|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil as per DSR-2023 S.I No. 2.8.1 |
| 2 | Sand filling in plinth including supply if necessary quantity of sand from a distance not exceeding 8 km from the site of work and including watering dressing etc. labour and T&P etc required for proper completion |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:6:12 (1 Cement : 6 Fine sand (zone-lll) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) As per DSR-2023 S.I No. 4.1.8 |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) as per DSR-2023 S.I No. 6.1.2 |
| 5 | Cement Concrete with 20mm gauge approved stone ballast, coarse sand,and cement in the proportion 4:2:1 including supply of all material, labour, tools and Plants etc. requared for proper complition of the work SINo 279 (a) |
| 6 | E/w in cutting or filling embankment with ordinary soil in 20 cm. layers including ramming and dressing of surface to requried levels and slopes and also including 1.5 mt. lift and lead 30mt.cartage upto0.00Km. As Per SI No.253a |
| 7 | R.C.C. Work with cement approved coarse sand and 2 cm. gauge approve stone grit in proportions of 1:2:4 in Lintal excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary, centering & shuttering etc. and supply of all material, labour, tools & plants etc. required for proper completion of the work including cost of binding wire. The rate excludesmaking of drip course which shall be paid extra.SINo 283 |
| 8 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in super structure above plinth level upto floor V level in all shapes and sizes in cement mortar 1:6 ( 1 cement : 6 coarse sand ) as per DSR-2023 S.I No. 6.4.2 |
| 9 | R.C.C. Work with cement approved coarse sand and 2 cm. gauge approve stone grit in proportions of 1:2:4 in lintels of door & windows excluding supply excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B |
| 10 | R.C.C. Work with cement approved coarse sand and 2 cm. gauge approve stone grit in proportions of 1:2:4 excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary, centering & shuttering etc. and supply of all material, labour, tools & plants etc. required for proper completion of the work including cost of binding wire. The rate excludesmaking of drip course which shall be paid extra.SINo 288+285 |
| 11 | MS (Tor steel or plain)in plain work such as RCC or RB work including binding for proper shape and including supply of steel & its wastage bend, hooks and authorized overlapping shall be measured and including cost for binding wire.SINo. 504 |
| 12 | MS or Iron in Plain work in heavy size such as chokhat Trusses, Built up Gates, Door Frame, Grill including drilling holes, riveting, binding for proper shape and including supply of steel & its wastage, bend, hooks, steel bolt, Nuts etc and their fixing and including supply of all material, labour, tools and plants etc required for proper completion of the work. S.I.No. 503 |
| 13 | 12mm thick plaster with cement andcoarse sand 2.20 F.M. in 1:4 cement mortar over brick work minimum thickness not to be less than 1 cm. including supply of all material, labour, tools & plants etc required for proper completion of the work. SINo584 a |
| 14 | 12mm thick plaster with cement andcoarse sand 2.20 F.M. in 1:4 cement mortar over brick work minimum thickness not to be less than 1 cm. including supply of all material, labour, tools & plants etc required for proper completion of the work. SINo for rough side |
| 15 | Three coat of Paiting or varnishing work in small area or new wood / iron wok with one coat (upto one square metre of ready mixed ) priming paint and one coat of approved superior quality ready mixed paint or varnish including supply of all material, labour, tools and plants etc required for proper completion of the work. Paint to be used should be conform the ISI No. 109-1950 .SINo 641+642 |
| 16 | Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer,over the plasterd wall surface even and smooth surface as per DSR 2023 S.I. No -13.80 |
| 17 | Finishing walls with Acrylic Smooth exterior paint of required shade: New work (Two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) as per DSR-2023 S.I No. 13.46.1 Two Coats |
| 18 | Providing and fixing in position steel shutters with vertical channels 20×10×2 mm and braced with flat form diagonal 20×5 mm size with top and bottom rail or T-iron 40×40ª6 mm with 38mm dia steel pulley and bolt nuts interlocking arrangement, stoppers handles complete work as per S.I.No.518 |
| 19 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. as per DSR(E&M)-2022 Sl no.1.10.3 Group-C |
| 20 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductorsingle core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.as per DSR(E&M)-2022 Sl no.1.12 |
| 21 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.as per DSR(E&M)-2022 Sl no.1.31 |
| 22 | SupplyingandfixingsuitablesizeGIboxwithmodularplateandcoverinfronton surfaceorinrecess,includingprovidingandfixing6pin5/6&15/16Amodular socket outlet and 15/16 A modular switch, connections etc. as required.as per DSR(E&M)-2022 Sl no.1.32 |
| 23 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.as per DSR(E&M)-2022 Sl no.2.10.1 Single pole |
| 24 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc.20mm dia nominal dia pipes. As per DSR-2023 S.I No.18.8.2 |
| 25 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall25mm dia nominal dia pipes. As per DSR-2023 S.I No. 18.7.3 |
| 26 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS:8931 : As per DSR-2023 S.I No. 18.49.1 |
| 27 | Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 18.50.1 |
| 28 | Providing and fixing C.P.brass angle valve for wash basin and mixer and geyser points of approved qualityconfirming to ISI 8931 as per Enginer-in-charge as per S.I.No.21b.22. |
| 29 | P/F white vetreous china pedestal type water closet (European type) standed size ISI marked Hindware or Equivalent with seal and lid,10 litre low level white vitreous china flushing cistren & CP flush bend fitting & CI brackets,40mm flush bend,overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fitting and bracket,cutting and making good the walls and floors wherever required complete as per direction of Engineer-in-charge SI No 21b.1 |
| 30 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required . White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests:As per DSR-2023 S.I No.17.1.1 |
| 31 | s/f of110 mm dia pvc pipe si 730(a) |
| 32 | s/f of75 mm dia pvc pipe si 730(b) |
| 33 | s/f ofurinal seat . si 21 b 2 |
| 34 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. As per DSR-2023 S.I No. 18.48 |
| 35 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap.As per DSR-2023 S.I No.17.7.4 |
| 36 | Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. Flexible pipe(a) 32mm dia. As per DSR-2023 S.I No.17.28.2.1 |
| 37 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. As per DSR-2023 S.I No.17.31 |
| 38 | Providing and fixing uplasticised 15 mm nominal bore and 45 cm long connection pipe with brass unions : As per DSR-2023 S.I No. 18.21.2.1 |
| 39 | S/F Vitrified Tiles (Kajaria,Beel,J&J or Somani in flooring & skirting laid with 1:3 cement & coarse sand finished with cement slury & pigmnet grouting polishing including supply of all materials, Labour,T&P etc (New Item) |
| 40 | Supply and Fixing of 6 mm china white glazed tile in Flooring and skirting or dedo laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishingcompleteincluding supply of all material, labour, tools and plants etc required for proper completion of the work. SINo 628 |
| 41 | Supply and fixing of M.S sign board.of prescribed size 1.20m *2.75 m with angle 40*40*6 mm iron angle and 1 mm thick ms iron sheet including painting and letter writing complete. |
| 42 | Add 18 % GST Amount |
