Tender For Material And Labour For Construction Of 04 X Ug Amn Bkrs In Ferozepur; (a) Steel Sections for Structural Use IS-4923-1997 SAIL/TATA/ Jindal/ RINL (b) MS items/ accessories Conform to relevant IS SAIL/ TATA/ Jindal/ RINL (c) Galvanized Steel Sheets (Plain & Corrugated) IS-277 - 2003 SAIL/ TATA/ Bhushan/ RINL /Jindal/ / Everest/ Pre-star (d) Pre-painted Galvanized Steel Sheets and Coils IS-14246 - 2013 SAIL/TATA/ Bhushan/ RINL /Jindal/ Everest/ Pre-star (e) OBD, Paint Synthetic enamel, Paint Synthetic Emulsifier, Red Oxide, Primer IS-2074 - 1992, IS:102-1962 Asian/ Berger/ Shalimar/ Nerolac (f) Nuts & Bolts for Steel Structures, J Bolts, Washers IS-6639-1972, IS-730- 1978, IS-2016- 1967 ISI Marked (g) Steel Door Frames IS-4351 - 2003 ISI Marked (k) General Constr in Steel Code of Practice IS-800 - 2007 - (l) Use of Steel Tubes in General Building Construction IS-806 - 1968 - (m) Steel Beams, Column, Channel and Angle Sections IS-808 - 1989 - (n) Fasteners and Fittings Conform to relevant IS - 1 Excavating over areas, n exc 1.5 m deep and getting out soft /loose soil all as specified. Cum 63.00 2 Excavating over areas, exc 1.5 m deep and n exc 3.0 m deep and getting out soft /loose soil all as specified. Cum 63.00 3 Excavating in post holes (or similar holes) each nexc 0.50cum, gettingout in soft soil, returning filling in and ramming or broken rubble mixed with earth around in layers not exceeding 25cm watering and removing surplus soil to a distance n exc 50m and making good surplus complete all as specified. Nos 26.00 4 Material and labour for Hardcore broken stone or boulders of guage n exc 63mm, deposited spread and levelled in layers n exc 15cm thick, watered and rammed to true surface complete all as specified. Cum 3.51 5 Material and Labour for Cement concrete 300mm & 200mm thick in foundation Nominal mix type B1, 1:2:4 using 20 mm graded aggregate complete all as specified. Cum 7.16 6 Material and Labour for precast Cement concrete block masonry of size 250mmx250mmx150mm thick solid block type B1, 1:2:4 using 20 mm graded aggregate in cement mortar including formwork complete all as specified. Cum 0.075 7 Returning filling in, including spreading, levelling complete all as specified Cum 22.36 8 Removing excavated material n exc 50m and depositing where directed at a level nexc 1.50m above the starting point complete all as specified. Cum 103.64 1 Supply and fixing for rolled sections Fe-410-w(Gde-E-250) quality -B as in framing for cladding , glazing and the like fixed with angle cleats and connecting plates including welding etc complete all as specified Kg 1154.28 2 Supply and fixing for Stairs Fe-410-w(Gde-E-250) quality -B framed including stringers treades, landing, balusters, handrails etc; including cleats brackets etc complete all as specified. Kg 167.68 3 Supply and fixing for Joist, channel, angle or tee sections Fe-410-w(Gde-E-250) quality -B, fixed independently without connecting plates etc (cut to ordinary length),size ISMB150, 5400mm & 3600mm long complete all as specified. Kg 1404.00 4 Supply and fixing for 2.50mm thk Plates Fe-410- W(Gde-E-250) quality -B, (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified. Kg 986.35 5 Supply and fixing for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified. Sqm 79.92 6 Supply and fixing for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified. Sqm 4.86 7 Supply and fixing for framed work Fe-410-w(Gde-E-250) quality -B in doors or gates of angle or other sections with gusset plates, rail braces,etc, complete drilled for fixing of steel sheeting or other covering doors etc, to be prepared for hanging or sliding with and hinges or steel hanging door fittings and hanging also fastening and fixing complete all as specified. Kg 74.31 8 Supply and fixing for 125mm Butt hinges heavy weight, cold rolled mild steel complete all as specified Each 6 1 Material and labour for 2.00mm thick Linoleum (wood PVC Spong flooring), plain coloured, laid in floors including stretching, cutting and fitting with an approved adhesive complete all as specified. Sqm 14.40 2 Material and labour for 19mm thick marine grade plywood with BWR type adhesive, fixed with screws to timber frame work complete all as specified. Sqm 14.40 3 4mm ACP Sheet and frame work SHS 38x38x2.60mm for wall with 6mm thk plywood. Maximum spacing between studs not exceeding 600m c/c. All MS members shall be coated with anti-rust red oxide primer and finished with two coats of enamel paint. Panels shall be free from dents, scratches, and color mismatches. And ceiling should be painted with white colour paint. Sqm 43.20 .... more in document
