|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) manual means over areas (exceeding 30 em in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. |
| 2 | All kinds of soil |
| 3 | Dismantling old plaster (mud/cement) or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 4 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 5 | For thickness of tiles 10 mm to 25 mm |
| 6 | Dismantling G.I. pipes (surface/concealed work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : |
| 7 | 15 mm to 40 mm nominal bore |
| 8 | Dismantling W.C./Indian Pan, wash basin, urinal, etc of all sizes with accessories/fixtures including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. |
| 9 | Dismantling doors, windows, ventilators and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 10 | Of area 3 sq. metres and/or above |
| 11 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 12 | Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) |
| 13 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 14 | In cement mortar |
| 15 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 16 | Removing dry or oil bound distemper, emulsion paint water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 17 | Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) : including scaffolding, curing, etc; complete |
| 18 | With Modular bricks |
| 19 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. including scaffolding, curing, etc; complete. |
| 20 | Cement mortar 1:4 (1 cement :4 coarse sand) |
| 21 | Plastering on internal & external surface of 12mm thick with cement mortar specified below, finished smooth, including scaffolding, curing, etc; complete for INTERNAL & EXTERNAL SURFACES of stone masonry/brick masonry walls sills, jambs, etc; complete all as per specifications UPTO FLOOR LEVEL, mix specified is for cement: fine sand.NOTE: CM 1:3 OR 1:4 is generally applicable for ceilings and RCC surfaces unless otherwise specified. |
| 22 | 1:4 (1 cement: 4 fine sand) Wall surfaces |
| 23 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under/above, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete,including disposal of rubbish to the dumping ground, all complete as perdirection of Engineer-in-Charge. |
| 24 | With cement mortar 1:4 (1 cement : 4 fine sand) |
| 25 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand(zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 26 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. |
| 27 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 28 | Centering and shuttering including strutting, propping etc. and removal of form for |
| 29 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 30 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 31 | 1:3:6 (1 Cement : 3 coarse sand (zone-Ill} derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 32 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.Basic rate: 65/sft. |
| 33 | Providing and laying rectified Glazed Ceramic floor tiles (Anti-skid) of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with grouting and matching pigments etc., complete. Basic rate: 65/sft. |
| 34 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 35 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Brand: Birla |
| 36 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. |
| 37 | With water thinnable cement primer on wall surface having VOC content less than 50 gramsilitre Brand: Asian paints |
| 38 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Brand: Premium emulsion of Asian paints |
| 39 | Two coats |
| 40 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Brand: Asian paints (Apcolite) |
| 41 | one coat on old work |
| 42 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming & 2 coats of color of approved brand all complete. |
| 43 | Providing and fixing precoated galvanised iron profile sheets (Galvalume - profile sheet)(size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per |S: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15- 18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal! vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape, scaffolding, etc wherever required. |
| 44 | Providing and fixing WPC/FRP/GRP Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with same material from all sides. M.S. stay shall be provided at the bottom to steady the frame.Note: Rate is including fixtures for fixing the frames, i.e SS screws, etc, |
| 45 | 30 mm thick WPC/FRP/GRP panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, etc conforming to IS specification.Note: Rate is inclusive of hinges, screws, locking arrangement, tower bolt on both inner & outer sides, etc. |
| 46 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. Brand: Godrej |
| 47 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. Brand: Supreme pipes |
| 48 | 20 mm nominal dia Pipes (Schedule 80 - SDR 11) |
| 49 | 25 mm nominal dia Pipes (Schedule 80 - SDR 11) |
| 50 | Providing, laying and jointing unplasticized PVC pipes (SWR) and specials of working pressure as mensioned below conforming to IS:4985 including cost of necessary jointing materials, wall clips & labour for excavation of trenches, testing, refilling etc., complete all as per specifications. Brand: Supreme pipesNote: Rate is including removal of old CI/GI pipes which is concealed or surface. (SWR Type B pipes) |
| 51 | 10Kg/Sqcm and 32mm OD |
| 52 | 6Kg/Sqcm and 75mm OD |
| 53 | 6Kg/Sqcm and 110mm OD |
| 54 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Basic rate: 10,000/- (wall / floor mounted) Make: Jaquar. |
| 55 | W.C. pan with ISI marked white solid plastic seat and lid |
| 56 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S$ trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:Basic rate: 5,000/- |
| 57 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 58 | Providing and fixing PV.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 59 | 10 litre capacity - White |
| 60 | Providing and fixing white vitreous china wash basin including making all connections andincluding the cost of all fittings such as waste coupling, waste pipe/ bottle trap etcBasic rate: 5,000/- |
| 61 | Flat back wall mount wash basin of size 630x450 mm each. Make: Jaquar |
| 62 | Supplying and fixing in CP Pillar cock (hot & cold water provision) with wall flange including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. Make:- Jaquar & Basic rate: 8,500/- |
| 63 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Note: mirror size may vary as decided by competent authority. Base Rate: 3,500/- |
| 64 | Supplying and fixing in CP 2 in 1 bib cock with wall flange including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. Make: Jaquar, , Basic price: 5,000/- |
| 65 | Supplying and fixing in CP Health Faucet with 1.2m connection pipe & wall hanger, including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. Make:- Jaquar & , Basic price: 4,000/- |
| 66 | Providing and fixing of PVC Nahani trap (4\") single or multy way, including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. |
| 67 | Providing and fixing of CP shower rose of 100mm dia with arm of 250 mm as per IS standard of approved brand and design as approved by Engineer-In-chage. Make: Jaquar, Basic price: 5,000/- |
| 68 | Providing and fixing of 3 in 1 wall mixer with flange as per IS standard of approved brand and design as approved by Engineer-In-chage. Make: Jaquar, Basic price: 12,500/- |
| 69 | Providing and fixing C.P. brass angle valve with wall flange for basin mixer, geyser points, etc of approved quality conforming to IS:8931Make: Jaquar |
| 70 | 15mm nominal bore |
| 71 | Providing and fixing of CP collection hose to flush tank, wash basin, geyser & sink cock as per IS standard of approved brand and design as approved by Engineer-In-chage. Make: Jaquar |
| 72 | Providing and fixing P.V.C. waste pipe for sink including P.V.C. waste fittings complete. Make: Jaquar |
| 73 | Flexible pipe- 32 mm dia / 40 mm dia |
| 74 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
| 75 | 15 mm nominal bore |
| 76 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 77 | 25 mm nominal bore |
| 78 | Providing and fixing CP towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. Basic rate: 3,500/- |
| 79 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm. |
| 80 | Providing and fixing CP towel ring of any shape concealed fittings arrangement of approved quality and colour, etc. Basic rate: 2,500/- |
| 81 | Providing and fixing CP double hanger with CP brass screws with concealed fittings arrangement of approved quality and colour. |
| 82 | Supplying and fixing in 100 mm dia. SS grating with or without hole as per direction of Engineer in Charge. Including making the surface goodetc. |
| 83 | Providing and fixing S S soap tray / holders with screws (two of soap holders), etc of approved quality and colour. Make: Jaquar & Basic rate: 2,000/- |
| 84 | Constructing brick masonry chamber for underground inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) FRP cover with frame (Medium duty) 610x610 mm internal dimensions, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: |
| 85 | Inside dimensions 610x610 mm and 60 cm deep for single /multiple pipe line :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5Note: Rate shall be inclusive of demolition of existing chamber, excavation, refilling, foot rests (if required) and 12mm thick cement plaster at the external surface. |
| 86 | Providing and fixing square-mouth PVC/S.W. gully trap complete with grating, brick masonry chamber with water tight FRP cover with frame (Medium duty) of 300 x300 mm size (inside) as per standard design: Note: Rate shall be inclusive of demolition of existing chamber, excavation, refilling and 12mm thick cement plaster at the external surface. |
| 87 | 100x100 mm size P typeWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 88 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. |
