|
| 1 | Excavation in foundation in ordinary soil including lift upto 1.50M and lead upto 30M and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal & disposal of surplus earth as directed by E/I upto a distance of 30M from foundation trenches. SI .251a |
| 2 | Concrete with 4cm guage stone ballast,course sandand cement in proportion of 1:5:10 in foundation and under hoorsing all material, labour, T&P etc. required for proper completion of work. including cost of binding wire (SOR No 274+Diff in cost of ballast). |
| 3 | R.C.C. workwith cement, approved coarse sand & 2cm gauge approved stone girt in proportion of1:1.5:3 in slab exluding supply of reinforcement and its bending, but including its fixing & binding the same with 24 B.W.G.G.I. binding wire & including necessary centering and shuttering etc. and supply of all material, labour, t&p etc. required for proper completion of the work including cost of binding wire (S.I. NO-284a) |
| 4 | Supplying, Fitting and Placing un-coated HYSD/TMT bar Reinforcement in Foundation complete as per Drawing and Technical Specifications. |
| 5 | M.S. or iron work in heavy sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work. |
| 6 | M-150 Brick work in1:4 cement & four coarse sandin foundation and plinth including supply of allmaterials, labour, Tools & plants etc. required for proper completion of the work. SI-305(a) |
| 7 | M-150 Brick work in1:4 cement & four coarse sandin S/S including supply of allmaterials, labour, Tools & plants etc. required for proper completion of the work. SI-309(a) |
| 8 | 12 mm thick plaster with cement and coarse sandmotar 1:4 over brick work minimum thickness plinth with cement and coarse sand.S.I.no-584(a) |
| 9 | Cement Concrete with 2cm, guage approved stone grit, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, tools & plants etc required for proper completion of the work. SI-279 |
| 10 | Finishing wall withweather coat paint of approved make and quality on new work with two coat to give an even shade including supply of all materials,labour, Tools & plant etc. required for proper completion of the work. S.I.no- 662 new item |
| 11 | Supply of 110mm dia PVC Pipe @ 6Kg./CM2 (ISI Marked) approved make as per instruction E/I(SOR-30A(IV) |
| 12 | Providing and laying of interlocking concrete Block pavement having thickness 80 mm as per drawings and technical specification Clause 1504. (Exclusive G.S.B.) |
| 13 | Painting roofs or other iron work in large areas with one coat priming and one coat of approved (above one Sq. Metre) paint (British antesol or equivalent) including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used ISI Marked. SOR 644+645 |
| 14 | Supplying, fixing and keeping in position benches (3 seater each) as per design and drawing complete and as per instruction and approval of Engineer incharge.(MR) |
| 15 | Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 |
| 16 | Cement concrete with 2cm gauge approved stone grit, coarse sand & cement in proportion of 1:1.50:3 in cc pavement (theckness as per design) cement coarse & fine aggregate confirming to IS standard mixed in concrete mixture /Plant of not less then 0.2 cum capacity & appropriate weight batcher using approved mix design, laid in approved fixed form work (steel) channel) laying and fixing of 125 micron thick polythene film, wedges, steel plates including leveling the form work spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including hassion cloth for curring of concrete pavements for not less then 14 days curring compound (where as specified) and water finishing to lines & grade including supply of all material, labour, tools & plants etc. required for proper completion of work and also including complete shifting of Recron 38 fibre reinforcement material etc. |
| 17 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab color of Black, Cherry Red, Elite Brown, Cat Eye or equivalent.DSR-11.56.1 |
| 18 | Providing and fixing of M.S. informatory sign board with frame of 40X40X5mm angle iron and diagonal braces of 25X5mm flat iron. 16 S.W. gauge M.S. Sheet shall be fixed on the M.S. Frame including one coat of ready mixed priming paint and two coats of apporved superior quality ready mixed paint on the whole structure and also painting letters on M.S. Sheet firmly fixed to the ground with 15 grade cement concrete 45X45X60cm B.G.L. Complete as per approved drawing and direction of Engineer-in-charge. (A.R.) |
