|
| 1 | Excavating in Post hole (or similar holes) each n exc 0.50 cum getting out in soft/ loose soil, returning, filling in and ramming earth or brocken rubble mixed with earth around in layers not exc 25 cm watering and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified. |
| 2 | M&L for Plain cement concrete in (1:4:8) type D-2 (using 40mm graded stone aggregates) as in foundation, filling and mass concrete completeall as specified. |
| 3 | M&L for Plain cement concrete in (1:2:4) type B-1 (using 20mm graded stone aggregates) as in benching and coping, bed block, lintel upto 1.5m clear span, cills, steps, seismic and other similar band, plinth couser, string courses, lacing cources, parapet and railing upto 60cm in height, coping, kneelers, apex stones, bed plates, kerbs, water troughs and like including weathering, slightly rounded or chamfered angles and throating completeall as specified. |
| 4 | S&F circular/ rectangular pipe for posts or struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wiremesh etc) including all necessary drilling, boring or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified. |
| 5 | S&F for mild steel work of angles and omega clamps as in posts or struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wiremesh etc) including all necessary drilling, boring or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified. |
| 6 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and inclding either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging door fittings (exclusive of steel or other covering, running rails and guides) and hanging also fastening and fixing complete conforming to Fe-410-W(Gde E-250) quality-B complete all as specified. |
| 7 | Supply only powder coated (green) anticut mild steel galvanised welded wire mesh fence of size 76.2mmx12.7mm and 4mm dia fixed and binding with nut bolt or GI wire complete all as specified. |
| 8 | Fixing only anticut mild steel galvanised welded wire mesh fence, any mesh, size and type to any type of standards, rails, straining bolts etc inlcuding provisions of binding wire complete all as specified. |
| 9 | S&F for galvanised 2 strand steel barbed wire, 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining fixing to any type of standard rail straining bolts, including securing or tying at crossing with provision of galvanised mild steel wire, staples or steel pins etc (each line wire to be measured) complete all as specified. |
| 10 | S&F hot dipped galvanised iron Concertina coil with punched tape 600mm dia openable (in stretched position) and 10 meter openable length having 50 numbers of turns for every 6 m length, spring core wire (2.5mm thick) of tensile strength of 165 Kg/sqmm with tape (0.52mm thick) and weight 43.478 gm/mtr, including all fittings like fastener clip, steel lug rings, GI wireetc and fixing the same to Y-shaped angle iron with horizontal reinforced barbed tap wire stud tied with GI staple and GI clips to retain horizontal complete all as specified and directed.Note : (i) MS Angle iron frame and Barbed wire shall be measured and apid separately.(ii)The length of coil after stretching and fixing it place shall be measured for payment purpose. |
| 11 | M&L for preparation of new surfaces of steel of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
