Tender For 50 Bedded Civil Hospital At Killar Ff System
Tender Value
Ref. Documents
Estimated cost
Bid Submission
19 Sep 2025
0 days left
EMD
34704
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
pangi → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For 50 Bedded Civil Hospital At Killar Ff System
BOQ
| Sl. No. | Item Description |
| 1 | (A) Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump)(B) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal confirming to IS:1520(C) Suitable HP squirrel cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horizontal foot mounted type with Class-\"F\" insulation, conforming to IS-325.(D) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.(E) Suitable cement concrete foundation duly plastered and with anti vibration pads. |
| 2 | 900 lpm at 35 m Head |
| 3 | Fabrication, Supplying, installation, testing & commissioning of electrical control panel of cubical construction, floor mounted type, fabricated out of 2 mm. thick CRCA sheet, compartmentalized with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter-connection, having switchgears and accessories mounting and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for operation on 415V, 3 phase, 50Hz AC supply with enclosures protection class IP 42 as required. |
| 4 | TERRACE PUMP CONTROL |
| 5 | 100 Amps. 30KA 4 Pole MCCB Ics=100% Icu - 01 No. |
| 6 | 40 Amps Three Pole \"C\" Curve MCB-02Nos |
| 7 | Digital VAF+PF meter for incoming with CTs of 60/5 having 0.5 accuracy class VAF+PF meter - 01 NoL&T 4110 series 0.5 accuracy class or SS make. |
| 8 | 3 Phase LED type indicating lamps with toggle switch.-01 set. |
| 9 | Suitable HP DOL Starter with over load protection, current sensing type single phase preventer, Push button, LED light for ON complete with all accessories and internal wiring required for automatic operation forterrace pump. - 02 Nos. |
| 10 | Selector switch for local/ remote, auto / manual/ off operation On / OFF indication lamp etc. - 02 Sets. |
| 11 | 100A rating 4 strip Aluminium BUS BAR - 01 set. |
| 12 | Supplying & Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. |
| 13 | 3½ X 25 sq. mm Aluminium conductor armoured cable |
| 14 | 3 X 10 sq. mm Aluminium conductor armoured cable |
| 15 | Supplying & Laying of control wiring with multicore copper stranded conductor XLPE armoured cable of 1.1 KV grade of following size between various sensors and system controller/starter etc in pump house & outside on surface/in existing cable tray complete with connections etc as required. |
| 16 | 2 x 1.5 sq. mm |
| 17 | 4 x 1.5 sq.mm |
| 18 | Supplying, and making end termination with brass compression gland & Aluminium lugs for following sizes of PVC insulated, PVC sheathed/XLPE Aluminium conductor cables of 1.1 KV grade as required. |
| 19 | 3½ X 25 sq. mm (28mm) |
| 20 | 3 X 10 sq. mm (22mm) |
| 21 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 22 | Supplying and fixing M.S. angle iron support made out of 40X40X5mm angle with U Bolts & anchor fastener duly painted with red oxide & P.O. red paint suitable for pipe size 50 mm dia to 150 mm diaetcas required |
| 23 | Providing laying, testing & commissioning of \"C\" class heavy duty MS Pipe conforming to IS 1239/IS3589/ i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anti-corrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. |
| 24 | 150 mm dia |
| 25 | Providing, laying, testing & commissioning of \"C\" class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : |
| 26 | 25 mm dia |
| 27 | 50 mm dia |
| 28 | 80 mm dia |
| 29 | 100 mm dia |
| 30 | Providing, laying, testing & commissioning of \"B\" class medium duty GI pipe conforming to IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : |
| 31 | 25 mm dia |
| 32 | 32 mm dia |
| 33 | 50 mm dia |
| 34 | 80mm dia |
| 35 | 100 mm dia |
| 36 | Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type-A) with blank Gunmetal/Stainless Steel cap and chain as required : |
| 37 | Single headed Stainless steel |
| 38 | Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required: |
| 39 | Single headed Stainless steel |
| 40 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : |
| 41 | 50 mm dia |
| 42 | 80 mm dia |
| 43 | 100 mm dia |
| 44 | 150 mm dia |
| 45 | Supplying, fixing, testing and commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gunmetal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required (For suction & delivery side of pumps) : |
| 46 | 50 mm dia |
| 47 | 150 mm dia |
| 48 | Supplying & fixing orifice plate made out of 6mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external & internal hydrants to reduce pressure at the outlet to the level of 3.5kg/cm² complete as required. |
| 49 | Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS:5312 complete with rubber gasket, GI bolts, nuts, washers etc. as required : |
| 50 | 80 mm dia |
| 51 | 100 mm Dia |
| 52 | 150 mm Dia |
| 53 | Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. |
| 54 | 80 mm dia |
| 55 | 100 mm dia |
| 56 | Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with Gl wire, rivets etc. conforming to IS 636 (type-A) as required: |
| 57 | Stainless Steel (Grade 304) |
| 58 | Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 1258520 mm nominal internal dia gun metal globe valve & nozzle.Drum and brackets for fixing the equipments on wall.Connections from riser with 25 mm dia stop gun metal valve &M.S. Pipe and socket. |
| 59 | 30 m |
| 60 | Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required: |
| 61 | Stainless Steel (Grade 304) |
| 62 | Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required: |
| 63 | 2 way-100 mm dia M.S. Pipe |
| 64 | Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required. |
| 65 | Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : |
| 66 | Pendent Sprinkler |
| 67 | Horizontal side wall Sprinkler |
| 68 | Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. |
| 69 | Supply, Installing, testing and commissioning of sprinkler flexible pipe (UL Listed) of strainless steel complete with NTP on reducer thread with maximum working pressure of 175 PSI, test pressure of 875 PSI (Brust) with branch line (Inlet) 25mm NPT male thread to sprinkler head (outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stock bar of following sizes complete as required. |
| 70 | 700 mm |
| 71 | 1000mm |
| 72 | Supply, Installing, testing and commissioning of 25 mm dia gate valve with all accessories as required. |
| 73 | Supplying and installing pressure gauge of 100 mm dia 0-16 kg. per cm. square fitted with 12/15 mm dia pad cock valve etc. Complete as required. |
| 74 | Providing & fixing fibre glass reinforced Double Door Fire Hose Cabinet (30\"x24\"x10\")outdoor type, made out of 18SWG sheet having glazed door with 6mm thick clear Glass including necessary Locking arrangement with allen Key, powder coating with Post Office Red Paint and for Housing 2 Nos .RRL Hose Pipe, 1 No Branch pipe including grounding and suitable inscription the words\" Hose Cabinet\" on the Box complete as required. |
| 75 | Providing & fixing of ISI marked confirming to IS:16018:2012 wheeled CO₂ type fire extinguisher of 22.5 Kg Capacity, including valve, discharge hose, trolleywith heavy duty wheel assembly & handle, locking arrangement, printed serial number complete in all respects including initial fill with CO₂ gas as required. (M/s Minimax/Lif Guard/Cease fire/Fire Squard Similar superior make) |
AI Tender Summary
Tender Timeline
Sep 08, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedSep 19, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 20, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender