Tender For Certain Misc E/M Works In Aor Of Age E/M Nrc Under Ge Nasik Road.; 1 Supply and fixing in replacement of 10 Sqmm, 1100 volts grade, heavy duty, stranded conductor, 2 core cable PVC insulated aluminium conductor served with inner sheathing of PVC sheathed in service connections complete all as specified and directed. 2 Supply and fixing in replacement of AlphaRex3 digital time switches D-22, multifunctional digital time switches all as specified and directed by Engineer-in-Charge. 3 Supply and fixing in replacement of power contactors ML-3, 3 pole rating not less than 40 Amp, 230 coil complete as specified and directed by Engineer-in-Charge. 4 Supply and fixing in replacement of Energy efficient LED Street/ Roadway with PDC housing luminaire, high PF, 50W, energy saving and environmental friendly long life versatile pressure die cast aluminium housing, clear toughned glass, IP 66 protection, 240Volts, 120 lumens/watt, colour temp. 6500K, of Cat Part No LHETAVU7PA7J050 of make Havells or equivalent complete all as specified and directed. 5 Supply and fixing in replacement ofEnergy efficient LED Street/ Roadway with PDC housing luminaire, high PF, 60W, energy saving and environmental friendly long life versatile pressure die cast aluminium housing, clear toughned glass, IP 66 protection, 4KV inbuilt surge protection, 240 Volts, 120 lumens/watt, colour temp. 6500K, of Cat Part No ENXT P72L WH PO PC SD MT of make Bajaj or equivalent complete all as specified and directed. 6 Supply and fixing in replacement of Solar traffic blinker of size 300mm diameter, polycarbonate in red/green/amber colour LEDs (as per site requirement), inbuilt LIFEPO4 battery pack and and extent PV panel of CAT ref No HLSTB0901031121-300MM-AMB-WA of Halonix or equivalent and ready to install over on existing pole, IP-65 protection complete all as specified and directed. 7 Supply and fixing in replacement of Energy efficient LED Flood light Luminaire, high PF, 100W, energy saving and environmental friendly long life versatile pressure die cast housing IP 66 protection, 240Volts, bracket of adequate size of Make: Bajaj Cat Part No TFS-504-100-57-NL-SL-GL- equivalent of C&S/ Philips/ Crompton/ Havells complete including testing & commissioning. 8 Supply and fixing in replacement ofDecorative LED post top lantern, high PF, 40 Watt, energy saving and environmental friendly long life versatile pressure die cast aluminium housing, 360 degree indirect light, optimum light output, IP 65 protection, glare-free and better uniformty, 240 Volts of Cat ref No BGCTN 40W LED WW of Bajaj, complete all as specified and directed. 9 Supply and fixing in replacement ofbrackets made out of 40mm bore GI pipe, medium grede, 1.5M long, bend to shape and including suitable MS clamps made out of 40 x 6mm flat iron, necessary bolts, nuts, washers etc complete and painting the bracket and clamps with 2 coats of synthetic enamel paint over a coat of red oxide Zinc chromate primer allasspecified and directed. 10 Supply and fixing in replacement ofPVCweather proof, hinged door, junction box of size 250mm x 200mm x 100mm with 240Volts, Neutral link and 1No MCB SP of 6 Amps, necessary fixing arrangement such as clamps, nut, bolts, etc. complete allasspecified and directed.Make : Sintex, Cat No. GSJB 2014 or equivalent approved makes. 11 Supply and fixing in replacement offlood light maximum 200W LED, minimum system lumen output of 22000 lm. The luminnare should have colour temperature of 5700/ 6500K and THD<10% CRI> 70. The luminaire shall meet IP66 ingress protection and impact resistance of IK07 and luminaire housing shouldmade of pressure die-cast aluminium and itegrated PC Lens. The luminaire should have the features of high voltage 10 kV external surge protection long life, integrated potted LED driver offers comfortable softlight, high durability, driver safety requirement standards as per IS 15885-2 -13. Cat part No JETAIRISFLS 200WLED757PSYMLTG of Havells or Philips/ Bajaj/ Wipro. 12 Supply and fixing in replacement ofLED bush light of capacity 12 watt, 240 volts with die cast aluminium housing with toughned glass, IP-66 complete all as specified and directed. 13 Supply and fixing in replacement ofLED aviation light fitting with comprising of aluminium housing with polycarbonate enclosure, IP 66 protection complete all as specified and directed. Make - Bajaj CP No BGAV 302 LED or equivalent of Surya/ Havells/ Philips. 14 Supply and fixing in replacement ofSolar LED security light of capacity 50 watt, integrated all in one type inbuilt solar charge controller, solar PV module, LiFe PO4 battery and mounting clamps as a ready installation having following specifications:-- SEC/MNRE tested approved PV panel and battery.- Operating voltage : 12.8V DC.- Battery type: 12.8V 30 Ah Lithium Ferro Phosphate (Li-FePO4) BIS certified.- System wattage 12.8V, 50 Watt LED luminaire integrated with street light made of aluminium extrusion and CRCA powder coated sheet with inbuilt charge controller.- Lumen efficacy : Not less than 120 lm/watt.- CCT : 5400K - 6000K.- CRI : Polycarbonate lenses LED.- PV module : Mono-crystalline 100Wp PV module under STC equivalent MNRE/SEC tested.- Mounting bracket : included.- Dimming level : PIR motion sensor based dimming - 100% once motion detected and rest time operate at 30 % load.- PIR motion sensor : Inbuilt.- Duty cycle : After dusk ON 12 hrs/day as per dimming level.- Automony : 1 day as per duty cycle per day at battery full charge STC condition.- Protection : Overcharge, Deep discharge, reverse polarity, overload. 15 Supply and fixing in replacement of Mild Steel 3 Meter Decorative Garden Light Poles double bracket for gardens including borage NX series decorative luminaire 60 watt, 3000K with die cast aluminium with UV stabilized clear PC diffuser with decorative crown complete with excavation work and PCC foundation work 1:2:4 of adequate size for installed of mast pole complete all as specified and directed by Engr in Charge. 16 Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for taking out pipe line etc for repairs / laying cables etc and getting out in soft / loose soil complete all as specified and as directed by the Engineer - in - Charge. 17 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed by the Engineer - in - Charge. 18 Removal of excavated material [soil] to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed by the Engineer - in - Charge. 19 Supply, fixing and layingin replacement of in trenches or fixing or passing through pipe, 1100 Volts grade heavy duty LT UG cable, 2 core 6 Sqmm, with XLPE insulated stranded Aluminium conductor served with an inner sheathing of PVC tape, Armoured with galvanised steel wire and overall sheathedincluding cablegland, lugs, jointingmaterialetc,jointing, connecting,testingandcommissioning allasspecified and directed. 20 All as per Ser item No 19 above but 2 Core 10 Sqmm. 21 All as per Ser item No 19 above but 4 Core 16 Sqmm. 22 All as per Ser item No 19 above but 4 Core 25 Sqmm. 23 M&L for Double Walled Corrugated DWC HDPE Pipe of outer dia 50mm and innter dia 38mmincluding 90 degree bends with coupler and rubber ringlaid in trenches of size 50 mm suitable for cable protection of size 2 core 10 sqmm to 3.5 core 50 sqmmcablecomplete all as specified and directed. 24 Supply, fixing, install and testing in replacement of 7 mtr height, top outer dia 105 mm, bottom outer dia 215 mm, translucent conical pole glass fibre reinforced with polymer matrix combination of fibre glass and resin making it a strong having a highest technology has filament winding by using CNC method, glass content of 65 to 70 %, specific garvity 1.42g/CC, dieleectric strength 40 KV/mm, tensile strength 225Mpa, water absorption 0.3% flexural strength 269mpa, Izod impact strength of 80 k/Jm², barcol hardness of 45 BHU, Tensile module of 9000Mpa, Surface resistivity of 1.6x1016Ω, tensile modules of elasticity 22918 N/mm² complete including shockproof, maintenance free, Non conductive, light in weight, wind speed sustainability is 150 KM/H, base plate is made in GFRP material with customized LOGO and LED strips (LED strip colour specified by Engineer in Charge) complet all as specified and directed.Note : Rate for LED strips, RCC foundation as per drawing provided by OEM, Excavation in any type of strata returning filling, 7mtr pole, decorative arm 1 mtr long, junction box, foundation bolts and nuts included in this item rate. 25 Demolition of PCC of any description above/below ground level exceeding 15cm complete all as specified and directed by Engr-in-Charge. 26 Suuply and fixing in replacement of machine pressed precast interlocking paver block any size and shape of 60 mm thickness M-40 grade confirming to IS: 15658-2006 with grey cement and pigment and vibrated with mechanical vibrator, with 30mm thick crushed sand for cushioning all as directed.Note :- (i) Rate include for dismantling of existing interlocking paver block including PCC work. 27 M&LforPCC 1:2:4 type C1 using 20mmgradedaggregateon sides/ edges ofpaver block includingnecessaryform workandfair finishingofexposedsurface of concrete allasspecified and directed. 28 M&L for dismantling of existing kerb stone and Supply and Fixing of LED Kerb stone of size 500 MM x 150 MM x 200 MM made of PE Engineered plastic with LED PCB strip mounted with 2835 SMD and 100 R resistor soldered on PCB with male and female connectors of IP 68 rating for interconnection between two Kerb stones and one power supply of 240V AC, 36V-DC of meanwell make. The Kerb stone should be integrated with M10 inserts in the kerbs leg supports for easily fixing in the ground using M10 anchor fasteners duly drilling in the ground and fixing with required cement mixture /epoxy as per direction of Engineer in charge. Warranty of minium 1 year, having adequate number of connectors and power supply kit for necessary connection including wire and other material as required at site as per manufacturers instructions including necessary excavation and cement concrete. The rate includes of required components for connection from the main electric supply. The product should be ISO 9001:2015 certificate for quality checks. Seller should have manufacturers authoriasation. Load bearing capacity should be miniumun 850/Kg Sq inch. Note : Items required for connections to main electric supply from near by electric sources to be included in the quoted rates complete all as specified and directed. Make : Shriyas Electricals and Power Solutions or Signkraft or as approved by GE 29 Supply, fixing and install 7 mtr height mild steel octagonal pole top 70 mm, bottom 130 mm, surface finished: hot dip galvanised, 3 mm thikness with base plate 200x200x12 mm and GI 64 micron, M19x600 EN 8 grade foundaction bolt and 1 mtr cantilever arm bracket sword type for light fittings complete including foundation drawing provided by OEM for foundation of pole including MCB 2.5 Amp SP, 230 volts, with busbar.Note : Rate for RCC foundation as per drawing, Excavation in ant type of strata returning filling, 7mtr pole, bracket, foundation anchor bolts and nuts included in this item rate. 30 NOTE : - AMOUNT OF SCHEDULE OF CREDIT RS. 131780.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.
