Annual Maintenance Of Direction Board In Wc 1, 2 And 3 Area, Noida. - Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m. All kinds of soil 2 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) 3 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Electric resistance or induction butt welded tubes 4 Finishing with Epoxy paint (two or more coats) at all locations preparedand applied as per manufacturer’s specifications including appropriatepriming coat, preparation of surface, etc. complete.On steel work. 5 Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-incharge.( Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured forpayment).Overhead informatory road signage 6 Retro-Reflective sheeting type-XI with 4mm thick ACM single SideProviding & Fixing of reflective signs with a corrosion resistant 4mm thick with 0.4 to 0.5 mm both side aluminium skin aluminium composite panel face to be fully covered with High intensity prismatic sheeting type XI as per IRC-67:2012 retro reflective sheeting with back frame MS angle of 35x35x5mm Legenda, letters, numerals and borders etc should be as per MoRTH specification No-801.3.7. The Sheeting shall have a pressure- Sensitive adhesive of the aggressive lack type requiring no heat. solvent other preparation for adhesion to a smooth clean surface, in a manner recommended by the sheeting manufacture. The ACM (Aluminium Composite Materials) Shall be fixed on the Back frame MS Angle with riveting. Micro Prismatic type IV Retro reflective sheeting confirming to ASTM D4956-09 Shall be pressure fixed. The Retro reflective, daytime colour and luminance, shrinkage, flexiblitily, liner removal, adhesion, impact resistance, specular glass and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obrained from international/Government Laboratory/institute by the manufacture of the sheeting and in case the certificate is obtained from internation condition, it should also be obtrained from indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively a certificate conforming to ASTM Specification (D4956-09) on artifical accelerated weathering requirements from a reputed laboratory in india can be accepted provisionally, in such a situation, the Employer/Client. if so desires, could seek for a performance guarantee, in such a situation, the Employer/Client. if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012 & Proof of the same Report shall be uploaded which quoting tender. The rate shall include all materials, labour, T&P, Transportation, installation and incidentals all complete as per direction of the Engineer-in-chage. 7 Retro-reflectorised Traffic sign as per IRC-67-2012Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC 67-2012 made of high intensity grade sheeting type-IV vide clause 801 3, fixed over aluminium sheeting 15 mm thick supported on a mild steel angle iron post 75 mm X 75 mm X 6 mm firmly fixed to the ground by means of property designed foundation with M 15 grade cement concrete 45 cm X 46 cm X 60 Cm , 80 cm below ground level as per approved drawing. The reto reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, day time colour luminance shrinkage flexibility siner removal adhesion, impact resistance, specular gloss and fungus resistance 3 years outdoor weathering and its having passed these tests shall be obtained from international government laboratory institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition it should also be obtained from indian condition within 3 years of launching of product by the manufacturein abroad atternatively a certificate conforming to ASTM specification to 495609 on artificial accelerated weathering requirements from a reputed laboratory in india can be accepted provisionaly in such a situation the employer/cllient so could seek for a performance guranttee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67 2012 Legends letters numerals and borders etc should as per McRth Specification No. 60137. Proof of the sama in form of government report shall be uploaded while quoting tender. 30X90 cm (Left/Right) Object Hazard. 8 Retro-reflectorised Traffic sign as per IRC-67-2012Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC 67-2012 made of high intensity grade sheeting type-IV vide clause 801 3, fixed over aluminium sheeting 15 mm thick supported on a mild steel angle iron post 75 mm X 75 mm X 6 mm firmly fixed to the ground by means of property designed foundation with M 15 grade cement concrete 45 cm X 46 cm X 60 Cm , 80 cm below ground level as per approved drawing. The reto reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, day time colour luminance shrinkage flexibility siner removal adhesion, impact resistance, specular gloss and fungus resistance 3 years outdoor weathering and its having passed these tests shall be obtained from international government laboratory institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition it should also be obtained from indian condition within 3 years of launching of product by the manufacturein abroad atternatively a certificate conforming to ASTM specification to 495609 on artificial accelerated weathering requirements from a reputed laboratory in india can be accepted provisionaly in such a situation the employer/cllient so could seek for a performance guranttee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67 2012 Legends letters numerals and borders etc should as per McRth Specification No. 60137. Proof of the sama in form of government report shall be uploaded while quoting tender.60 cm equillateral tringle with diffinilation plate (20 cm X 60 cm) 9 Retro-reflectorised Traffic sign as per IRC-67-2012Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC 67-2012 made of high intensity grade sheeting type-IV vide clause 801 3, fixed over aluminium sheeting 15 mm thick supported on a mild steel angle iron post 75 mm X 75 mm X 6 mm firmly fixed to the ground by means of property designed foundation with M 15 grade cement concrete 45 cm X 46 cm X 60 Cm , 80 cm below ground level as per approved drawing. The reto reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, day time colour luminance shrinkage flexibility siner removal adhesion, impact resistance, specular gloss and fungus resistance 3 years outdoor weathering and its having passed these tests shall be obtained from international government laboratory institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition it should also be obtained from indian condition within 3 years of launching of product by the manufacturein abroad atternatively a certificate conforming to ASTM specification to 495609 on artificial accelerated weathering requirements from a reputed laboratory in india can be accepted provisionaly in such a situation the employer/cllient so could seek for a performance guranttee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67 2012 Legends letters numerals and borders etc should as per McRth Specification No. 60137. Proof of the sama in form of government report shall be uploaded while quoting tender. 80 mm X 60 mm rectangular with diffinilation plate (20 cm X 60 cm) 10 Retro-reflectorised Traffic sign as per IRC-67-2012Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC 67-2012 made of high intensity grade sheeting type-IV vide clause 801 3, fixed over aluminium sheeting 15 mm thick supported on a mild steel angle iron post 75 mm X 75 mm X 6 mm firmly fixed to the ground by means of property designed foundation with M 15 grade cement concrete 45 cm X 46 cm X 60 Cm , 80 cm below ground level as per approved drawing. The reto reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, day time colour luminance shrinkage flexibility siner removal adhesion, impact resistance, specular gloss and fungus resistance 3 years outdoor weathering and its having passed these tests shall be obtained from international government laboratory institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition it should also be obtained from indian condition within 3 years of launching of product by the manufacturein abroad atternatively a certificate conforming to ASTM specification to 495609 on artificial accelerated weathering requirements from a reputed laboratory in india can be accepted provisionaly in such a situation the employer/cllient so could seek for a performance guranttee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67 2012 Legends letters numerals and borders etc should as per McRth Specification No. 60137. Proof of the sama in form of government report shall be uploaded while quoting tender. 60 cm circular with diffinilation plate (20 cm X 60 cm) 11 Retro-reflectorised Traffic sign as per IRC-67-2012Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC 67-2012 made of high intensity grade sheeting type-IV vide clause 801 3, fixed over aluminium sheeting 15 mm thick supported on a mild steel angle iron post 75 mm X 75 mm X 6 mm firmly fixed to the ground by means of property designed foundation with M 15 grade cement concrete 45 cm X 46 cm X 60 Cm , 80 cm below ground level as per approved drawing. The reto reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, day time colour luminance shrinkage flexibility siner removal adhesion, impact resistance, specular gloss and fungus resistance 3 years outdoor weathering and its having passed these tests shall be obtained from international government laboratory institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition it should also be obtained from indian condition within 3 years of launching of product by the manufacturein abroad atternatively a certificate conforming to ASTM specification to 495609 on artificial accelerated weathering requirements from a reputed laboratory in india can be accepted provisionaly in such a situation the employer/cllient so could seek for a performance guranttee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67 2012 Legends letters numerals and borders etc should as per McRth Specification No. 60137. Proof of the sama in form of government report shall be uploaded while quoting tender. 50 X 60 cm Single Chevron
