Tender For Facade Lighting Work At Shamshabad Marg Underpass Of Inner Ring Road. - Supply, Installation, Testing And Commissioning Of State-Of-The-Art Laser-Cut / Glowing & Embellished Panels , Laser Cut Metal Sheet Cladding,For The Entire Height Of The C

Sharing tender

Tender For Facade Lighting Work At Shamshabad Marg Underpass Of Inner Ring Road. - Supply, Installation, Testing and Commissioning of state-of-the-art laser-cut / glowing & embellished panels , laser cut Metal sheet cladding,for the entire height of the Columns upto the ceiling. Also,on both the sides and the deck wall of the face of the underpass. fitted with LED lighting with electronic driver which offers Protection against Short Circuit, Over- Voltage& Over- Current, IP 65 protection,voltage input AC240V, estimated Lifetime-L70 @ 50,000hours minimum. Alongwith the proper moubting arrangement with the foundation plate. Final design as per the reference image attached, to be approved by the ADA. 2 Supply, Installation, Testing and Commissioning of LED RGBW round Spot flood Luminaire for Facade lighting with die cast aluminium housing, with powder coating of wattage 75W-85W.The beam angle of the fixture shall be medium. The luminaire shall have high optical efficiency PMMA/PC lenses. Luminaire shall be complete with driver and capable of operating at line voltage without any separate power supply from 120 to 270 V AC, 50 Hz, power factor > 0.9. High power LEDs shall be SMD type and fixture shall have system efficacy at System level (Not Chip Level) >=40 LPW, Life of fixture (Including Driver): 50K Hrs. @ L70 Lumen maintenance at 35 °C Ambient Temperature. minimum Internal Surge Protection 4KV, 20 kV external surge protector, must be having minimum IP66 & IK 07 Impact rating & IEC Classification Class I, RoHS. Fixture shall be suitable to operate at ambient temperature range of 0°C to +45°C. Luminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015 IES, LM 79, & TTC certificates should be provided from NABL accredited lab. ROHS compliant, BIS Certification for Luminaires & Drivers 5 Years Warranty. The work includes all the installation & mounting accessories, as approved by the department. (Make : Philips, Bajaj, Havells, Unicor, Vak, Eveready as approved by E./Ic.) 3 Supply, Installation, testing & commissioning of complete Chemical Earth Pit System with inspection chamber and cover, 3m earth electrode, along with all the necessary accessories such as 25mm double compression Cable glands with Lugs, 19mm PG Cable glands with Lugs etc. 4 Supply and laying of 4.0 sq. mm x 3 core ISI marked, FRLS PVC insulated, single core copper conductor cable in exising conduits with proper connections, glands, etc. 5 Supply and Laying of one number 3.5core x25 sq mm Aluminium Armoured PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground or pipe or trench as required including excavation, sand cushioning, protective covering and refilling the trench etc as required. 6 Supply and fixing IP67 weatherproof box for Power Supply with cable glands at input and output of the box, size of the box should be sufficient to accommodate the power supply of the fixtures. 7 Stand Alone DMX controller with Zone management and 16-bit channel management. RDM Enabled. Extensive external triggering operations via Dry Contact ports, TCP/UDP along with Calendar Triggers. Ethernet Integration. IOS/Android APP based wireless control. 1024 DMX channel control with an option to get a paid upgrade to 2048 channels. DC5-5.5V Input via external adaptor. Up to 32BG memory. Using light show authoring software to select from standard 10 effects, adjust effect settings such as color, speed, and brightness. 8 DMX converterwith 3 and 5 pin XLR points for programming of lights. 9 DMX Splitter- The DMX-512 splitter shall have minimum one DMX input and six DMX output connections, the sockets being standard 5-pin AXR connectors. The opto isolated DMX-512 splitter shall have a power on LED and DMX active LED indication on the front panel. The opto isolated DMX-512 splitter input shall be internally terminated. 10 DMX Cable 18 AWG 18/0.20 mm x 2 Core ATC copper conductor PE insulated, core twisted in a circular form inner sheathed with moisture proof polymer, beard shieleded (80% with ATC Copper, outter jacket with matt finished PVC. 11 Supply, installation, testing and commissioning of stand mounted panel made of 16 SWG GIsheet, double door and duly pretreated and power coated to make it weather proof. Astonomical timerMCCB 65 A, switch 3 pole TPN. 12 S/F of 1 mm. single core copper wire. 13 S/F of 1.5 mm. single core copper wire. 14 S/F of 2.5 mm. single core copper wire.