In the financial year 2025-26, work of painting, whitewashing, repair etc. of the guest house Karhal Mainpuri. - Dismantling existing plaster including disposal of refuse as directed by Engineer-In-Charge within a distance of 60 meters.. Including cost of all taxes but excluding GST. 2 Scrapping old white or colour wash including disposal of refuse as directed by Engineer-In-charge within a distance of 60 meters (200 feet) Including cost of all taxes but excluding GST. 3 12mm Cement plaster with cement mortar in proportion of 1:3 cement & coarse sand ofsingle coat for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm in girth and finished even and smooth. Including cost of all taxes but excluding GST. 4 15mm Cement plaster with cement mortar in proportion of 1:3 cement & coarse sand ofsingle coat for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm ingirth and finished even and smooth. Including cost of all taxes but excluding GST. 5 Painting 1st coat over priming coat (but excluding cost of priming coat) on steel and other metal surfaces upto 10cm width or girth or small articles not exceeding 0.10 Sq.M. in area with superior synthetic enamel such as Luxol 3, Hi gloss Apcolite, Superlac, Dulux specified brushing to give and even shade and including the cleaning the surface of all dirt, dust and other foreign matter sand papering and scrapping including cost of all materials, labour, tools and plants etc. required for proper completion of work. but for every coat on previous painted surface Including cost of all taxes but excluding GST. 6 Sprit polish including sand paperings cleaning the surface properly and then applying the sprit polish colour with shining finishing supply of all labour material and T&P required for proper completion of work. For old surface. Including cost of all taxes but excluding GST. 7 Finishing walls with POP approved brand and manufacture and of required shade on undacorated wall surface to give even shade over including curing and cost of all material, labour, T&P etc. required for proper completion of work. Including cost of all taxes but excluding GST. 8 Finishing walls with Putty approved brand and manufacture and of required shade on undacorated wall surface to give even shade over including curing and cost of all material, labour, T&P etc. required for proper completion of work. Including cost of all taxes but excluding GST. 9 Finishing walls with deluxe mulitsurfacepaint @ 1.25 Ltr. per 10 Sqm ofapproved brand and manufacture and of required shade on undacorated wall surface to give even shade over including curing and cost of all material, labour, T&P etc. required for proper completion of work.for two coat.over one coat of primer applied 0.75Ltr per 10 Sqm. Including cost of all taxes but excluding GST. 10 Finishing walls with exterior emulsionpaint (Apex) ofapproved brand and manufacture and of required shade on undacorated wall surface to give even shade over @ 1.25 Ltr/10sqm including one coat ofprimer applid @ 0.75Ltr/10sqm coat curing and cost of all material, labour, T&P etc. required for proper completion of work.for two coat. Including cost of all taxes but excluding GST. 11 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. Including cost of all taxes but excluding GST. 12 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. But 15 mm nominal bore, jaquar/hindware/ pareware/ somany/ cera complete best quality. Including cost of all taxes but excluding GST. 13 Providing and fixing C.P. Sink cock of approved quality conforming to IS standards and weighing not less than. But 15 mm nominal bore, jaquar/hindware/pareware/ somany/ cera complete best quality. Including cost of all taxes but excluding GST. 14 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of30x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Including cost of all taxes but excluding GST. 15 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. Including cost of all taxes but excluding GST. 16 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets,cutting and making good the walls wherever require: Including cost of all taxes but excluding GST. 17 Providing and laying brick coba 12mm thick laid with M-150 class brick bat coba 7.50cm thick with gap of 15mm to each other, over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreding cement slurry mixed with acrelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30cmX30cm and side wall parapet shall be mono tythic plaster wall upto 30cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including supply of all material, labour, T&P etc complete for proper completion of work. Including cost of all taxes but excluding GST. 18 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main T runner with suitably spacedjoints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross T of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main T at 600 mm center to center to form a grid of 1200x600 mm and secondary cross T of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T- sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal CeilingLay in plain Tegular edgeGlobal white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made ofG I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. Including cost of all taxes but excluding GST. 19 Providing and laying Vitrified tiles in floor without lean concrete of 600x 600mm sizes (thickness 10mm), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in desired colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, including grouting of joints. Including cost of all taxes but excluding GST. 20 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Including cost of all taxes but excluding GST. 21 Provinding and fixing glass panes with putty and glazing clips in steel doors, windows,clerestory windows all complete with : 4.0 mm thick panes. Including cost of all taxes but excluding GST. 22 Conditions:- SCHEDULE - “C”1- Bitumen V.G.-10 shall be issued from the centralstore CD-3, PWD, Mainpuriat Stock issue rate at the time of issuing the material from the store and the bitumen will be recovered from the contractors bill at the stock issue rate or market rate whichever is maximum.2-Emulsion if available shall be issued from the central store CD-3, PWD, Mainpuriat Stock issue rate at the time of issuing the material from the store.3- There shall be no claim of contractor, if the material is not issued by the department due to non-availability in store or any other reason.4- The unconsumed material issued in excess of bonafide consumption norms, shall have to be returned back to the store as mentioned above, failing which a recovery at the Penaltative rate, i.e., double the issue rate shall be made from the contractor’s bill.5- Contractor have to return empty bitumen drums / emulsion drums immediately, failing which a recovery at the punitive rate i.e., Rs. 3000 per drum shall be recovered from the contractor’s bill.6- The departmental road roller if spare, shall be made available to the contractor at site @ Rs. 2450 per day including POL charges, wages of driver and cleaner. If roller is kept idle due to non-availability of material or labour, recovery @ Rs. 2450 per day shall be made from contractor’s bill for idle period.7- All material should be purchased from approved quarry
