Tender For Construction Work Of Yoga Hall - Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out anddisposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. 2.6.1 2 Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. 2.25(a) 3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) 4.1.8 4 Brick Work with common burnt clay ( non modular) bricks of class - 150 in foundation and plinth in: Cement mortar 1:6 ( 1 cement : 6 coarse sand) 6.1.2 5 Brick Work with common burnt clay ( non modular) bricks of class - 150 in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement mortar 1:6 ( 1 cement : 6 coarse sand) 6.4.2 6 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) 13.4.2 7 Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement (40 mm thick floor) 11.3.1 8 Reinforced cement concrete work in beams, suspended floors, roofshaving slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). 5.3 9 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. 5.22.6 10 Providing and laying Vitrified tiles in skirting in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. 11.46.2 11 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 8.31 12 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 13.8 13 Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) DSR No. 13.46.1 14 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 10.15.1 15 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 9.20.135 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 16 13.62 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an an ever shade:13.62.1 two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture 17 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed withthe face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. 12.52.3 18 Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 16.91.2 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern. 19 Providing and fixing White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests water closet squatting pan ...making good the walls and floors wherever required. D.S.R.-17.1.1 20 Providing and fixing 10 litre capacity-coloured-White P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. DSR-17.18.1 21 Providing and fixing white vitreous china wash basin Flat back wash basin of size 550x400mm including making all connections but excluding the cost of fittings. DSR-17.25.2 22 Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.DSR-17.31 23 Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. concealed work, including cutting chases and making good the walls etc. 20 mm dia. nominal bore. DSR-18.8.2 24 25 mm dia. nominal bore. DSR-18.8.3 25 Providing and fixing brass bib cock of approved quality15 mm nominal bore. DSR-18.15.1 26 20 mm nominal bore. DSR-18.15.2 27 Providing and placing on terrace (at all floor levels) polyethylene water….pipes but without fittings and the base support for tank.DSR-18.48 28 Providing and fixing 15 mm dia. Nominal size C.P. brass bib cock of approved quality conforming to IS:8931.DSR-18.49.1 29 Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. DSR-18.53.1 30 U-PVC pipes (working pressure 4 kg / cm²) Single socketed pipe 110 mm dia 7189 31 Wiring for light point/ fan point/ exhaust fan point/ call bell point/plug point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. 32 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. 33 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as requiredfor inverter Wiring:-1x1.5 mm 34 S/Fof Call Bell fixed etc.complete in all respect. 35 S/F of LED tube light batten Fitting suitable for upto 1X22watt LED tube light on surface.complete in all respect. 36 Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular swifch, connections etc. as required. 37 Supplying & fixing suitable size Gl box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, C curve including connections, painting etc. as required for AC/Power 38 2+4 way, SPN, single door, MCB DB 39 2+10 way, SPN, single door, MCB DB 40 4 way (4+12), TPN, MCB DB, double door, horizontal type 41 6 A, to 32 A, ratings , SP MCB, C curve, 10 KA breaking capacity 42 S/F of 32 A DPMCB(10KA) C curve. 43 40 A, rating, 2 pole RCCB, 30mA 44 40 A, rating, 4 pole RCCB, 30mA 45 63 A, rating, 4 pole RCCB, 30mA 46 S/F ofMCB blanking Plate for DB 47 Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc.as required. 48 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 49 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 4 sq. mm + 1 X 4 sq. mm earth wire 50 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 6 sq. mm + 1 X 6 sq. mm earth wire 51 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 10 sq. mm + 1 X 6 sq. mm earth wire 52 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 16 sq. mm + 1 X 6 sq. mm earth wire 53 S/L of 10 sqmm3.5 coreAl conductor pvc insulated armoured served sheathed cable 1100 V grade. Complete in all respect. 54 S/L of 16 sqmm3.5 coreAl conductor pvc insulated armoured served sheathed cable 1100 V grade. Complete in all respect. 55 Aluminium lugs for 6 sq. mm cable 56 Aluminium lugs for 10 sq. mm cable 57 Aluminium lugs for 16 sq. mm cable 58 63 A, TPN, switch disconnector fuse unit (Panel mounted type) with ISI marked HRC fuses 59 S/F of electronic fan regulator 120-280 V ISI marked 60 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 61 Providing and fixing 25 mm X 5 mm G.1. strip on surface or in recess for connections etc. as required. 62 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. 63 S/F of LED Bulb 15 watt 64 S/F of Water tight oblong 10wLED Bulk Head luminaire havingDie cast Alluminium housingwithdriver set confirming to IP 65 and above protection ,suitable for 24 Hrs. 65 S/F of 18w to 20w LED reccess/surface mountingDown Lightfitting 66 S/F of 3w to 6w LED Decorative Mirror Lightfitting 67 S/Fof Singlelight wall bracket fixedon matching M.D.F.E.G. Board baseetc. 68 S/Fof Doublelight wall bracket fixedon matching M.D.F.E.G. Board baseetc. 69 S/F of 75w to90W LED Street Light Fitting havingdie cast Al body and diffuser,driver set. Complete in all respects. Cat AAA 70 E & T of exhaust fan/Fresh air fan 71 Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. 72 L/C of dismentling old wiring 73 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. 74 Supply and Installation of Fresh Air Fan 75 Supply and Installation of Exhaust Fan 76 Supplying , installation, testing & commissioning of heat detector operating at 54C / 57C with rate of rise cum fixed temperature (dual thermistor ) type with mounting base complete with all connection etc. as required. 17.1.1 77 Supplying , installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required. 17.1.2 78 Supplying , installation, testing & commissioning of manual call boxes of MSconstruction in surfacee/recess with stainless stell chain & hammer assembly complete with glass and button etc. as required. 17.1.3 79 Supplying , installation, testing & commissioning of manual call boxes of ABS type in surface / recess with stainlesssteel chain & hammer assembly complete with glass and push button etc. as required. 17.1.4 80 G.S.T -
