|
| 1 | REPAIRING OF PUMP HOUSE |
| 2 | Stripping of wornout plaster and raking out joints of walls ceiling etc. upto any height and in any floor including removing rubbish within a lead of 75 mtr as directed |
| 3 | Sand filling in foundation or plinth in layers not exceeding 15 cm as directed and consolidatingthe same by thorough saturation with water and ramming complete includinghe cost of supply of sand. (b) With local Sand, Do by fine sand. |
| 4 | Ordinery cement concrete (mix 1:2:4) with graded stone chips(20 mm nominal size) excluding shuttering and reinforcement, if any in ground floor as per relevent I.S. code. |
| 5 | (d) With local hard black stone variety chips(crusher broken) |
| 6 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners, as directed and racking out joints or roughening of concrete surface including throating, nosing and drip course as necessary at ground floor. |
| 7 | i) with (1:4) cement morter ii) 10 mm thick plaster |
| 8 | iii) with (1:6) cement morter ii) 20 mm thick plaster |
| 9 | Neat cement punning about 1.5 mm. thick in wall dado,floor, drain, door and window sill etc. complete. |
| 10 | Artificial stone in floor, dado, staircase etc. with cement concrete (4:2:1) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (2:1) including smooth finishing and rounding off corners and including application of cement slurry before flooring works, using cement @1.75 kg./sq.m. all complete including all materials and labour. (a) 25 mm. thick artifical stone. |
| 11 | Single brick flat soling of picked Jhama bricks including ramming and dressing bed to proper level and filling joints with powdered earth or local sand. |
| 12 | Brick work with 1st class bricks in cement mortar (1:6) (b) In super structure ground floor |
| 13 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary. (b)On steel or other metal surface: With other than hi-gloss two coats ii) Two coats (With any shade except white ). |
| 14 | Priming one coaton steel or other metal surface with synthetic enamel / oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 15 | Applying decorative cement based paint of approved quality after preparing the surface including scraping the same throughly (plastered or concrete surface) as per manufactures specification in G.Floor (b) Two Coats. |
| 16 | Painting block letters of digits in black japan or any approved paint as per direction |
| 17 | Supplying, fitting and fixing asbestos cement / polythene make rain water down pipe (75 mm dia) in position with jointing materials including cutting holes in masonary / concrete structure and mending good damages. |
| 18 | REPAIRING OF WTA |
| 19 | Earthwork in excavation of foundationtrenches or drains in all sorts of soil (including mixed soil but excluding laterite and sand stone), including removing, spreading or stacking the spoils, as directed and including trimming the sides of trenches, leveling, dressing and ramming the bottoms, bailing or pumping out of water etc. as required complete.Depth of excavation not exceeding 1.5 metre (not required shoring). |
| 20 | Earthwork in excavation of field trenches as per design section and alignment for laying of pipe lines (PVC , RCC, ACP etc.) upto a depth of 1500 mm all sorts of soil including removing spreading or stacking extra earth as directed . The item includes necessary trimming the sides of trenches levelling dressing and ramming the bottom as required complete. |
| 21 | Sand filling in foundation or plinth in layers not exceeding 15 cm as directed and consolidatingthe same by thorough saturation with water and ramming complete includinghe cost of supply of sand. (b) With local Sand , Do by fine Sand. |
| 22 | Single brick flat soling of picked Jhama bricks including ramming and dressing bed to proper level and filling joints with powdered earth or local sand. |
| 23 | Ordinery cement concrete (mix 1:2:4) with graded stone chips(20 mm nominal size) excluding shuttering and reinforcement, if any in ground floor as per relevent I.S. code. |
| 24 | (d) With local hard black stone variety chips(crusher broken) |
| 25 | Hire and labour charges for shuttering with centreing and necessary staging upto 4 metre using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams,columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor). 25 mm. to 37.5 mm. thick wooden shuttering. |
| 26 | Brick work in cement mortar (1:6) with first class kiln burnt bricks including racking out joints, scaffolding and other incidental works etc. complete. (a) In foundation and plinth |
| 27 | 12.5 cm. thick 1st class brickwork in cement mortar (1:4) in ground floor including, scaffolding, racking out joints etc. complete. |
| 28 | Earth work in filling in trenches after laying pipe lines (PVC, RCC, ACP etc.) with good earth obtained from excavation of field trenches in layers not exceeding 225 mm including watering and ramming etc. layer by layer complete |
| 29 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners, as directed and racking out joints or roughening of concrete surface including throating, nosing and drip course as necessary at ground floor. b) with (1:4) cement morter . 15 mm. thick plaster. |
| 30 | Neat cement punning about 1.5 mm. thick in wall dado,floor, drain, door and window sill etc. complete. |
| 31 | Labour Charges forfitting, fixing of following M.S.pipes and accessories (to be supplied departmentally) including transportation of the same cutting, threading, jointing and making leak-proof threaded / flanged joint at site, by using socket / rubber insertion, nuts and bolts etc. maintaining proper alignment and level - all complete - as per direction of Engineer-in-Charge. |
| 32 | xxvii) 150mm. dia. C.I. sluice valve. |
| 33 | (iii) 150 mm. dia. M.S. screwed boss flange |
| 34 | Laying of P.V.C. pipes of different diameters within field trenches in curve / straight line using P.V.C. fittings, viz. Bend, Tee, Reducer etc. and making leak-proof joints with couplers after roughening the surface with wire brush and emery paper and applying solvent cement (The rate is inclusive of transport of pipes, fittings and solvent cement to be supplied by Deptt.) all complete as per direction of Engineer-in-Charge. |
| 35 | i) 110 mm dia |
| 36 | Labour charge forfitting,fixing 150mm. Dia. Alfa-AIfa valve /110 mm dia Alfa-Alfa /Flap valve with 160mm. dia. P.V.C. riser pipe with the help of flanged P.V.C. tail-piece by joining the P.V.C. End of Tail-piece and riser pipe with coupler and flanged end of Tail-piece and Alfa-Alfa valve with rubber insertion, nuts and bolts etc. complete. |
| 37 | Labour charge forfitting,fixing 200 mm x 200 mm x 160 mm, 140 mm x 140 mm x 160 mm, 110 mm x 110 mm x 160 mm PVC Tee with 150 mm dia. M.S. extension piece by using PVC tail piece. |
| 38 | (vii)110 mm X 110 mm X 160 mm.dia. P.V.C. Tee |
| 39 | Labour charge forfitting,fixing 160 mm dia P.V.C. riser pipe with 150 mm dia M.S. 90 degree bend by using P.V.C. tail piece. |
| 40 | Extra rate for carrying the materials by head load over the initial carrying of materials by truck or other vehicles. @ 4 % on works value of ( Item No 2.03 to 2.10 & 2.12 to 2.19 ). |
| 41 | INTERNAL WIRING |
| 42 | Supplying, fitting & fixing M.S. clmp made of 10 mm x 6 mm. & above 250 mmupto 350 mm length flat bend bar & bifurcated fixed in wall with cement concrete with stone chips (1:2:4) as per direction forfixing of pump controller. |
| 43 | Supplying and Drawing 1.1 KV single core stranded \"FR\" PVC insulated& unsheathed single core stranded copper wire (approved make) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. Connection as required4 x 84 / 0.3 (6 sq.mm) (Meter to pump controler) |
| 44 | Supply & fixing E.I. danger board on wall(b) 20 cm x30 cm. (8\" x 12\") |
| 45 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S &F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the groundlevel as below:By ISI-Medium GI pipe |
| 46 | Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required. |
| 47 | Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. Solid GI wire No. 8 SWG |
| 48 | Supplying fitting and fixingsheert steel main switch on flat iron frame on wall 240 V DP with fuse on LN 15/16 Amps. (Havells make) . |
| 49 | Wiring in 1.1 KV grade 2 x 36 /0.3(2.5 sqmm) single core standerd \"FR\" PVC insulated and unearthed copper wire ( Make KDK/phenolex ) with 1.1 KV grade 1X 22 /0.3 (1.5 sq. mm ) single core standerd \"FR\" PVC insulated wire as ECC in suitabe size PVC casing capping ( Precisin make including necessary fitting ) from meter loop connection to main switch and main switch to different switch board. |
| 50 | Supplying & Fixing angular button holder (Anchor) or 75 mm dia PVC round block /round bakelite on wall /Ceiling. |
| 51 | Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire (approved make) in suitable size PVC casing-capping (Precision make) [for horizontal run & ceiling portion] and partly in 19mm bore, 3mm thick polythene concealed pipe [for vertical run embedded in wall only], with 1x22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathedcopper wire for ECC, incl. necy. PVC clips, fittings etc. tocopper wire for ECC, incl. necy. PVC clips, fittings etc. to light/fan/call bell points with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall incl. necy. connectionsand making earthing attachment and mending good damages tobuilding works (Avarage run 5m). |
| 52 | Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core standard FR PVC insulated & unsheatged copper wire (approved make) in suitable size PVC casing -caping (Precision make)with 1x22/0.3 (1.5 sq.mm.) for ECC including necessary fittings to 5 Amps. 3 pin flash type plug socket with piano key type switch (Anchor make)with earthing fixed on board with bakelite top cover. |
| 53 | Patch/Doubling works complete with 5 mm M.S. plate including welding, gas cutting, fitting, fixing complete(b) Gas cutting to required size of 5 mm thick M.S. plate N.S.C. channel etc. including labour charges hire charges for all tools and plants. |
| 54 | Fitting & fixing star delta starter for motor / pump controler with necessary nuts & bolts all complete as per direction of EIC. |
| 55 | PROCUREMENT OF MATERIALS |
| 56 | 100 mm CI alfa Alfa valve (Flanged type) |
| 57 | Supply of Solvent Cement(Heavy bodied)as per IS 14182/1994 with latest amendments. (Item no-8 Page no-2 of WRDD SOR dated-8.9.2021) |
| 58 | Add GST @ 18 % on works Value of Item No 1 to 3.13 |
| 59 | Add L. W. CESS @ 1 % on works Value of Item No 1 to 5 |
