Tender For Supply Of Pr-28040659_Qaqc Item - 1 28040659 0001 0001 300844382 JAW-CRUSHER,LAB,25TO10MM,65MM,1.5KW Technical Details Name : Rupa Ray Contact : Email : Ray.Rupa@ssl.amns.in 2 NO JAW-CRUSHER,LABORATORY GAP ADJUSTMENT:25 TO 10 MM , FEED SIZE:65 MM , RATED POWER:1.5 KW OUTPUT SIZE - 2ND PASS:-3.35 MM , MOUNTING TYPE:FLOOR WORKING PRINCIPLE:PRESSURE , RATED VOLTAGE:440 VAC OUTPUT SIZE - 1ST PASS:+3.35 MM Item Details : Specification of Jaw Crusher: Mat. Code - 300844382 1. Iron bearing, Limestone, Dolomite <(>&<)> Quartz, Coke <(>&<)> coal sample crushing. 2. Safety features requires while material clogging due to sudden material dumping. 3. Overload protection required 4. Throughput Min 100 kg/hr 5. MOC- Mild steel body with hardened steel jaw blades 6. All moveable parts of equipment cover with Pully Guard. 7. spares required for 2 years equipment operation (provide spares list) 8. Installation <(>&<)> commissioning is in vendor scope. Item Note : 2 28040659 0002 0002 300935755 CRUSHER,ROLLER,150X250MM,120RPM,12.5MM Technical Details Name : Rupa Ray Contact : Email : Ray.Rupa@ssl.amns.in 2 NO CRUSHER,ROLLER ROLL DIMENSION (WIDTH X DIAMETER):150 X 250 MM , ROLLER SPEED:120 RPM ROLL MATERIAL:MANGANESE STEEL/HARDENED STEEL , FEED SIZE:12.5 MM OUTPUT SIZE:3000 µM , CRUSHING CAPACITY:200 KG/HR MOTOR POWER:3 HP Item Details : Sl. No. Specification Details 1 Purpose For coal and coke sample preparation. Secondary Crushing of the sample. 2 Grinding material Coal and coke. 3 Max. feed size 12.5 mm 4 Output size -3 mm or better 5 Feed hopper opening (Dimension) According to the requirement. 6 Power supply 3 phase, 50 AC with neutral 7 Motor As per the machine requirement. 8 Gap adjustment Required. The gap adjustable by a spring-loaded screw rod. 9 Lock for gap adjustment. Required. When desired gap is adjusted, the position is locked. 10 Floor mounted equipment Required. 11 Roller MOC Manganese hardened steel 12 Crushing chamber MOC Specially hardened alloy steel 13 Integrated Dust extraction system Required, to remove airborne dust during and after the operation. 14 Compliance Should be compliant with IS, ISO and ASTM for sample preparation and design to meet laboratory safety regulations. 15 Spares and consumables Required for two years of operations with complete list of spares. 16 Safety Should be compliant with all safety norms. 17 Installation and commissioning In vendor’s scope. Item Note : 3 28040659 0003 0003 300938042 CRUSHER,HAMMER,197MM,5KG/HR,6MM,212µM Technical Details Name : Rupa Ray Contact : Email : Ray.Rupa@ssl.amns.in 2 NO CRUSHER,HAMMER TOOTHED HAMMER SIZE:197 MM , CAPACITY:5 KG/HR , FEED SIZE:6 MM OUTPUT SIZE:212 µM , MOTOR SPEED:2800 RPM Item Details : Sr. No. Details Specification 1 Purpose Coal and coke sample preparation. Fine Grinding of the coal and coke sample. 2 Sample Material Coal and coke 3 Feed size 6 mm 4 Output size 212 microns or better. 5 Motor speed 2800 RPM 6 Capacity 5 kg per hour 7 Fixed toothed circular inserts (dia) According to the requirements. 8 Hammer MOC Manganese Hardened steel. 9 Grinding chamber MOC Specially hardened alloy steel 10 Power supply AC- 3 phases power supply. 11 Discharge mechanism Required for direct discharge of output material into the container. 12 Sieves Required as per mentioned output size. Non-puncturing and non-corroding sieves. Additional sets of sieves required. 13 Dust collection system Required. 14 Compliance Should be compliant with IS, ISO and ASTM for sample preparation and design to meet laboratory safety regulations. 15 Spares and consumables Required for two years of operations with complete list of spares. 16 Safety Should be compliant with all safety norms. 17 Installation and commissioning In vendor’s scope. Item Note : 4 28040659 0004 0004 300132050 BALL MILL,LAB,ID:300XL:300MM;30RPM;0.5HP Technical Details Name : Rupa Ray Contact : Email : Ray.Rupa@ssl.amns.in 1 NO BALL MILL,LABORATORY DRUM SIZE : ID:300XLONG:300 MM , GAUGE OF THE DRUM : THICK:6 MM SPEED : 30 RPM , DRIVER : MOTOR , DRIVER CAPACITY : 0.5 HP Item Details : Sr. No. Specification Details 1 Purpose Coal and coke sample preparation and Sample grinding. 2 Sample material Coal and Coke 3 Capacity 2 kg 4 Feed size 10 mm 5 Output size 75 microns or better. 6 Different Ball size Required, for optimal grinding 7 Motor speed 50-1440 RPM or better. 8 Number of Grinding vessels 4 jars (Grinding vessels) 9 Capacity of Grinding vessels 50-250 ml or better. 10 Jars (Grinding vessels) MOC Specially hardened alloy steel 11 Number of balls per jar As per the requirement. 12 Grinding ball MOC Tungsten carbide. 13 Grinding ball diameter As per the requirement. 15 Power supply AC-3 Phase 16 Overload protection Required. Automatically shuts off when overload sample is charged. 17 Integrated Dust collection system Required, for removing dust during or after the operation. 18 Compliance Should be compliant with IS, ISO and ASTM for sample preparation and design to meet laboratory safety regulations. 19 Spares and consumables Required for two years of operations with complete list of spares. 20 Safety Test should start when the door is closed. Auto door lock during operation. Should be compliant with all safety norms. 21 Installation and commissioning In vendor’s scope. 5 28040659 0005 0005 300160108 PULVERIZER,LAB,VIBRATORY CUP MILL,150ML Technical Details Name : Rupa Ray Contact : Email : Ray.Rupa@ssl.amns.in 1 NO PULVERIZER,LABORATORY, TYPE: VIBRATORY CUP MILL, , CAPACITY: 150 ML, INLET FEED PARTICLE SIZE: 5 MESH, , OUTLET PRODUCT SIZE: 300 MESH, DRIVER: ELECTRICAL MOTOR, , DRIVER CAPACITY: 1 HP ADDITIONAL INFORMATION: MATERIAL: MANGANESE STEEL Item Details : Specification of PULVERIZER,LAB,VIBRATORY CUP MILL,150ML 1 Sample Material: Iron ore pellets, Lump ore, Sinter, Ferro Alloys, Coke, Coal Limestone, Dolomite, quartz, Slag 2 Feed Size = 8 mm 3 Output Size = up to -45 to 75 micron or less 4 Cycle time = 30 to 180 seconds for 20 to 80 gm sample. 5 Motor power consider as actual requirement for equipment operation. 6 Safety: Overload tripping mechanism required <(>&<)> door sensor required. 7 Capacity: 15-20 samples per hours. 8 Bowl Set required as below, Hardened Steel – 5 no’s Tungsten Carbide-Lined- 01 no 9 Spares for 2 years equipment operation (provide spares list) 10 Automatic <(>&<)> fully programmable with PLC system. - Digital setting of Programmable Grinding cycle time base on requires material fineness. - Digital Setting of Time in Seconds. - Floor mounting required. 11 Installation <(>&<)> commissioning is in vendor scope. Item Note : 6 28040659 0007 0006 300908687 M/C,POLISHING,PN:PMV008,MN:BAINPOL–VT Technical Details Name : Rupa Ray Contact : Email : Ray.Rupa@ssl.amns.in 1 NO MACHINE,POLISHING WORKING WHEEL DIA:203.2 MM , DISC SPEED:50 TO 1000 RPM DIRECTION OF ROTATION:CLOCKWISE AND COUNTER CLOCKWISE OPERATING TYPE:SEMI-AUTOMATIC IN BUILT PROGRAM OR RECOMMENDED PARAMETERS:IMPORTED DRIVE FOR SMOOTH SPEED CHANGE,DIGITAL SPEED INDICATOR,ILLUMINATED LED INDICA SAMPLE HOLDER DETAILS:HOLDING BAND , MAKE MODEL/BRAND:BAINPOL – VT MAKE NAME:CHENNAI METCO , MAKE PART NO:PMV 008 Item Details : EQUIPMENT: BENCH POLISHER FOR POLISHING COAL PETROGRAPHY SAMPLES. TS: TYPE: TABLETOP DESIGN DISC DIA.: 8 INCHES ROTATION SPEED: CONTINIOUSLY VARIABLE 50 to 1000 RPM DISPLAY TYPE: DIGITAL TOUCH CONTROL WITH SPEED INDICATOR WATER JET WITH CONTROL VALVE NECESSARY REQUIRED ACCESSORIES REQUIRED. MAGNETIC DISC AND FERROMAGNETIC CARRIER SHEETS REQUIRED SAFETY GEARS REQUIRED CLEANING MECHANISM REQUIRED COOLING MECHANISM REQUIRED SPARE PARTS <(>&<)> CONSUMABLE REQUIRED FOR 2 YEARS EQUIPMENT OPERATION Item Note : 7 28040659 0008 0007 300904402 SPLITTER,SMPL,RIFFLE,16MM,10KG,4 Technical Details Name : Rupa Ray Contact : Email : Ray.Rupa@ssl.amns.in 3 NO SPLITTER,SAMPLE TYPE:RIFFLE , FEED SIZE:16 MM , HOPPER CAPACITY:10 KG NO OF OUTPUT VOLUME DIVISION:4 ADDITIONAL INFORMATION:SS 50MM SLOT WITH SCOOP AND COLLECTION BOX, STD. METHD. FOR REDUCING SAMPL.OF AGGREGATE TO TESTING SIZE. Item Details : Item Note : 8 28040659 0009 0008 300904782 SPLITTER,SMPL,RIFFLE,10MM,5KG,4 Technical Details Name : Rupa Ray Contact : Email : Ray.Rupa@ssl.amns.in 3 NO SPLITTER,SAMPLE TYPE:RIFFLE , FEED SIZE:10 MM , HOPPER CAPACITY:5 KG NO OF OUTPUT VOLUME DIVISION:4 ADDITIONAL INFORMATION:SS 30MM SLOT WITH SCOOP AND COLLECTION BOX, STD. METHD. FOR REDUCING SAMPL.OF AGGREGATE TO TESTING SIZE. Item Details : Item Note : 9 28040659 0010 0009 300908023 DRUM,LAB,MICUM,1:60,2200W,415V Technical Details Name : Rupa Ray Contact : Email : Ray.Rupa@ssl.amns.in 1 NO DRUM,LABORATORY TYPE:MICUM , GEAR RATIO:1 : 60 , POWER RATING:2200 W VOLTAGE RATING:415 V , CURRENT RATING:16 A ADDITIONAL INFORMATION:FOR COKE ISO-556 Item Details : Specifications for Micum Drum Following are the specifications for the Micum Drum, it is use for the determination. of the mechanical strength of coke. Sr.No Parameter Requirement as per IS-1354 <(>&<)> ISO-556 1 MOC Suitable steel grade 2 Drum Plate thickness Side portion of 10 mm and 6 mm for periphery 3 Size of the Drum 1000 x 1000 mm 4 Lifters four angle sections (or lifting flights) Each lifting flight, equal in length to the length of the drum and constructed of 100 mm x 50 mm x 1O mm thick mild steel angle, shall be fixed rigidly to the full length of the internal curved surface of the drum, two stub-axles, at least 250 mm in the clearance below the drum shall be not less than 230 mm and not more than 300 mm. 5 Shaft Suitable graded hardened SS material 6 Drum rotation speed of 25 r/min ± 1 r/min and stops within one revolution. The equipment shall be fitted with a revolution counter and with an automatic device for stopping the drum after a predetermined number of revolutions. 7 Tray approximately 1500 mm x 1100 mm and 200 mm deep with suitable steel sheet. 8 Programmer PLC/Microprocessor based 9 Control Panel Consists of: Time control, RPM Control with proper switches and accessories 10 Others Branded suppliers with previous history of supply to major Industries <(>&<)> User list to be shared with us during submission of quote. 11 Safety All moveable parts cover with safety guards. 12 G.A.Drawing Require. Item Note : 10 28040659 0011 0010 300905749 TESTER,GRINDABILITYINDEX,0.05KG,50G,ELE Technical Details Name : Rupa Ray Contact : Email : Ray.Rupa@ssl.amns.in 1 NO TESTER,GRINDABILITY INDEX LOADING CAPACITY:0.05 KG , SAMPLE SIZE RANGE:1.18 TO 0.6 MM MASS OF TEST SAMPLE:50 G , SPEED:20 RPM OPERATED TYPE:ELECTRICAL CONFORMING TO STANDARD:AS PER ISO 5074 AND IS 4433 , POWER RATING:40 W VOLTAGE RATING:10 A , ADDITIONAL INFORMATION:ALONG WITH ACCESSORIES. Item Details : HGI-TS Certified Standard sample require, Purpose: For Calibration of Hard Grove Grindability Tester Capacity: 1 Kg each sample Certificate Validity: 1 year from the date of receipt (Certificate need to compliance ISO/IEC -17025) Item Note : 11 28040659 0012 0011 300907395 M/C,SWELLING-INDEX,15-17ML,41MM,14MM,230 Technical Details Name : Rupa Ray Contact : Email : Ray.Rupa@ssl.amns.in 2 NO MACHINE,SWELLING INDEX CAPACITY:15-17 ML , CRUCIBLE EXTERNAL DIAMETER AT TOP:41 MM CRUCIBLEINTERNAL DIAMETER AT BASE:14 MM , CRUCIBLE EXTERNAL HEIGHT:26 MM TEMPERATURE RATING:900 °C , VOLTAGE RATING:230 OPERATING TYPE:MANUAL , ADDITIONAL INFORMATION:AS PER ISO 501 Item Details : Item Note : MACHINE,SINGLE DISC SAMPLE POLISHINg
