Construction Of Gym Building And Supply Of Gym Materials At Ward No 11 In Tiruvallur Municipality -Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand,silt or other loose soil,wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may bedirectedexceptinhardrockrequiring blastinginclusive of shoring shuttering, ,and baling out water and cleaning and levelling the site etc.,complete ForFootings 2 Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand,silt or other loose soil,wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may bedirectedexceptinhardrockrequiring blastinginclusive of shoring shuttering, ,and baling out water and cleaning and levelling the site etc.,complete For Plinth beam 3 Supplying and filling in foundation, basement, etc with filling sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. 4 Plain Cement Concrete 1:4:8 (One Cement, Four sand and Eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundationincluding dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification 5 Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oakjoists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)For Plinth beam 6 Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oakjoists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)For Column 7 Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oakjoists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)For Slab and Beam 8 Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards. (No separate payment will be made by the Department for the excess usage of materials) -Upto Basement 9 Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification.(Contractor has to make his own arrangements for the supply of steel and binding wire) 10 Supplying and fixing of Solid Blocks of size 40cm x 20cm x 20cm confirming to SS 2145-1965 (including jam blocks closers etc.,) made in CC 1:3:6 (One Cement Three fine agreegate and Six course aggregate in C.M.1:5 (One Cement and five Fine agreegate) for masonary wall partition and wall including etc., complete 11 Supplying and fixing of Solid Blocks of size 40cm x 15cm x 20cm confirming to SS 2145-1965 (including jam blocks closers etc.,) made in CC 1:3:6 (One Cement Three fine agreegate and Six course aggregate in C.M.1:5 (One Cement and five Fine agreegate) for masonary wall partition and wall including etc., complete 12 Plain Cement Concrete 1:1.5:3 (one cement, one and half fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour chargesetc., complete as per standard specification 13 Plain Cement concrete 1:2:4(one cement,Two sandand four aggregates)using 20mm ISS HBG metal including all the cost and conveyance of material from an approved quarry including all the labour charges for laying ,curing etc complete as per standard specification. 14 Special ceiling plastering in all floors and finishing the exposed surface of RCC items of work such as slab, beam, sunshade, facia, canopy slab, staircase waist slab, landing slab etc., with cement mortar 1:3 (One cement and three sand) 10mm thick including hacking the surfaces and providing cement mortar nosing, beading for sunshade, staircase, step, landing slab etc., including neat finishing and curing etc., complete complying with standard specification and as directedby the departmental officers. 15 Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. 16 Supplying and fixing of MS grills with Door and windows with one coat of Red oxide with primer including all costs such as welding, grinding and fabrication charges, cost and conveynace of all materials to site etc, compete as per standard specification. 17 Supply and Delivery Fabrication of MS doors and windows with outer frame and shutter frame in MS angle of size 40mm x 40mm x 6 mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., 0.90x2.10 Door (Twad sor Pg no 87) 18 Supply and Delivery Fabrication of MS doors and windows with outer frame and shutter frame in MS angle of size 40mm x 40mm x 6 mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., 1.20x1.20 Window (Twad sor Pg no 87) 19 Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) 20 White washing two coats with freshly burnt white shell lime in all floors including cost of lime, blue powder fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed. 21 Supplying and painting the walls with two coats of cement paint as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications (The colour and shade of the cement paint shall be got approved by the Executive Engineer before use of work). 22 Supplying and laying Rubberised interlocking Paver blockM40 grade 80mmthick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approvednon skitting surface in the top and the rate including levelling the base preparation ofpavers as sub base, stone dust cushion 150mm thick layingout of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,. 23 supply and filling gravel including cost and conveyance of materials from and approved quarry including all labour charges for filling etc completed as per standard specification 24 Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers. 25 Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers 26 Supply and fixing of TNEB Board suitable for 3 Phases 63A service connection made up of suitable angle iron frame work of size 2 feet x 1 1/2 feet using angle iron of size 1 1/2 x 1 1/2 x 1/4 rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos 63A fuse units(500V) 1 No. Neutral link, copper earth flat of size 1 x 1/4 with inter connection of EB meter to fuse units by 7/16 PVC insulated copper wire with earth connection complete.SD 131 27 Supply and fixing of 200 Amps. TPN sheet steel double break switch with HRC fused and neutral on suitable angle iron frame work with MS cable entry boxes and PWD earthing as per SD 170 28 Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch with continuous earth wire connection of 14 SWG TC wire for PVC Open light point / Fan point (For Electronic regulator). SD 22 29 Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x l00 x 113 mm TW switch box for 5 A 3 pin non inter locking CS plug with painting of suitable colour with continuous earth wire connection of 14SWG TC wire for open PVC plug point. SD 36 30 Supply and run of 2 of 1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour. SD 54 31 Earthing as per P.W.D. standard with an earth electrode of 2Mtr. Class B GI pipe of dia not less than 32mm complete with necessary masonry work. SD 234 32 Supply and fixing of Horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure with 40 A 4 pole MCB isolater as incoming and 12 Nos. 6A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCBs should be with the ISI mark (lik standard make) SD. 179 33 Supply and run of 2 of No.8 SWG GI wire for guarding with cradle with No.8 SWG GI wire at the equal interval of 1.5m SD.75 34 Supply and run of 4 X 6 sq.mm (84/0.3) 7/20sqmm PVC unshealed copper cable in suitable PVC rigid pipe concealed on wall and ceiling withcontinuos earth wire connection of 14 SWG TCwire with painting of suitable colour SD 68 35 Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications.The PVC pipes shall be got approved by Executive Engineer before use on works. 25mm PVC pipe 36 Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications.The PVC pipes shall be got approved by Executive Engineer before use on works. 110mm PVC pipe 37 Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications.The PVC pipes shall be got approved by Executive Engineer before use on works 90mm PVC pipe 38 Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications.The PVC pipes shall be got approved by Executive Engineer before use on works 25mm PVC Elbow 39 Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications.The PVC pipes shall be got approved by Executive Engineer before use on works 110mm PVC Bend 40 Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications.The PVC pipes shall be got approved by Executive Engineer before use on works 90mm PVC Bend 41 Supply and Erection of Olympic Flat Bench Press Exercise for pectorais major muscles (chest Muscles) Exercise performed with Weight lifting 7feet barbell. Barebell rack fixed an additional part SS material in main structural. In a two levels between their heights. Plate loaded on main frame both side.Supported and rest for back muscles and head. Supported cushion made on hard firm with high durable rexin. ideal for commercial gym. Elliptical tube extra heavy duty 2x4 11-gauge steel mainframe. Size: L-1500xW-1150x H-1200 Weight : 75kgs 42 Supply and Erection of Olympic Incline Bench Press Exercise for Upper Pectorals major muscles (Upper Chest Muscles) Exercise performed with Weight lifting 7feet barbell. Barebell rack fixed an additional part SS material in main structural. In a two levels between their heights. Plate loaded on main frame both side.Supported and rest for back muscles head and hip. Supported cushion made on hard firm with high durable rexin. ideal for commercial gym. Elliptical tube extra heavy duty 2x4 11-gauge steel mainframe. Size: L-1500xW-1150x H-1300 Weight : 98kgs 43 Supply and Erection of Biceps preacher curl bench Exercise for iceps Muscles (Lower head and peak muscles) exercise performaed with Weight lifiting 4 feet barbell. Borbell rack fixed an additional part SS material in main structural.supported and rest for hip and arms Supported cushion made on hard firm with high durable reksin. Ideal for commercial gym. Elliptical tue extra heavy duty 2x4 11-gauge steel mainframe size:L-700xW-750XH-900 Weight : 36kgs 44 Supply and Erection of Adjustale Abdominal Bench Exercise for Abdominal Muscles (Lower and Upper Adbominal muscles) exercise performed with manual movements on incline and decline. Spring lock with multifunctional adjustment in flat, incline and decline,between their height and exercise levels.supported and rest for Ankel,calf muscle, back and head. supported cushion made on hard firm with high durable reksin.Ideal for commercial ym and home. Elliptical tube extra heavy duty 2 x 4 11-gauge steel mainframe. Weight :43kgs. 45 Supply and Erection of Adjustable Multifunction Bench Multi group of exercise Assisting for weight lifting barbell,weighted dumbbells and free hand exercise. Exercise performed with manual movements on flat,incline and decline. Spring lock with multifunctional adjustment in flat,incline and decline,between their height and exercise levels. supported and rest for hip and back muscles. supported cushion made on hard firm with high durable reksin. ideal for commercial gym and home. elliptical tube extra heavy duty 2x4 11-guage steel mainframe.Size: L-1300 x W-550 x H-450 Weight:43kgs. 46 Supply and Erection of Plate Tree Weight Lifiting Plate Racking on sub individual ms rod. Rod insert and support on the main structurals.Square tube structure 2 x 2 frame coating : Grid blast with electro thermal coating and top clear. Size: L-640 x W-500 x H-850 weight : 25kgs. 47 Supply and Erection of Dumbbells Rack Weight lifiting dumbbells racking stand Every individual Dumbbells will rest on hard plastic curve shape part and it fix on two bolt and nuts. 40numbers of hand plastic curve shape part in dumbbells stand it will place 20 numbers of dumbbells will place on it. Ideal for Commercial gym and Home Elliptical tube extra heavy duty 2x4 11-guage steel mainframe Weight:74kgs 48 Supply and Erection of T-Bar Row Exercise for lat muscies (back muscles) Axis frame one a constant structure frame and other main action force to movements.Hard Rubber platform rest on the main structure frame to hold the standing grip for safety movements.Rubber hand grip to hold the grip on both end of the handle bar. Front bar capacity for 500kg lift. All leg supported on rubber grip for safety.Elliptical tube extra heavy duty 2x4 11-guage steel mainframe Weight :64kgs 49 Supply and Erection of Dumbbells Weight lifiting dumbbells made on mild steel material and covered with poly rubber.It prevents the injuries and damages. Hand grip on MS rod with nickel coating with knurling hand grip 50 Supply and Erection of Plate Weight lifiting plate made on steel castaien material. With 30 degree dia holes. 51 Supply and Erection of Barbells MS Steel bar with nickel coating with knurling hand grip.MS bar with nickel coating with hand gripfor adjustable weight lifiting. 52 Add Gst 18%
