Bids Are Invited For Centre Drill Hss, Is: 6708, Type-A Pilot Dia 4Xbody Dia 10 , Hss M42 J/S Tialn Coated Drill Is: 5101 Dia 1.27Mm, Fl 16Mm, Oal 38Mm, Sh Dia 1.27Mm , Hss M42 J/S -Tialn Coated Drill As Per Is: 5101 Dia 1.28Mm, Fl16mm, Oal38mm, Sh. Dia 1.28Mm , Hss M42 J/S P/S Tialn Coated Twist Drill Dia 1.44Mmxfl18mmx Oal 40Mmxsh. 1.44Mm , Hss M42 J/S P/S Tialn Coated Twist Drill Type-Qc21gm Dia1.60Mm, Fl20mm, Oal43mm, Sh. Dia1.60Mm , Hss M42 J/S P/S Tialn Coated Twist Drill Type-Qc21gm Dia1.8Mm, Fl22mm, Oal46mm, Sh. Dia1.8Mm , Hss M42 J/S Tialn Coated Twist Drill Is: 5101 Dia1.85Mm, Fl22mm, Oal46mm , Hss M42 J/S P/S Tialn Coated Twist Drill Gr: M42 Dia1.95Mm, Fl24mm, Oal49mm, Sh. Dia1.90Mm , Hss M42 J/S P/S Tialn Coated Twist Drill Gr: M42 Dia2.2Mm, Fl27mm, Oal53mm, Sh. Dia2.2Mm , Hss M42 J/S Tialn Coated Twist Drill Is: 5101 Dia2.5Mm, Fl30mm, Oal 53/57Mm, Shdia2.5Mm , Hss M42 J/S P/S Tialn Coated Twist Drill Dia4mm, Fl43mm, Oal75mm, Sh. Dia4mm , Hss M42 J/S P/S/Tialn Coated Twist Drill. Is: 5101 Dia5mm, Fl52mm, Oal86mm, Sh. Dia5mm , Hss M42 J/S Tialan Coated Drill Is: 5101 Dia 6.00 X 52Fl X 86 Oal, Shank Dia 6.0Mm , H S S Taper Shank Twist Drill Dia 22.00Mm , Solid Carbide Jobber Series Drill With Tialn Coating Gr: Micro Grain, Is: 5101 Dia: 2.90Mm, Fl: 33Mm, Oal: 6 , Solid Carbide P/S Jobber Series Twist Drill Gr: Micro Grain With Tialncoatingis: 5101 Dia3.35Mm (Hpd3 , Solid Carbide P/S Jobber Series Twist Drill With Tialn Coating Gr: Micro Fine, Is: 5101 Dia4.3Mm, Fl43mm , Solid Carbide P/S J0bber Series Twist Drill With Tialn Coating Gr: Micro Grain, Is: 5101 Dia4.70Mm, Fl47 , Solid Carbide P/S Stub Series Twist Drillwith Tialn Coating Gr: Micro Grain, Is: 5100 Dia1.3Mm, Fl10mm, O , S/C M/F S/S Drill Dia 2.05Xfl12xoal38x135â° With Tialn Coating As Per Is: 5100 , Solid Carbide P/S Stub Series Twist Drill With Tialn/Ticn Co Gr: Micro Fine, Is: 5100 Dia5.7Mm, Fl28mm, O , Bench / Pedestal Grinder (V2) Total Quantity : 2155
