| 93 | Semi compliant balloon with *Trac+Premoulded Tip * for entry in tight and calcific lesions with lesion entry profile of 0.016”and Calibre Twin Shaft technology * for better pushability and trackability , diameter available from 1.5 mm -4.5mm , length available 8mm-30mm , NP6 ATM,RBP-14ATM |
| 94 | Drug Eluting PTCA BalloonShould be available in all types & sizes. |
| 95 | Drug Eluting PTCA Balloon for below the Knee Peripheral Artery. |
| 96 | PTCA Cutting Balloon with FlextomesShould be Monorail (Rapid Exchange)Available in all sizes & lengths. |
| 97 | PTCA Cutting Balloon with Microsurgical Atherotomes (Blades)Available in all sizes & lengths. |
| 98 | Cutting Balloon for Renal & Peripheral Arteries.Should be Monorail (Rapid Exchange) Balloon.Available in all sizes & lengths. |
| 99 | Scoring Balloon Catheter for PTCA.Should be Monorail (Rapid Exchange).Available in all sizes & lengths. |
| 100 | Dual wire PTCA Balloon Dilatation Catheter.Should be Monorail (Rapid Exchange).Available in all sizes & lengths. |
| 101 | PTCA Bifurcation Balloon.Should be Monorail (Rapid Exchange).Available in all sizes & lengths. |
| 102 | Balloon Dilatation Catheter for Aorta & IVCShould be Monorail (Rapid Exchange) Balloon.Available in all sizes & lengths. |
| 103 | BIB (Balloon in Balloon) Type Balloon for Co-Arctation Dilatation.Should be Monorail (Rapid Exchange) Balloon.Available in all sizes & lengths. |
| 104 | Z MED type Balloon for Aortic Co-Arctation.Should be available in 5-20 cm Diameter in all size.Should be Monorail (Rapid Exchange) Balloon.Compatible with 0.014’’/0.035’’ & 0.038’’ wire. |
| 105 | Z MED type Balloon for Aortic Co-Arctation.Should be available in more than 20 cm Diameter in all size.Should be Monorail (Rapid Exchange) Balloon.Compatible with 0.014’’/0.035’’ & 0.038’’ wire. |
| 106 | Over the wire Balloon for peripheral Angioplasty.Should be available in all sizes & Diameters. |
| 107 | PTCA Balloon (Semi Compliant) monorail hypophilic coating & trifol techinology size 1.25 mm and above |
| 108 | PTCA Balloon (Non Complient) monorail with RBP 22 ATM & above |
| 109 | PTCA Balloon (Semi Complient) monorail 0.75 mm size for CTO |
| 110 | PTCA Balloon (Semi Complient) monorail 1 mm size for CTO |
| 111 | PTCA Balloon (Semi Complient) monorail double layer for Plan modification with RBP ≥ 35 ATM |
| 112 | Cutting Balloonfor Renal & Peripheral Arteries. Should be Monorail (Rapid Exchange).Available in all sizes & lengths. |
| 113 | Dual Layer/RBP 35 bars/strictly Non Complient(only10%Growths and for super high pressure PTCA manometer of 55 atm) Should be Monorail (Rapid Exchange) Available in all sizes & lengths. |
| 114 | CTO Semi –compalient balloon with low entry profile of0.016”with hydrophilic coating . should be available in diameter sizeas from 1.0mm-2.5 mm and length sizes 5mm- 20 mm. |
| 115 | High pressure ono-compaliant balloon for CTO with triple layer withRBP upto 22 atm above . should be available in diameter sizes from 2.0 mm -5.0 mm and length sizes 6 mm -25 mm. |
| 116 | Miscellaneous Items for PTCA04 FDA/CE/ DCGI |
| 117 | Export Asiration Catheter |
| 118 | Eliminate Catheter & Accessories |
| 119 | Thrombectomy Catheter with Manual Suction During PTCA |
| 120 | Thrombectomy Catheter with Distal Balloon Occlusion and Automated Suction During PTCA |
| 121 | Thrombectomy Catheter with Motorized cutting and Suction During PTCA |
| 122 | Distal Protection Device Compatible with 0.014 wire, Umbreally type Coronary Filter. |
| 123 | Embolic Protection Device Based on Filter Technology/ Mechanism |
| 124 | Embolic Protection Device with Distal Balloon Occlusion Technology |
| 125 | Embolic Protection Device with Proximal Balloon Occlusion Technology |
| 126 | Torque Device -Accepting 0.014’’ – 0.018’’ Guide Wire |
| 127 | PTCA Needle - Accepting 0.014’’ – 0.018’’ Guide Wire |
| 128 | Haemostatic ‘’Y’’ Connector (TUOHYBorst) For PTCAShould Accommodate Virtually All Interventional Devices. Luer Connector at the Guiding Catheter. Should have Bonded Extension Tube (Length 20 cm) & Push Pull type Hemostatic valve.Rotating Adapter at the guiding catheter end.Should have bleed back safety Mechanism.Stepwise control for open, semi open and closed Position. |
| 129 | Haemostatic ‘’Y’’ Connector (TUOHY Borst - Double) For Bifurcation PTCA. two Ports for insertion of Interventional Devices.Luer Connector at the Guiding Catheter.Rotating Adapter at the Guiding Catheter End. |
| 130 | PTCA Inflation Device - Efficient Locking System to Maintain High Pressure. Rapid Inflation & Deflation.Clear Barrel for easy visualization of De-Bubbling.Luminescent Analog Pressure Gauge (up to 30 Atm) and having Barrel Volume up to 20 ml.Ergomatric & User Friendly Hand Held Design. |
| 131 | Radial Compression band (TR Band Type) |
| 132 | Arterial Puncture Closure Devices – Collagen Plug Based |
| 133 | Femoral Compression Devices – Disc/Dome Based Compression |
| 134 | Femoral Compression Devices – Disc/Dome Based Compression |
| 135 | Domes of Femoral Compression Device |
| 136 | Dedicated Micro Catheter for side Branch Access |
| 137 | Micro Catheter (Coiled Stainless Steel Construction). Should be available in Variable Lengths & Curves.2.3 – 8 FS Iz E 0.010-0.022’’ Wire Compatible With radio Opaque marker at Tip |
| 138 | Micro Catheter (Braided Nitinol Construction)Should be available in Variable Lengths & Curves.2.3 – 8 FS Iz E 0.010-0.022’’ Wire Compatible With radio Opaque marker at Tip |
| 139 | Doppler Wire for PTCA |
| 140 | Pressure Wire for PTCA |
| 141 | IABP Catheter with AccessoriesShould be compatible with Existing Machine (Datascope-CS-100 Model) in Cath Lab, J. L. N. Medical College, Ajmer |
| 142 | Arterial Puncture Closure Devices-Suture based |
| 143 | Renal Denernation Device for RF ablation of renal` |
| 144 | Snare for cardiovascular purpose |
| 145 | Snare for Peripheral use |
| 146 | Push Pull Y connector: Effectively minimizes blood loss and provides a smooth channel for interventional device delivery . Easy Push-Pull mechanism allows single handed operation 9F Bore Size for usge with a veriety of device . DCGI Approved. |
| 147 | Push Click Y connector: PUSH click mechanism to control the haemostatic valve and minimize blood loss.Single handed operation. 9F Bore Size for passage ofa variety of devices with 180 Psi of pressure sustenance. DCGI Approved. |
| 148 | Screw type mechanism for passage of larger device 9F bore size with 300 Psi ofpressure sustenance. Screw type allows better control on haemostasis and device control.DCGI Approved. |
| 149 | MECHANICAL ASPIRATION DEVICE (ALL TYPES)-DCGI APPROVED Coronary Thrombus Extraction catheter with full length braided shaft with 300 mm Hydrophilic coating with embedded wire for enhanced deliverability and kink resistance 20cm rapid exchange length-size 6F |
| 150 | Balloon Inflation Device :- Pressure capacity 30 Atmospiric pressure Polycarbonate body 20 ml capacity |
| 151 | Gun Type inflation Device :-Pressure capacity 30 Atmospiric pressure polycarbonate body 20 ml capacity |
| 152 | Gun Type inflation Device :-Pressure capacity 50 Atmospiric pressure polycarbonate body 20 ml capacity |
| 153 | Mechanical Thrombectomy device for acute, subacute &chronic PE without need of lytics. Should be 16fr,20fr,24fr with Sheath – US FDA Approved |
| 154 | Mechanical Thrombectomy device for DVT treatment. 30 cm – nitinol collection mesh for acute,subacute & subacute &chronic DVTwithout need of lytics.1 cm – Scoring element with 12fr/13fr/16fr Proprietory funnel sheath supportive for CT device – US FDA Approved. |
| 155 | Sterile barrier pad for protection during fluoroscopy for coronary interventional procedures with light weight Antimony – bismuth layer disposable in various sizes.DCGI Approved. |
| 156 | FDA/CE/ DCGI |
| 157 | Stainless Steel Coated Stents (All Type) |
| 158 | Cobalt Chromium Coated Stents (All Type) |
| 159 | Carbon Coated Stents with 2 Platium Markers on stent Also |
| 160 | Covered stents Should be Monorail (Rapid Exchange ) Available in all sizes & lengths. Covered graft stent for dissected arteries |
| 161 | PBMV& ValvoplastyFDA/CE/ DCGI |
| 162 | PBMV Balloon (All Types and Sizes) With Accessories |
| 163 | PBMV Balloon (All Types and Sizes) Without Accessories |
| 164 | Accessories only for the above PBMV Balloons |
| 165 | PBMV Balloon with Side safety/ Micro holesWith Accessories |
| 166 | PBMV Balloon with Side safety/ Micro holesWithout Accessories |
| 167 | Valvoplasty Balloon Catheters Varying length and diameters Approved for paediatric/ Adult use |
| 168 | Wire 0. 018”regular length, regular shaft stiffness Floppy TIp Straight / J Shaped tip 140-300 cm long |
| 169 | Wire 0.018\"\" regular length, extra -stiff shaft Floppy TIp Straight / J Shaped tip 140-300 cm long |
| 170 | Valvoplasty Balloon Catheters (Sizes- 10- 20 mm) Varying length and diameters Approved for paediatric/ Adult use Nominal pressure < 4 ATM |
| 171 | Valvoplasty Balloon Catheters (Sizes- 10- 20 mm) Varying length and diameters Approved for paediatric/ Adult use Nominal pressure < 8 ATM |
| 172 | Valvoplasty Balloon CathetersTYSHEK Type (All sizes) Varying length and diameters Approved for paediatric/ Adult use Nominal pressure < 4 ATM |
| 173 | PTMC Balloon with hole in Balloon |
| 174 | PTMC Balloon (with hole in Balloon) With all Accessories |
| 175 | TemporaryPacemaker Implantation FDA/CE/ DCGI |
| 176 | Flow Directed Temporary Pacing Lead With Balloon (5F, 6F)• 8 mm Balloon,Length 110 cm |
| 177 | Ordinary Temporary Pacing Lead (5F, 6F, 7F)• 110 cm Long , 2 mm Bipolar Electrodes |
| 178 | Ordinary Temporary Pacing Lead (5F, 6F)• 110 cm Long, Electrode Spacing- 15- 25 mm |
| 179 | Temporary Bipolar Pacing lead 6F (Platinum) |
| 180 | IVUS / FFR & Rotablation SystemFDA/CE/ DCGI |
| 181 | Rota link Burr Compatible with existingRota Machine (Boston scientific)in Cath Lab at J. L. N. Med. College , Ajmer Should be available in all sizes |
| 182 | Rota link Advancer Compatible with existingRota Machine (Boston scientific)in Cath Lab at J. L. N. Med. College , Ajmer |
| 183 | Rota link Plus (Advancer & Burr) Compatible with existingRota Machine (Boston scientific)in Cath Lab at J. L. N. Med. College , Ajmer |
| 184 | Rota wire Compatible with existingRota Machine(Boston scientific) in Cath Lab at J. L. N. Med. College , Ajmer |
| 185 | Rotational Atherectomy Guide Wires |
| 186 | Rotaglide Lubricant |
| 187 | IVUS Catheter Should be Compatible with existingIVUS machine (Boston scientific) in Cath Lab at J. L. N. Med. College , Ajmer |
| 188 | FFR wire with accessories• Should be Compatible with existingFFR machine (St. Jude System) in cath lab at J. L. N. Med. College , Ajmer |
| 189 | OCT wire with Accessories Compatible with ILUMEN OPTIS (St. Jude\"s System) |
| 190 | Intracardiac Echo Catheter |
| 191 | Angiojet Thrombectomy Aspiration Catheter |
