Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 06-10-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 11-10-2025 |
| 2 | 29-09-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 06-10-2025 |
| 3 | 16-09-2025 | Tender Corrigendum | Other | 29-09-2025 |
| 4 | 16-09-2025 | BOQ Corrigendum | BOQ | 29-09-2025 |
| Sl. No. | Item Description |
| 1 | Dismantling of timber scantling in fillets, rails, posts, rafters, purlins, etc under 40sqcm in section, as in any position, complete all as specified & directed. |
| 2 | Supply, laying, and testing XLPE cables insulated screened PVC bedded galvanised steel strips or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 120 sqmm 3.5 includingtaking down old U/S complete all as specified and directed. |
| 3 | Takingdown old U/S transformer of cap 100 KVA from existing platform at family qtr sub stn and shifting the same to MES E/M store yard complete all as directed. |
| 4 | Supply, installation, testing and commissioning step down, 11/ 0.433 kv (at no load) transformer, copper wound, outdoor type complete conforming to IS :1180- part 1-2014 BIS level 02 transformer with standard fitting plateform mounted, HT 11 KV 3 Phase, LT 433 volts, 3 Phase 4 wire with off load tapings on HT side to vary secondary voltage up to +7 .5% with step +2.5% including suitable cable entry boxes on LT and bushings on HT side complete in all respects with standard accessories Dyn -11 connection of capacity 160 KVA complete all as specified ans directed. Salient features of transformer are as under:- (a) Transformer shall be oil immerse, naturally self cooled cooper wound, winding core type, MS radiator cool tank compete with first fill of transformer oil plus 5% spare oil as per IS 335 of 1980. the temperature of oil shall not rise more than 50 degree centigrade and 55 degree centgrade of winding. Transformer shall be painted with 2 coats of epoxy paint as per IS 632specification :-(i) IS Code - 1180/2026 relevent IS code.(ii) Vector group - Dyn 11(iii) Type - ONAN (iv) Conserveter tank capacity as per IS (V) Suitable size Breather assembly with sillica gel (vi) Oil and winding temperature guage(b)The folowing standard accessories shall also be provided:-(i) Rating and diagram plate(ii) earthing terminals 2 Nos (iii) Lifting lugs(iv) Thermometer pocket(v) Air release hole with plug(vi) Tap changer with locking provision(vii) Conservator with oil indicator(viii) Castors with locking provision(ix) Silica Gel breather complete(x) MS terminal box both on HT and LT site(xi) Oil terperature indicator with maximum & minimum temperature rise indicator.(xii) Plain breathing device which would not permit ingress of rain water and insects.(xiii) Drain- cum-sampling valve (3/4\"\" nominal size thread) preferably steel with plug,(xiv) Oil filling hole (1-1/4\"\" Nominal size thread) with cover (for transformers without conservator) |
| 5 | Earthing complete with galvanised steel earth plate electrode 60cmx60cm x 6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground) with top edge of plate not less than 1.5m below normalground level connecting to the GI earthing strip 32x6mm by means of bolts, nuts check nuts and washers of galvanised iron and GI Strip 32x6mm protected by provision of GI Light grade pipe of 40mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 40mm grade crushed stone aggregrate iwh 40mm thick cover of RCC (1:2:4) reinforced with PM (weight not less than 4Kg/sqmm) and frame of angle iron 25x25x6mm with lugs 02 nos and 6mm dia MS bars handle made to shape, GI Light ggrade 20mm bore pipe for watering perforated at bottom 1.75m long placed on top edge for earth platem common salt and charcoal filling, test point made out of 75x50x6mm phodphorous bronze with fixing arrangement, funnel, wire mesh and earth work in hand/ dense soil rning filling in andremoval of surplus soil to a distance not exceeding 50m all as per electrical plate no 3 of SSR 1991 Pt-I and connecting to earh test point incl testing on completion includingtaking down existing earthing all as specified and directed. |
| 6 | Aluminiumstrip 32x6 mm complete with saddles and fixing screws including taking down old U/S ones all as specified and directed. |
| 7 | Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground) with top edge of plate not less than 1.5m below normalground level connecting to the GI earth wire 4mm dia by means of bolts, nuts check nuts and washers of galvanised iron and protected by provision of GI Light grade pipe of 40mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 40mm grade crushed stone aggregrate iwh 40mm thick cover of RCC (1:2:4) reinforced with PM (weight not less than 4Kg/sqmm) and frame of angle iron 25x25x6mm with lugs 02 nos and 6mm dia MS bars handle made to shape, GI Light ggrade 20mm bore pipe for watering perforated at bottom 1.75m long placed on top edge for earth platem common salt and charcoal filling, test point made out of 75x50x6mm phodphorous bronze with fixing arrangement, funnel, wire mesh and earth work in hand/ dense soil rning filling in andremoval of surplus soil to a distance not exceeding 50m all as per electrical plate no 3 of SSR 1991 Pt-I and connecting to earh test point incl testing on completion including taking down existing earthing all as specified and directed. |
| 8 | Excavating in trenches, in any type of soilnot exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etcand getting out in complete allas specified and directed. |
| 9 | Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete allas specified and directed. |
| 10 | Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete allas specified and directed. |
| 11 | Sand cushioning below and around cable in trenches with river sand all as specified and as directed.Note:- For payment purpose only punned thickness shall be measured. |
| 12 | Supply, laying, sub class \"B\" Bricks laid dry flat transversely along the length of cable with width equal to the length of bricks over sand cushioning as protection cover of cable laid all as specified and directed. |
| 13 | Supply and fixing in replacement of 50mm bore tube \"light grade\" galvanised with all fittings and fixed complete with electric pole, laid in trenches for passing of cable all as specified and directed. |
| 14 | Supply and fixing electric water heater, storage type steel body with heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete as approved with all accessories such as safety valve, thermostate, NRV, 02 nos hot water connection piece etc. complete all as specified and directed. |
| 15 | 15mm bore galvanized \"\"Medium class\"\", with all fittings including cutting, chasing work on wall tiles at any height and all accessories are concealed in walls/roofs/floors/ceiling etc and making good distrubed surface as per existing by using cement plaster and matching existing complete all as directed. |
| 16 | Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, 15 mm dia, cast copper alloy, screwed high pressure, fancy type complete all as specified and directed. |
| 17 | Bib taps, cast copper alloy with crutch or butterlfly handle, screwed down, for iron pipe and fixed, chromium plated of size 15mm bore complete all as specified and directed. |
| 18 | Point wiring complete with 2.5 sqmm PVC insulated, FRLSH type, ISI marked, conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables with PVC casing capping medium grade including cutting, chiselling work at any height and all accessories concealed in walls/roofs floors /ceiling etc. flush mounting MS box with top bottom, side/ back wall knockout for conduit entry from any direction made out of 1.60mm thick suitable for fixing of modular top cover, blanking plates as per number of switch modules, modular switches, sockets, fan regulators, red color indicator, blank plates etc as approved coloures including 2.5 Sqmm PVC insulated multistranded FRLSH type unsheathed (Green color), single core cable with copper conductor cable as earth continuity conductor and connecting to common earth and including making good the disturbed surfaces to match with existing surface complete as specified and directed for the following:-One 15/16 amps power socket outlet point controlled by one 16 amps switch on independent board.Note: All necessary accessories such as modular box, top cover plate, blank plate, MS box, screws, washers and all modular electrical fixtures are to be used same make/brand only and shall be deemed in to included in quoted rate only. |
| 19 | Supply & fixing modular type switch 16 Amps, single pole,1 way,1 module, 240V, ISK Marked Complete all as specified and directed, |
| 20 | Modular type socket 6 A/16 Amps-2/3 Pin combined shuttered socket 2 module 240V AC ISI Marked Complete all as specified and directed |
| 21 | MCB SPN, 40 Amp rating 240 V, 10 KA breaking capacity \"\"C\"\" curve fixing in the existing MCB DB complete with connection testing and commissioning all as specified & directed. |
| 22 | MCB SP, 16 Amp rating 240 V, 10 KA breaking capacity \"\"C\"\" curve fixing in the existing MCB DB complete with connection testing and commissioning all as specified & directed. |
| 23 | Preparation of old painted surface of concrete or surfaces of any description and applying two coat of aluminium paint over roof surfaces over 10 cm girth or width, not otherwise described, all as specified and directed. |
| 24 | Dismantling of wall and ceiling boards including ceiling framework such as fillets, rails, posts, rafters, purlins, channel, etc. (fibre, pulp, ubsykatuin, etc) or insulation boards/slabs/blankets any thickness, all as specified and as directed. |
| 25 | PVC wall lining consisting of 5mm thick plain colour pvc sheet inclusive of solvent cement and fixing at site on pvc frame as per specifications and drawing all as specified and as directed. |
| 26 | 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing solvent screws etc as required on to wall to make PVC Frame as per specification and drawing all as specified and as directed. |
| 27 | Demolition of brick work built in cement mortar including all quions, arches , pillars etc all as specified and as directed. |
| 28 | Brick work with sub class \"B\" bricks, straight or curved on plan exc. 6 mtr mean radius built in CM 1: 6 all as specified and as directed. |
| 29 | -Ditto- all as per Srl iterm No. 28 here-in-before, but except bricks. |
| 30 | Taking down cement plaster from brick or stone walls incl racking out joints hacking for key, scrubbing down with water etc. |
| 31 | Rendering 15mm thick cement plaster with cement mortar(1:4) on fair faces of brick work or concrete surfacesand using water proofing compound to be measured separately finished even and smooth without using extra cement all as specified and directed. |
| 32 | Rendering 10 mm thick cement plaster with cement mortar(1:6)on other than fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement all as specified and directed. |
| 33 | Applying 2mm thick wall care putty on internal walls all as specified directed. |
| 34 | Rendering 5mm thick cement plaster with cement mortar(1:3) on concrete surface as in ceiling finished even and smooth without using extra cement, complete all as specified and as directed. |
| 35 | Supply only Liquid water proofing compound all as specified and as directed. |
| 36 | Complete removal of exising treatment of old surfaces of walls all as specified and as directed. |
| 37 | Complete removal of exising treatment of old surfaces on ceiling all as specified and as directed. |
| 38 | Preparation of new plastered and unplastered surfaces of walls and applying two coat of oil bound distemper over priming plastered and other surfaces with alkali resistant priming paint all as speicfied and directed. |
| 39 | Preparation of old plastered surfaces on walls and applying two coats of oil bound distemperall as specified and directed. |
| 40 | Preparation of new plastered surfaces of walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resistance as per IS 15489 : 2004, alkali/fungal/dirt resistance with silicon additives @ 1.43 ltr/10 Sqm incl a coat of exterior primer applied @ 0.90 ltr/10 Sqm complete all as specified and as directed. |
| 41 | Preparation of old plastered surfaces of walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resistance as per IS 15489 : 2004, alkali/fungal/dirt resistance with silicon additives @ 1.43 ltr/10 Sqm complete all as specified and as directed. |
| 42 | Preparation of old decorated surface and apply two coat of Oil bound distemper on ceiling all as specified and as directed. |
| 43 | Preparation of newplastered surfaces and applying two coats of oil bound distemper white/tinted over priming plastered and other surfaces with alkali resistant priming paint on ceiling complete all as specified and directed. |
| 44 | Repairs to balcony/Facia and soffit of chajjas etc by taking down oldrendering 15 to 20 mm thick to match with the existing thickness in CM 1:3 and hacking clearly the edges and corners smooth and rounded for new plastered area exceeding 30sqm cm in width or girth incl preparation of surface and two coat of cement base paint/apex as reqd over one coat of primer/scaffolding work upto height of 7.0 m complete all as specified and directed.complete all as specified. |
| 45 | Demolition of cement concrete (reinforced) (reinforcement cut as required to facilitate demoltion complete all as specified and directed. |
| 46 | Reinforced cement concrete (nominal mix ) type B1 1:2:4 (using 20mm grade crushed stone aggregatge) for Chajjas/Bacony/Landing work/kitchen Slab if any all as per specified. |
| 47 | Mild steel bars 10mm dia TMT Bars and over cut to lengthbent to shape required including cranking, bending sprially for hopping for columns, hooking ends and binding with and includig mild steel wire not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 48 | Formwork to sides and soffits/faccia of floor or roof beams, beam haunchings, girders, bressummers, lintels, chajja, cantilevers, shelves including sup- ports, overhangs, etc. complete all as specified and directed. |
| 49 | Reinforced cement concrete (nominal mix ) type B1 1:2:4 (20mm grade Crushed stone aggregatge) Slabs supported on walls, Lintel beams, plinth beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified and directed. |
| 50 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar worknot exceeding 200mm thick (Vertical , Horizontal or sloping)sidesincluding sup- ports, overhangs,for fair finished surface of concrete etc. complete all as specified and directed. |
| 51 | Demolition of Stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons,walls etc, complete all as specified and directed. |
| 52 | Vitrified ceramic light shade tiles10mm thick (square /rectangular) polished, area of each tile n.exceeding 0.36 sqm laid as in floors etc, set and jointed in neat cement slurry and pointed in white/coloured cement to match in light shade including 15mm thick screed bed/base in cement and sand mortar 1:4, complete all as specifiedand directed. |
| 53 | Vitrified ceramiclight shade tiles 10mm thick (square /rectangular) polished, area of each tile n.exceeding 0.36 sqm set as in skirting etc, set and jointed in neat cement slurry and pointed in white/coloured cement to match in light shade including 10mm thick rendering in cement and sand mortar 1:4, finished even and fair to recieve tiles, all as specified and as directed. |
| 54 | Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc.set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15 mm thick screed bed in cement and sand mortar 1:4,complete all as specified and directed. |
| 55 | Glazed ceramic coloured tiles 450x350x 7mm thick on vertical surfaces such as skirting, dados and risers to steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering in CM 1:4 on other than fair faces of brick work finished even and fair to receive tiles, complete all as specified and directed. |
| 56 | Taking down chowkhat or frames of door/ window with shutters (Without taking off shutter from the frame) exc 1.50 m and n.exc 4.00 Sqm each, complete all as specified and directed. |
| 57 | Taking down chowkhat or frames of door/ window with shutters (Without taking off shutter from the frame) exc 1.50 Sqm complete all as specified and directed. |
| 58 | Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 59 | Powder coated aluminium anodised door shutters(minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 kg/m includingnecessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed. |
| 60 | Powder coated anodised aluminium window / ventilator( glazed / gauged skeleton shutter ), (minimum thickness of powder coating 50 micron), side hung type without sash bars, aluminium sections weighing 0.55 kg/m includingnecessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.) hinges type B-21 100mm long (2 No. ) suitable handle (1 No.) complete all as specified and as directed. |
| 61 | Door closer hydraulically regulated, aluminium extruded section body designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed in repairs complete all as specified and as directed. |
| 62 | Galvanised steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed all as specified and directed. |
| 63 | Glazing with sheet5.5mm thick, ordinary quality and glazing with glazing pins in squares not exceeding 0.5 Sqm in each pane, complete all as specified and directed. |
| 64 | Glazing with sheet5.5mm thick, ordinary quality and glazing with glazing pins in squares exceeding 0.5 Sqm in each pane, complete all as specified and directed. |
| 65 | Floor door stopper 140mm overall length of cover plate of aluminium alloy body and tongue,nodised,with hard drawn steel spring,fixed in bottom body of door complete all as specified and directed. |
| 66 | Curtain rods 20mm dia mild steel, Chromium plated fixed with brackets, stops rollers in repairs etc all as specified and as directed. |
| 67 | Demolition of concrete in ground floor and paving n.exc 15cm thickness (below or above ground level complete all as specified and directed. |
| 68 | Plain cement concrete type B-1, 1:2:4 ( using 20mm graded crushed stone aggregate), 50 mm thickas in plinth protection laid in bays not exceeding 2 Sqm each and finishing even and smoothontop without using extra cement with 6mm wide joints throughout the thickness of plinth protection in concrete bays and in between the walling and plinth protection, complete all as specified and directed. |
| 69 | Bituminous mastic filling, with 85/25 or 95/10 grade bitumen and coarse sand mixture 1:3 by weight (comprising of one part of heated bitumen and 3 parts of sand), 8cm x8cm filling the joints with mastic at the junction of bays of plinth protection to vertical surfaces all as specified and directed. |
| 70 | Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed. |
| 71 | Rotational moulded polyethylene water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) (White in Colour and threelayered) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete all as specified. |
| 72 | Taking up or down steel water tubing and connections 20mm bore all as specified and as directed. |
| 73 | Taking up or down steel water tubing and connections 15mm bore all as specified and as directed. |
| 74 | 20mm dia Mild steel galvanized steel tubing medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete includingcutting chasis as reqd all as specified and as directed. |
| 75 | 15mm dia Mild steel galvanized steel tubing medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete including cutting chasis as reqd all as specified and as directed. |
| 76 | 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed high pressure with crutch or butterfly handle fixed in repairs all as specified and as directed. |
| 77 | 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed high pressure with crutch or butterfly handle fixed in repairs all as specified and as directed. |
| 78 | Ball valve hight pressure PTMT with epoxy coated aluminium rod & high density plastic ball 20mm dia bore. |
| 79 | Vitreous China floor mounted Single piece wash down water closet pan (pedestal pattern)(size 370mm x 670mm x 720mm) with UF soft close slim seat cover,Hinges, Dual Flush cistern fitting, fixing accessories and set with \"S\" trap size 300mm including connection to drain (or outgoing pipe), antisyphonage pipe, etc.. complete fixed in repairs complete all as specified and directed.Make-Jaquar (Lyric) Cat Part No. LYS-WHT-38851S300UFSMNor its equivalent cat part of make specified in list make, as approved by GE. |
| 80 | Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.2 meter long flexible spirochrome flex tube and ABS wall hook including making connections and fixed in repair in position complete in all respect as specified.Make-Jaquar Cat part no. ALD-573 or its equivalent cat part of make specified in list make, as approved by GE. |
| 81 | Toilet paper holder with flap recessed type stainless steel Complete all as specified and directed.Make-Jaquar cat part no. AQN-7753 or its equivalent cat part of make specified in list make, as approved by GE. |
| 82 | Vitreous china wall hung wash basin with fixing accessories, white, flat back, size 550mm x 440mm x 185mm full pedestal including 15mm bore CP Central hole Basin Mixer with Popup waste system with 450mm long braided hoses for mixing hot and cold water screwed down for iron pipe including 32mm dia waste coupling,waste pipe, cutting for and pinning in ends of brackets or erecting standporcelain stopper a pair of CI brackets fixed in repair complete all as specified and directed. |
| 83 | Vitreous China urinal with CP spreader Chrome finish hole and fixing accessories Half stall type (back or corner wall type)(size 355mm x 340mm x535mm) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; including PVC Connection,waste pipe and coupling. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) fixed in repairs complete as approved by GEas specified and as directed. |
| 84 | Brass Chromium Plated stainless steel towel rail 20mm dia \"D\" type 60 cm long between flanges in repairs |
| 85 | PVC connection 15 mm size with PTMT NUTS 600mm long in repairs all as specified and as directed. Make- Jainko, Prayag, Hindware, Parryware. |
| 86 | CP angle valve/concealed stop cock of cast copper alloy (ISI Marked) chromium plated fancy type screwed down high pressure with capstain head screwed both ends for iron pipe 15mm bore including fixing in repairs complete all as specified and directed.Cat Part No-SOL-6053 of Jaquar or its equivalent cat part of make specified in list make, as approved by GE. |
| 87 | Bib taps (Long body) for 15mm bore dia of pipe, fancy type chromium platedwith crutch or butterfly handle, screwed down for iron pipe or for brass ferrule and fixed in repairs complete all as specified and directed.Cat Part No-CON-107KN of Jaquar or its equivalent cat part of make specified in list make, as approved by GE. |
| 88 | CP grating with or without hole 100mm dia fixed in repairs all as specified and as directed. |
| 89 | Brass Chromium Plated Soap dish any type fixed to plugs with chromium plated brass screws fixed in repairs, |
| 90 | 600mm x 450mm size bevelled edge mirror with border, selected quality 5mm thick glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers fixed in repairs complete all as specified and directed. |
| 91 | Corner Glass shelf 600mm long consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cmlong with brackets in repairs all as specified and as directed.Make-Jaquar cat part No CAN-1173 or its equivalent makes as per list of makes as approved. |
| 92 | Glass shelf of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cmlong with brackets in repairs all as specified and as directed.Make-Jaquar cat part No AKP-35771P or its equivalent makes as per list of makes as approved. |
| 93 | Taking down eaves gutters and rain water pipe , soil and waste pipe (any size or pattern ), including all fittings, heads , shoes bends , swan-necks etc all as specified and directed. |
| 94 | 110mm bore PVC SWR Type-B ( pressure not less than 6 kg /cm2) pipes single socket in any length with rubber ring joints laid in floors or trenches etc., complete all as specified and directed. |
| 95 | 75mm bore PVC SWR Type-B ( pressure not less than 6 kg /cm2) pipes single socket in any length with rubber ring joints laid in floors or trenches etc., complete all as specified and directed. |
| 96 | PVC (SWR)bend 110 mm dia any radius with oval access doorall as specified and directed. |
| 97 | PVC (SWR)bend 75 mm dia any radius with oval access door all as specified and directed. |
| 98 | PVC SWR 110mm dia Type-B ( pressure not less than 6 kg /cm2) pipes in any length fixed to walls with PVC/MS holder or clamps and conforming to IS-1729 complete all as specified and directed. |
| 99 | PVC SWR 75mm dia Type-B ( pressure not less than 6 kg /cm2) pipes in any length fixed to walls with PVC/MS holder or clamps and conforming to IS-1729 complete all as specified and directed. |
| 100 | PVC (SWR)junction single (single T) equal or unequal 110 mm diawith oval access door all as specified and directed. |
| 101 | PVC (SWR)junction double (Double Y) equal or unequal ordinary or inverted with spigot or socket branch with Oval Access door all as specified and as directed. |
| 102 | PVC SWR vent cowl110 mmcomplete all as specified and as directed. |
| 103 | PVC SWR vent cowl75 mmfixed in complete all as specified and as directed. |
| 104 | PVC (SWR)75 mm dia floor trap plain with grating including jointing with solvent cement fixed in repairs, all as specified and directed. |
| 105 | Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power)complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings and including making good the disturbed surfaces to match with existing surface and colour shade with putty and white cement at necessary holes for smooth finishing complete all as specified and directed complete all as specified anddirected. |
| 106 | Materialand labour for point wiring complete with 1.5 sqmm PVC insulated, FRLStype, ISI marked,conforming to IS-694/1990 unsheathed,multistranded,single core, copperconductor cable 1100 volts grade colour code cablesdrawn through and including PVCConduit 20 mm dia medium grade andincluding cutting, chasing work at any height and all accessories are concealedinwalls / roofs / floors / ceiling etc. metal flush boxwith top,bottom,side/back wall knockout for conduitentry from any direction made out of 1.60mm thick suitable for fixing ofmodular top cover plate as per numbers of switch modules for modular switches,sockets,fan regulators,red colour indicator, blank plates etc as approved colouresandincluding 1.5 Sqmm PVC insulated multistranded FRLStype unsheathed(Green colour),single core cable with copper conductor cable as earth continuity conductor andconnecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour coat including providingputty and white cementfor smooth finishing of existing surfacecomplete all as specified and directedfor the following:- |
| 107 | One light point/fan point controlled by one switch. |
| 108 | one 3 Pin 5 amps socket point controlled by one 5 amp switch on independent board. |
| 109 | one 3 Pin 5 amps socket point controlled by one 5 amp switch on same board. |
| 110 | Materialand labour for point wiring complete with 2.5 sqmm PVC insulated, FRLStype, ISI marked,conforming to IS-694/1990 unsheathed,multistranded,single core, copperconductor cable 1100 volts grade colour code cablesdrawn through and including PVCConduit 20 mm dia medium grade andincluding cutting, chasing work at any height and all accessories are concealedinwalls / roofs / floors / ceiling etc. metal flush boxwith top,bottom,side/back wall knockout for conduitentry from any direction made out of 1.60mm thick suitable for fixing ofmodular top cover plate as per numbers of switch modules for modular switches,sockets,fan regulators,red colour indicator, blank plates etc as approved colouresandincluding 2.5 Sqmm PVC insulated multistranded FRLStype unsheathed(Green colour),single core cable with copper conductor cable as earth continuity conductor andconnecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour coat including providingputty and white cementfor smooth finishing of existing surfacecomplete all as specified and directedfor the following:-(Note :- All necessary accessories such as modular steel box, top cover plate, blank plate, screws, washers and all modular electrical fixtures are to be used of same make/brand only and shall be deemed in to included in quoted rate only) |
| 111 | One 15 amps power socket outlet point controlled by one 16 amps switch on independent board. |
| 112 | Modular type switch 6 Amps, single pole, 1way,1 module,240V, ISI Markedcomplete all as specified and directed. |
| 113 | Modular type switch 16 Amps, single pole,1 way,1 module,240V, ISI Marked Complete all as specified and directed. |
| 114 | Modular type socket type 6 Amps- 2/3 Pin combined 2 module,240V,ACISI Marked Complete all as specified and directed. |
| 115 | Modular type socket 6 A/16 Amps -2/3 Pin combinedsocket 2 module 240V ACISI MarkedComplete all as specified and directed. |
| 116 | Ceiling rose, 3 terminal ,PVC/polycarbonate body ISI marked, complete all as specified and directed |
| 117 | Fan regulator modular type electronic, stepped type(01 to 4/5) 100 to 120 Volts, 240Volts,AC,ISI marked complete all as specified and directed. |
| 118 | Supply & fixing in repairsLED light fitting 20W, 220V, AC general purpose surface and wall mounted LED batten with aluminium housing integrated electronic driver 20 watt, 4 feet incl copper conductor cable of suitable size from tube light to ceiling rose complete all as specified and directed. |
| 119 | Supply & fixing in repairs LED light fitting 10W, 220V, AC general purpose surface and wall mounted LED batten with aluminium housing integrated electronic driver 2 feet incl copper conductor cable of suitable size from tube light to ceiling rose complete all as specified and directed. |
| 120 | Supply and fixing in replacement LED luminaire 600mm x 600mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver and all accessories suitable for roof ceiling including connecting up with drive two core flexible copper conductor complete all as specified and directed. |
| 121 | Supply and fixing in repairs LED light fitting 1x9W/1x10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. |
| 122 | Supply and fixing in repairs sheet metal enclosure double door type for DBs single pole and neutral 8 way 240 V with 200 Amp bus bar including blanking plates where required . |
| 123 | Supply & fixing and in repair MCB SP 6 to 32 Amps 10 KA,\"C\" series,AC,240Volts,50Hz , ISI marked complete all as specified and directed. |
| 124 | Supply & fixing and in repair MCB SPN 40 to 63 Amps 10 KA,\"C\" series,AC,240Volts,50Hz, ISI marked complete all as specified and directed. |
| 125 | Supply & fixing in repair sheet metal enclosure double door, 240 volts AC, VTPN distribution board 4 way for flush mounting with 200amps copper busbar, neutral bar, earth bar suitable for MCCB incomer of rating upto 125Amps and MCB SP/DP as outgoing and complete connectiong cable links with top and bottom removable gland plates with IP 54 DBs protection incl S & F MCCB 125 amp, TPN, 16 KA, 415 volt as incomer and 04 Nos MCB, SP, 63 Amp, C series as out going complete including making good the disturbed surfaces to match with existing surfaces and colour coat all as specified and as directed. Make:- Indo asian cat No. 811888 equivalent to Havells/L&T/Legrand as approved. |
| 126 | Supply and fixing in repair suitable for flush mounting sheet steel enclosure with metal clad plug and socket including MCB SP 20 Amps, 10KA \"C\" series, 230 Volts complete all as specified and directed (For AC Point) |
| 127 | Ceiling fan brushless direct current motor (BLDC) complete with blades, down rods and accessories, 230V, 1200mm sweep Min air delivery 210CFMwith serviece value 6.00 BEE five star rated incl taking down old UNSV celling fan and depositing to MES store yard complete all as specified and directed. |
| 128 | Exhaust fan, steel body AC single phase 230Volt size 300mm sweep with blades and frame and louvers incl taking down old UNSV exhaust fan and deposited to MES store yard complete all as specified and directed. |
| 129 | Electric water heater storage type, capacity 25 litres and heating element 2KW, BEE 5 Star rated complete with all accessories such as a safety valve, thermostate, NRV, connectionto pipes of GI/PVC and necessary electric connections etc including taking down old UNSV water heater and depositing to MES store yard complete all as specified and directed. |
| 130 | Sub main wiring complete with 2 run of 6 sqmm single core copper conductor (ISI marked) cable1100 volts grade,FRLS type, PVC insulated, unsheathed,flexible,multi strandedcolour coded cables drawn through and including rigid PVC conduit of size 25 mm dia medium grade with all connected accessories such asBend,Tee,Elbow,Short peices etc concealed in wall/roofs/floorsand including one run of 6 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade,FRLS type as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surfaceand colour coat and applying putty including cutting and cheasing and complete all as specified and directed. Note : - Two run of 6 sqmm single core copper conductor cable and one run of6 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit. |
| 131 | Sub main wiring complete with 2 run of 2.5 sqmm single core copper conductor (ISI marked) cable1100 volts grade,FRLSH type, PVC insulated, unsheathed,flexible,multi strandedcolour coded cables drawn through and including rigid PVC conduit of size 25 mm dia medium grade with all connected accessories such asBend,Tee,Elbow,Short peices etc concealed in wall/roofs/floorsand including one run of 2.5 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade,FRLSH type as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surfaceand colour coat and applying putty including cutting and cheasing and complete all as specified and directed. Note : - Two run of 2.5 sqmm single core copper conductor cable and one run of2.5 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit. |
| 132 | Supply and fixing PVC Conduit 20 mm dia medium grade and including cutting, chassis work at any hight and all accessories are concealed in walls/roofs/floors/ceiling etc. with all fitting such as bend tee, junction box etc. complete all as specified and directed. (For conferance table wiring, telephone and sound system cable in floors) |
| 133 | Surface excavation n.exc 30 cm deep and avg 15cm deep and getting out in any type of soil all as specified and as directed. |
| 134 | Hardcore of guage n. exc 63mm but n. exc. 100mm of broken stone or boulders deposited spread and levelled in layers n exc 15cm thick, watered and rolled/rammed to a true surface all as specfied and directed. |
| 135 | 75mm thick Plain Cement Concrete as in sub base type C2 (1:3:6) (using 40mm graded crushed stone aggregates) complete as specified. |
| 136 | Pre-polished factory Made Desinger tiles(Heavy duty tiles) of size 300mm x300mm x15mm thick (Make, colour and pattern as approved by GE) with grey cement and pigment jointed and pointed with cement slurry and grey cement over and incl 20mm thick screed bed in CM 1:4 to match the existing shade of tiles all asspecified and as directed. |
| 137 | Plain Cement concrete Type B-1, 1:2:4(using 20mm graded Crushed stone aggregate) for protecting interlocking tiles, rounded or chamfered on edges etc complete all as specified. |
| 138 | GI snap grid frame work (Grid size 600x600mm) with powder coated GI angle of size 25x25x3mm fixed along wall perimeter, main runner \"T\"of size 25x40x3mm , secondary runner \"T\" of size 25x30x3mm suspended with 3mm GI wire @ 1200mm c/cof ceiling including 4mm thick pre-laminateddesigner ceiling boards fixed with fasteners of adjustable guide hanger including clips/MS fitments to hold the panels, complete all as specified and as directed. |
| 139 | Dismantling plain or corrugated steel sheeting, any guage, thickness, roof covering, complete all as speciified and directed. |
| 140 | Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl ridge all as specified and directed. |
| 141 | Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl ridge all as specified and directed. |
| 142 | Dismantling structural steel work including doors, gates but excluding framed truss etc all as specified and directed. |
| 143 | Structural steel work as in roof trusses (framed), trussed purlins, crane gantries, rails and fastening and heavy brackets (Beam, tee, angle, channel or hollow steel section) including distance pieces, cleats etc confirming to Fe-290-W (Gde-E-165) quality B complete all as specified. |
| 144 | GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste in repairs in patches n exc 5 sq. m each, including taking down old and jointing new to old as required complete all as specified and directed. |
| 145 | Granite (of any type) work 20 mm thick (table rubbed and polished) in steps of staircase, jambs, pillars, and cooking platform (Single Piece of slab for cooking Plateform) incl Dado/skirtingand like in cement mortar (1 :4) including pointing in white cement (1:2) using marble dust with admixure of pigment to match with shade of granite including 15mm thick screed of CM 1:4 all as specified and as approved by the GE. (Note : A hole will be made in slab for Gas pipe) |
| 146 | 15mm dia Mild steel galvanized steel tubing medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed. |
| 147 | Replacement of Cabinets of PVC Solid board (wooden texture) (in Mess kitchen and Bar) of various size as per site requirements, including partition, shelves and drawers with brass sliding rails, channels, door handles, door catchers, overall cabinet internally and externally made with both side PVC laminated termite proof board, 18/19 mm thick, ISI marked including PVC kitchen/cup board frame of size 18mmx63mm made out of 18mm thick PVC pre-laminated board coloured and frame shall be fixed with 50mm long steel screw inside using drilling machine and plastic fasteners, having following specifications. (i) Outer frame made six 50mm x47mm with same board.(ii) Shutters both side PVC laminated termite proof board, 18/19 mm thick having continus piano stainless steel hinges of 30mm flap width with one Nos brass handle of 100mm including brass door catcher of not less than 50mm size in each shutter. (iii) Drawers made of both side PVC laminated termite proof board, 18/19mm thick including 100mm brass handle at fromt and two skiding rails at sides in each drawer. (iv) A glass panel is custom-fit to the size of the PVC cabinet shutter frame It will be prefered as per site requirement.(v)All cabinets, drawers, frames, partitions and boards shall be fixed-at site with brass machine screws and PVC plugs of suitable sizes.Note:(a) Only front face/area i.e dimensions (Length and Width) at site, Shall be measured and entered in MB irrespective of Nos of partition, sides or drawers for payment pourposes. Cost of all partitions as required at site shall also be deeemed to have included in quoted rates and nothing extra is admissible on this account.(b) Different No of partitions and drawers may be as per site requirement with out any extra cost. (c) All labour and mateial cost shall be deemed to be included in quoted rate. |
| 148 | Preparation of new steel and iron surfaces exceeding 10cms width or girth and applying two coats of synthetic enamel paint over one coat or red oxide zinc chrome primer complete all as specified and as directed. |
| 149 | Plain cement conctete 1:3:6 type C-2(using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete All as specified and as directed. |
| 150 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in stone concrete block or slab walls, complete all as specified. |
| 151 | Chromium Plated stainless steel Tower Ring 150mm dia fixed with chromium plated brass screws and plastic cleats as in repairs all as specified and as directed Make jaquar, Cera, Hindware, parryware. |
| 152 | Sheet metal enclosure double door type for DBs single pole and neutral 12 way 240 V with 200 Amp bus bar including blanking plates where required all as specified and as directed. |
| 153 | Supply and fixing in replacement down light fitting recessed mounted round type with engineered plastic housing and white powder coated finish of 12 watt, 220 volt AC with all accessories suitable for roof ceiling including connecting up with driver two core flexible copper conductor complete all as specified and directed Make - Bajaj Cat No BPSLR 12 LED WH RD SD or its equivalent in Havells, Crompton, Wipro as approved by GE. |
| 154 | LED Bollard light fitting 9 Watt, 220V, AC outdoor type with decorative bollard with opal acrylic diffuser for 360 degree indirect light IP 66 protection with impact and corrosion resistant complete with driver mounted on floor/PCC foundation by means of nuts, bolts grouting on foundation etc. incl connection with copper conductor cable of soil and suitable size PCC foundation complete all as specified and directed.Make- Bajaj cat no. BGBOM 605 9W LED WH or equivalant in Phillips, Crompton as approved by GE. |
| 155 | Supply, laying, jointing and testing XLPE insulatedarmoured, heavy duty electric cable with aluminium conductor, 1100 Volt grade, cross sectional area 4 sqmm 2 core including necessary cable lugs, insulation tape etc complete all as specified anddirected. |
| 156 | Double walled corrugated (DWC) Pipe of size 40mm/30mm (OD) including snap fit coupler conforming to IS 14930(Pt-II) for protection of cable in underground complete all as specified and directed.Make - SFMC,Astral,Supreme as approved. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
