tender for Drain Work And Aluminum Door Work At Sdf Building- 1 SURFACE DRESSING OF THE GROUND IN ANY KIND OF SOILINCLUDING REMOVING VEGETATION INEQUALITIES NOTEXCEEDING 15 CM DEPTH AND DISPOSAL OF The rubbish within a lead upto 75 m as directed. 2 EARTH WORK IN EXCAVATION OF FOUNDATION TRENCHES ORDRAINS, IN ALL SORTS OF SOIL (INCLUDING MIXED SOIL BUTEXCLUDING LATERITE OR SANDSTONE) INCLUDING REMOVING,SPREADING OR STACKING THE SPOILS WITHIN A LEAD OF 75 M.AS DIRECTED. THE ITEM INCLUDES NECESSARY TRIMMING THESIDES OF TRENCHES, LEVELLING, DRESSING AND RAMMING THEBOTTOM, BAILING OUT WATER AS REQUIRED COMPLETE. Depthof excavation not exceeding 1,500 mm. 3 DISMANTLING ALL TYPES OF MASONRY EXCEPTING CEMENTCONCRETE PLAIN OR REINFORCED, STACKING SERVICEABLEMATERIALS AT SITE AND REMOVING RUBBISH AS DIRECTEDWITHIN A LEAD OF 75 M. In Ground floor including roof. 4 REMOVAL OF RUBBISH,EARTH ETC. FROM THE WORKING SITEAND DISPOSAL OF THE SAME BEYOND THE COMPOUND, INCONFORMITY WITH THE MUNICIPAL / CORPORATION RULES FORSUCH DISPOSAL, LOADING INTO TRUCK AND Cleaning the site inall respect as per direction of Engineer in charge. 5 EARTH WORK IN FILLING IN FOUNDATION TRENCHES OR PLINTHWITH GOOD EARTH, IN LAYERS NOT EXCEEDING 150 MM.INCLUDING WATERING AND RAMMING ETC. LAYER BY LAYERCOMPLETE. (PAYMENT TO BE MADE ON THE BASIS OFMEASUREMENT OF FINISHED QUANTITY OF WORK). With earthobtained from excavation of foundation. 6 SINGLE BRICK FLAT SOLING OF PICKED JHAMA BRICKSINCLUDING RAMMING AND DRESSING BED TO Proper level andfilling joints with local sand. 7 BRICK WORK WITH 1ST CLASS BRICKS IN CEMENT MORTAR (1:6).In foundation and plinth. 8 125 MM. THICK BRICK WORK WITH 1ST CLASS BRICKS IN Cementmortar (1:4) in ground floor. 9 ORDINARY CEMENT CONCRETE (MIX 1:1.5:3) WITH GRADEDSTONE CHIPS (20 MM NOMINAL SIZE) EXCLUDING SHUTTERINGAND REINFORCEMENT IF ANY, IN GROUND FLOOR AS PERRELEVANT IS CODES. Pakur Variety 10 ORDINARY CEMENT CONCRETE (MIX 1:2:4) WITH GRADED STONECHIPS (20 MM NOMINAL SIZE) EXCLUDING SHUTTERING ANDREINFORCEMENT,IF ANY, IN GROUND FLOOR AS PER RELEVANTIS CODES. Pakur Variety 11 HIRE AND LABOUR CHARGES FOR SHUTTERING WITHCENTERING AND NECESSARY STAGING UPTO 4 M USINGAPPROVED STOUT PROPS AND THICK HARD WOOD PLANKS OFAPPROVED THICKNESS WITH REQUIRED BRACING FORCONCRETE SLABS, BEAMS AND COLUMNS, LINTELS CURVED ORSTRAIGHT INCLUDING FITTING, FIXING AND STRIKING OUTAFTER COMPLETION OF WORKS (UPTO ROOF OF GROUNDFLOOR). 25 mm to 30 mm thick wooden shuttering as per decision &direction of Engineer-In-Charge. 12 REINFORCEMENT FOR REINFORCED CONCRETE WORK IN ALLSORTS OF STRUCTURES INCLUDING DISTRIBUTION BARS,STIRRUPS, BINDERS ETC INITIAL STRAIGHTENING ANDREMOVAL OF LOOSE RUST (IF NECESSARY), CUTTING TOREQUISITE LENGTH, HOOKING AND BENDING TO CORRECTSHAPE, PLACING IN PROPER POSITION AND BINDING WITH 16GAUGE BLACK ANNEALED WIRE AT EVERY INTERSECTION,COMPLETE AS PER DRAWING AND DIRECTION. OTHERMANUFACTURERS NOT SPECIFIED. For works in foundation andupto roof of ground floor/upto 4 m. 13 PLASTER (TO WALL, FLOOR, CEILING ETC.) WITH SAND ANDCEMENT MORTAR INCLUDING ROUNDING OFF OR CHAMFERINGCORNERS AS DIRECTED AND RAKING OUT JOINTS INCLUDINGTHROATING, NOSING AND DRIP COURSE,SCAFFOLDING/STAGING WHERE NECESSARY (GROUND FLOOR).[EXCLUDING COST OF CHIPPING OVER CONCRETE SURFACE].WITH 1:6 CEMENT MORTAR. 20 mm thick plaster. 14 NEAT CEMENT PUNNING ABOUT 1.5MM THICK IN WALL, DADO,WINDOW SILL, FLOOR ETC. NOTE: Cement 0.152 cu.m per100sq.m. 15 SUPPLYING PROFILES OF REQUIRED SECTION MADE OFALUMINIUM ALLOY EXTRUSIONS CONFORMING TO IS: 732-1983AND IS: 1285- 1975; ANNODIZED (WITH REQUIRED FILMTHICKNESS AND SPECIFIED COLOUR / NATURAL) MATT FINISHEDCONFORMING TO IS: 1868-1983 FOR FABRICATION OF COMPOSITDOOR, SLIDING & CASEMENT WINDOWS, PARTITIONS, FORMEDOF BASIC SECTIONS OF ANY ISI EMBOSSED / CERTIFIED MAKEAND BRAND AS PER DIRECTION OF ENGINEER - IN- CHARGE.(PAYMENT WILL BE MADE ON FINISHED LENGTH OF THE WORK).IN 10-12 MICRON THICKNESS ANNODIZING FILM. NATURALWHITE. MOVABLE DOOR SHUTTER. Door frame. (Top & sides). 16 SUPPLYING PROFILES OF REQUIRED SECTION MADE OFALUMINIUM ALLOY EXTRUSIONS CONFORMING TO IS: 732-1983AND IS: 1285- 1975; ANNODIZED (WITH REQUIRED FILMTHICKNESS AND SPECIFIED COLOUR / NATURAL) MATT FINISHEDCONFORMING TO IS: 1868-1983 FOR FABRICATION OF COMPOSITDOOR, SLIDING & CASEMENT WINDOWS, PARTITIONS, FORMEDOF BASIC SECTIONS OF ANY ISI EMBOSSED / CERTIFIED MAKEAND BRAND AS PER DIRECTION OF ENGINEER - IN- CHARGE.(PAYMENT WILL BE MADE ON FINISHED LENGTH OF THE WORK).IN 10-12 MICRON THICKNESS ANNODIZING FILM. NATURALWHITE. MOVABLE DOOR SHUTTER. Shutter - Top Rail 17 SUPPLYING PROFILES OF REQUIRED SECTION MADE OFALUMINIUM ALLOY EXTRUSIONS CONFORMING TO IS: 732-1983AND IS: 1285- 1975; ANNODIZED (WITH REQUIRED FILMTHICKNESS AND SPECIFIED COLOUR / NATURAL) MATT FINISHEDCONFORMING TO IS: 1868-1983 FOR FABRICATION OF COMPOSITDOOR, SLIDING & CASEMENT WINDOWS, PARTITIONS, FORMEDOF BASIC SECTIONS OF ANY ISI EMBOSSED / CERTIFIED MAKEAND BRAND AS PER DIRECTION OF ENGINEER - IN- CHARGE.(PAYMENT WILL BE MADE ON FINISHED LENGTH OF THE WORK).IN 10-12 MICRON THICKNESS ANNODIZING FILM. NATURALWHITE. MOVABLE DOOR SHUTTER. Shutter - Bottom Rail. 18 SUPPLYING PROFILES OF REQUIRED SECTION MADE OFALUMINIUM ALLOY EXTRUSIONS CONFORMING TO IS: 732-1983AND IS: 1285- 1975; ANNODIZED (WITH REQUIRED FILMTHICKNESS AND SPECIFIED COLOUR / NATURAL) MATT FINISHEDCONFORMING TO IS: 1868-1983 FOR FABRICATION OF COMPOSITDOOR, SLIDING & CASEMENT WINDOWS, PARTITIONS, FORMEDOF BASIC SECTIONS OF ANY ISI EMBOSSED / CERTIFIED MAKEAND BRAND AS PER DIRECTION OF ENGINEER - IN- CHARGE.(PAYMENT WILL BE MADE ON FINISHED LENGTH OF THE WORK).IN 10-12 MICRON THICKNESS ANNODIZING FILM. NATURALWHITE. MOVABLE DOOR SHUTTER. Shutter - Lock Rail. 19 SUPPLYING PROFILES OF REQUIRED SECTION MADE OFALUMINIUM ALLOY EXTRUSIONS CONFORMING TO IS: 732-1983AND IS: 1285- 1975; ANNODIZED (WITH REQUIRED FILMTHICKNESS AND SPECIFIED COLOUR / NATURAL) MATT FINISHEDCONFORMING TO IS: 1868-1983 FOR FABRICATION OF COMPOSITDOOR, SLIDING & CASEMENT WINDOWS, PARTITIONS, FORMEDOF BASIC SECTIONS OF ANY ISI EMBOSSED / CERTIFIED MAKEAND BRAND AS PER DIRECTION OF ENGINEER - IN- CHARGE.(PAYMENT WILL BE MADE ON FINISHED LENGTH OF THE WORK).IN 10-12 MICRON THICKNESS ANNODIZING FILM. NATURALWHITE. MOVABLE DOOR SHUTTER. Shutter - Door Vertical. 20 SUPPLYING PROFILES OF REQUIRED SECTION MADE OFALUMINIUM ALLOY EXTRUSIONS CONFORMING TO IS: 732-1983AND IS: 1285- 1975; ANNODIZED (WITH REQUIRED FILMTHICKNESS AND SPECIFIED COLOUR / NATURAL) MATT FINISHEDCONFORMING TO IS: 1868-1983 FOR FABRICATION OF COMPOSITDOOR, SLIDING & CASEMENT WINDOWS, PARTITIONS, FORMEDOF BASIC SECTIONS OF ANY ISI EMBOSSED / CERTIFIED MAKEAND BRAND AS PER DIRECTION OF ENGINEER - IN- CHARGE.(PAYMENT WILL BE MADE ON FINISHED LENGTH OF THE WORK).IN 10-12 MICRON THICKNESS ANNODIZING FILM. NATURALWHITE. MOVABLE DOOR SHUTTER. Shutter - Glazing Clip 21 SUPPLYING BUBBLE FREE FLOAT GLASS OF APPROVED MAKEAND BRAND CONFORMING TO IS: 2835-1987. 5mm thick clearglass. 22 SUPPLYING EPDM GUSKET OF APPROVED MAKE AND BRAND ASPER DIRECTION OF ENGINEER IN CHARGE. Weather gasket / woolpile for door vertical. 23 SUPPLYING 125 MM. DIA ACRYLIC HANDLE FOR ALUMINIUMDOOR AS PER APPROVED MAKE & BRAND. Natural Colour 24 LABOUR CHARGE FOR FABRICATION AND INSTALLATION OFCOMPOSITE DOOR, WINDOW, PARTITIONS MADE FROMANNODIZED EXTRUDED ALLOY ALUMINIUM SECTIONS FOR THEFOLLOWING UNITS: PARTLY GLAZED PARTLY PANELLED ORFULLY GLAZED SINGLE LEAF ALUNMINIUM SWING DOOR MADEOF EXTRUDED AND ANNODIZED ALLOY ALUMINIUM SECTIONS,FABRICATION INCLUDING CUTTING TO PROPER SHAPE ANDSIZE, DRILLING AND ALIGNING, FITTED WITH HEAVY DUTYHYDRAULIC ACTION FLOOR SPING PLACED IN THE FLOOR WITHMENDING DAMAGES,WITH TOP PIN ASSEMBLY OF APPROVEMAKE AND BRAND, FITTED WITH IN BUILT LOCKINGARRANGEMENT, FLUSH BOLT, GLAZING CLIPS AND ALL OTHERNECESSARY FITTINGS, FIXTURES, ADHESIVES AND JOINERIES,CUTTING GLASS OF APPROVED MAKE TO REQUISITE SHAPEAND SIZE FITTING WITH DRY SET NEOPRENE OR EPDMGASKETING, CUTTING TO REQUISITE SHAPE AND SIZE PANELBOARD (PRELAMINATED PARTICLE BLOCK) FIXING THEM WITHARGE. Glazing clips as per drawing, specification and direction ofEngineer in charge. 25 SUPPLYING HEAVY DUTY HYDRAULIC DOUBLE ACTION FLOORSPRING ALONG WITH TOP PIN/SET OF PIVOTS CONFORMING TOIS: 6315 or any approved make as per direction of Engineer in charge.Approved brand. 26 SUPPLYING 6 LEVERS GODREJ CRYSTAL SATINE Mortice Lockwith keys including fitting & fixing complete. 27 SUPPLYING CONCEALED TYPE HEAVY DUTY PVC HEADEDALUMINIUM TOWER BOLT FOR DOUBLE LEAF DOORS AS PERAPPROVED MAKE AND BRAND AS PER DIRECTION OFENGINEER-IN-CHARGE. 300 mm long.
