Repair/Renovation Of Cfc At Silk Tech Park Zakura- 1 Cleaning the surfacesby way ofremoving dirt, dust, bird dropping, grease, oil, algae, fungue, monkey beats, vegetable growth etc. includingwashing the surface with clean water with the help of pressure jet machine, windows door etc, by suitable covering so as to avoid any damage to the building/structure, including disposal of thecollected waste etc.all as per directions of Engineer-in-charge (Labours) 2 Grinding ,Polishing the marble/granite, veteifiedfloor surfacesincluding necessary colouring etc. to make the existing floors functional includingdisposal of the rubish and other wastesetc. all as per directions of Engineer-in-charge 3 Providing and applying cement based wall putty of required thickness over plastered surface to prepare the surface even and smooth complete in specified areas as per specified patter. (2mm thick) 4 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete 5 Providing and fixing12mm thick T&G planks made of imported wood (New zealand pine or equivalent)on wood work in false ceiling, wall/wall partitions sawn and put up in position ( budloo wood Ceiling Joists of 50 mm x 65 mmin sections placed @ 600 mm C/C both ways or as required at site). on steel trusses etc.including cost of necessary adhesive &cost of nails etc.all completeupto floor 5 levelas per the directions ofEngineer-in-charge(including cost of all material, leads, lifts and carriages etc upto site of work complete).(For Ceilings,Soffits etc.) 6 Providing and fixing 35 mm thick paneled door shutters (Ist class Kail Wood).With 25-30mmthickOrnamentals Kail Wood panelsincluding necessary stainless Steel Butt hinges /screws etc. Design of shutter and panels as per the instructions of Engineer inchargecomplete in all respects. 7 Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.(First class kail wood) (35 mm thick) 8 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding tubes channels, plates etc. including welding ,grinding, buffing, polishingand making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slabwith suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 9 Extra for Providing & fixing of stainless steel navel post (Ornamental) including top ball of 304 grade of required height duly anchored to floor with dash fasteners Complete as per the directions of Engineer incharge. 10 Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing /panelling, C.P. brass / stainless steel screws, including all hardware fittings as required all complete as per architectural drawings & as per the directions of Engineer incharge. (glazing, panelling and dash fasteners to be paid for separately. (For fixed portion/Doors/windows ) Powder coated aluminum (minimum thickness of powder coated 50 microns including all necessary fittings complete ) 11 Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge(Pre-laminated particle board with decorative lamination on both sides) 12 Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.)With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm) 13 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot &double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). 14 Providing and fixing aluminum tubular handle bar 32mm outer dia, 3.0mm thick & 2100mm long with SS screw etc. complete as per direction of Engineer-in-charge.(Polyester powder coated minimum thickness 50 micronaluminum tubular handle bar) 15 Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineerin-plate etc. complete as per the direction of Engineer-in-charge. (With brass cover plate minimum 1.25 mm thickness) 16 Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture 17 Finishing walls with 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives .New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. 18 French spirit polishing, Two or more coats on new works including a coat of wood filler 19 Providing and fixing 600 mm x 450 bevelled edge mirror of ,5.5 mmthick of float glass ( of approved quality)Complete with 6 mm tick hard board ground fixed to wooden cleats with CP brass screws and washers complete. 20 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required (White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests). 21 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:(W.C. pan with ISI marked white solid plastic seat and lid.) 22 Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :(White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap ) 23 Providing & fixing of Geyser of 25 litercapacityof approvedbrandcomplete withall necessary geyser bolts/fire volts. complete in all respects Racold /havells/Venus brandincluding all fittings, fixtures complete 24 Providing andfixing of CP connections 450mm long for Geysers, Low level Cistern , wash basins etc.complete in all respects as desired by Engineer I/C. 25 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 26 Steel work welded in built up sections/framed work, including cutting ,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.ForBase Support of Water Storage tank etc.over roof topas perspecified and designs of consultant/Site Engineer .In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 27 Providing andfixing of CPBath fixtures/fittings of Approved brand Preferabelly Jaquar make (Continental Series) or equivalent as desired by Engineer I/C.of the following nominalbore/dia.15mm dia Bib Cock (long body Type) 28 15mm dia Angel Value 29 15mm Basin Mixer for wash basin 30 15mm wallMixer for bath rooms 31 Dual Health Feacuet with Bib cock 2 in 1 with Chain complete in all respects 32 CP Stop Cock Concealed for Showers,Gysers Basin etc. complete in all respects 33 CP Soap Case heavy Type complete in all respects 34 CP long Twel Rod 600 mmlongComplete in all respects 35 Stainless Steel Hangers with 6 hooks (Heavy Type) 36 CP nipples 15mm dia 100 mm long 37 CP nipples 15 mm dia 200 mm long 38 Tanki Nipple with jam nuts etc 15mm dia 300 mm long for water storage Tank 39 C.P Gratings of requredSizecomplete. 40 Lighting Point with wire complete Job. 41 Heating with wire complete Job. 42 P/F of concealing 10 watt LED including all necessary fitting complete job (Havells or equivalent) 43 Wiring for lights/Power Plug/Circuit/Sub main along with earthing of followingsizes of FRLSPVC insulation copper conductor single core cable in surface complete job (Havells or Polycab) 1) 25mm 44 2) 1.5mm 45 3) 1mm 46 4) Main line 7/16 cable 47 P/Fof Celling fan (1200mm sweep 5 star) including all necessary fitting complete job (Havells or equivalent) 48 Supply & fixing following way, single pole & neutral sheet, steel MCB distribution board, 240v on surface complete job with lined copper bus bar, neutral bas bar fin bar.1) 16 amp MCB S/P 49 2) 32 amp MCB. 50 3) 63 amp MCB 51 4) 25 amp MCB S/P 52 P/F of exhaust Fan (300mm) including all necessary fitting complete job. 53 SI T&C of conductor pipes (PVC) including all necessary fitting complete job 25mm. 54 Supply & fixing of following modular switches/sockets on the existing modular plate & switch box including P/F of 3 pin 5/6 AA) 5/6 Amp switch (3 pin 5/6) Amp socket outlet galaxy white socket & GI Box with modular plate cover complete job. 55 B) 5/6 Amp Switch 56 Supply I; T&C & fitting suitable size G.T box with modular plate on surface (cover) in front & P/F 6 pin 15/16 amp modular socket & 15/16 amp modular switch, connecting etc as required (switch 16A x insysta & 6/16 A glossy white with modular plate of Hayer or Legend 2/4/6/8/10 way & face plate. 57 SIT & C of cubical type main LT panel Boxes suitable for 415 V3 phase 4 wire 50 HZ AC.SITC system including incoming, Outgoing, Bus Bars, interlocking etc as required as per the following description (IP – 4z) sizedept 425mmIncoming: -Thermal magnetic board MCCB 160 amps FPICV = ICS = 100% with braking capacity 50 KA (1 No) Indicating Lamps RYB (1 set) Voltmeter 0 – 500 Volts (1 No) Ammeter (0 – 150 A) (1 No) Selector Switch (2 No) Current transformer 100/SA 10 VA Burten class – T (1 set) Aluminum Busbal 300 amps FPE 91 E grase Electrolytic by pass changeover (100 A)-(1No)DP MCB 16 A (2 No’s)Outgoing:Thermal magnetic base MCCB 63 amp FPICV = ICS=100% with breaking capacity 36 KA (2 No)Load bearing number to be made out of 2.00 mm CPCA sheet gland plates to be 3.00 mm thick 58 SITC of the following rating of UPS system with inbuilt isolation transformer including loading, unloading transportation from store to site, errection installation, testing of Ups system including battery & battery rack (S.S) installation under the supervision of supplier of UPS made of 10 KVA UPS, input 1 phase 3 wire & output 1 phase 3 wire with 120min backup including all necessary fitting complete job. (male Eaton/APC/Equavalant.
