Tender For Beautification Work Of 02 Parks In Mangalpuri Colony Situated In Indira Nagar. - Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) / Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan), lucknow-Uttar Pradesh

Tender For Beautification Work Of 02 Parks In Mangalpuri Colony Situated In Indira Nagar. - Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m., All kinds of soil. DSR 2023- 2.8.1 2 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50m outside the periphery of the area cleared. DSR 2023- 2.31 3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :, 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). DSR 2023- 4.1.2 4 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :, 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources).DSR 2023- 4.1.8 5 Mild steel or iron work in plain work such as in R.C.C. or R.B. (when not included in an over all rates ) including bending for proper completion of the work and including supply of steel and its wastage , bends, hooks and authorised overlaps shall be measured up to floor two level. (SI No. 504) (Sanction Rate)SI 504 6 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:, Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 2023- 6.1.1 7 12 mm cement plaster of mix :, 1:4 (1 cement: 4 coarse sand) DSR 2023- 13.4.1 8 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR 2023- 13.80 9 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:, New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) DSR 2023- 13.47.1 10 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:, Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. DSR 2023- 13.62.1 11 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. DSR 2023- 15.56 12 SF of FRP DAKOCO vpes big size designer dustbin of approved quality approved by El etc made of polycarbonate or equvalent materials with including different colurtull colours of 3X1/2*X2 dia size etc including cartage of dustbin contractor their won sources etc including supply of all materials T &P all complete work (S/R)S/R 1 13 Supply & fixing of MS benches including cost of benches (shape & size attached with estime) fixing the wave slide including excavation PCC 1:4:8 cement coarse sand & 40 mm nominal grit with CC 1:2:4 cement coarse sand & 20 mm gauge stone grit including all material & labour required fixing and orienting etc all complete under the direction of the E/I. Sanction RateLDA Sanctioned Rate 14 Supply & fixing of wave slide (m) four seater SD-05B (height6) including cost of| wave slider (shape & size attached with estime) fixing the wave slide including excavation PCC 1:4:8 cement coarse sand & 40 mm nominal gnt with CC 1:2:4 cement coarse sand & 20 mm gauge stone gnit including all material & labour required fìng and onienting etc all complete under the direction of the Engineer. S/R 15 |Supply & Fixing of Swing 4 seater SW-2 including cost of swing seater (shape & size attached witth estime) fixing the swing seater including excavation PCC 1:4:8 cement C0arse sand & 40 mm nominal gnt with CC 1:2:4 cement coarse sand & 20 mm gauge stone gnt including all material & labour required fixing and onenting etc all complete under the direction of the EN, Sanction Rate 16 PROVIDING AND FIXING OF SHOULDER PRESS FUNPLAY FNF 005 HAVING DIMENSION: • PRODUCT AREA :3.6 FT X 2.3 FT • SAFE PLAY AREA :7.6 FT X 6.4 FT • AGE GROUP: 13 ABOVE YRS. FUNCTIONS: STRENGTHENS UPPER BACK, SHOULDER, BICEPS & CORE TECHNICAL SPECIFICATIONS: CENTRE PIPE : 100 NB GI C-CLASS PIPE- JINDAL MAKE SEAT FRAME : 32 NB GI B-CLASS PIPE- JINDAL MAKE MAIN FRAME : 40 NB GI B-CLASS PIPE- JINDAL MAKE HANDLE FRAME: 32NB & 25NB GI B-CLASS PIPE WITH TWO HANDLES SEAT & BACK REST: LLDP ROTOMOULDED SEAT WITH INBUILT BOLTS 3/8 X 1.5. PIPE CAP: GALVANISED CAP. BEARING SYSTEMS: SELF LOCKING BEARING SYSTEMS. IT WILL RESTRICT ITS MOVEMENT IN 120° ANGLE. BEARING HOUSING AND PIN :SEAMLESS PIPE & ROUND BAR BEARINGS : REPUTED MAKE (FAG/SKF) NUT BOLTS: GALVANISED NUT BOLTS NUT BOLTS CAP: NYLON 66 INJECTION MOULDED WITH SS M6 FASTNERS. POWDER COAT: DONE BY FIRST COAT OF PRIMER – JOTUN BRAND 40-50 MICRON THICKNESS AND TOP COAT OF PURE POLYESTER POWDER WITH 70- 80 MICRON THICKNESS. TOTAL THICKNESS IS 110-120 MICRON COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE. sanction rate attached 17 CYCLE DIMENSION: PRODUCT AREA: 3.2 FT X 2.2 FT SAFE PLAY AREA:7.2 FT X 6.2 FT FUNCTIONS: STRENGTHEN UPPER & LOWER LIMB, IMPROVES BODY CONSISTENCY & EGIBILITY, IMPROVE LUNGS & HEART EFFICIENCY AND STRENGTHENS HEART. TECHNICAL SPECIFICATIONS: MAIN FRAME: 25 NB & 40 NB GI B-CLASS PIPE -JINDAL MAKE SEAT FRAME: 32 NB GI B-CLASS PIPE-JINDAL MAKE HANDLE & SEAT: LLDPE STERING IS USED PIPE CAP: GALVANISED CAP. BEARING HOUSING AND PIN SEAMLESS PIPE & ROUND BAR NUT BOLTS: GALVANISED NUT BOLTS. BEARINGS PERMANENT SEALED OF REPUTED MAKE (FAG/SKF) POWDER COAT: DONE BY FIRST COAT OF PRIMER BRAND 40-50 MICRON THICKNESS AND TOP COAT OF PURE POLYESTER POWDER WITH 70-80 MICRON THICKNESS. TOTAL THICKNESS IS 110-120 MICRON COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE. 18 Chequerred precast cement concrete tiles 22 mm thick in footpath &courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand)., Medium shade pigment using 50% white cement 50% Grey cement. DSR 2023- 11.20.2

INR 2950 /-

Refer document