|
| 1 | Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete incement mortar 1:6 (1 cement : 6 coarse sand Above plinth level upto floor V level |
| 2 | 12 mm cement plaster of mix 1:4 (1 cement: 4 coarse sand including of all work complete |
| 3 | Earthwork in cutting or in embankment in ordinary soil withCartage of earth from3 Km as per si no 253(a) , 261© |
| 4 | concrete work in 1:6:12 Cement, c/ sand, and40 mm brick ballast including supply of all materials, labour , T & P etc. As per S.I.No 273 |
| 5 | P.C.C work in 1:1.5:3 Cement, c/ sand, and20 mm stone grit including supply of all materials, labour , T & P etc. As per S.I.No 279(b) |
| 6 | Providing and applying plaster of paris putty of 2 mm thickness overplastered surface to prepare the surface even and smooth complete |
| 7 | Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 8 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete Hot finished welded type tubes |
| 9 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless |
| 10 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces |
| 11 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm |
| 12 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). |
| 13 | Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution |
| 14 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlleddevice (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 15 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required17.2.1 W.C. pan with ISI marked white solid plastic seat and lid |
| 16 | Supply and fixing of bakelite Door i/c all hardware, screw, hinge, labour etc |
| 17 | Supply and fixing of Stainless Steel (Grade 304) handle of hollow pipe of size 0.45 m including all material labour with finish work |
| 18 | Supply and fixing of galvanised mosquito proof heavy quality SS 304 wire mesh over window & i/c all ereq for proper completion of wire as per SI No. 458 (Item no. 9.30) |
| 19 | Supply and Laying of 80 mm thick precast cement concreteI- shaped interlockingpaver blocks with top layer of minimum 8 mm thickness having plan dimension 200x(160+120)mm O.P. cement, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro-compression mechanism. The compressive strength of concrete paver block shall not be less than 30MPA(M-30) and weight 5.0 Kg per no . confirming to IS:15658-2006 including all and i/c 4cm sand layer |
| 20 | Repairing of existing gates in the toilet(s) i/c all labour, material etc |
| 21 | Add 18% GST |
