Tender For Beautification Work In Ratanlal Kanwar Lal Patni Public Park In Ward Number 53 Kishangarh Mp-Lad - Surf board Providing, and fixing of Surf Board of size 910mm (Length) x 860mm (Width) x 1400mm. (Height) fabricated with a center pipe of 100mm Nominal Bore shall be made from c class G.1. pipe. The sleeve pipe shall be made of 125mm OD seamless pipe with thickness of 5mm and bolted to main frame with M10 55 bolts. The bottom support shall be welded of M.S. plate of Ø 250 mm & 10mm thickness. The handle frame of 25NB shall be made from c class G.1. pipe The paddle frame of 50NB shall be made from c class G.1. pipe supported with 70X8mm bend M.S. flat and can be replaceable. The foundation to be used for fixing should be a structure and shall be made from center pipe of G.1. of 80N8 c class welded with M.S. round plate of $250 mm & 10mm thick. Main pipe shall be supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Bushes shall be used of 70mm Outer Diameter with 5mm thickness. The footrests shall be made from Aluminum casting material of size 320ins to be used of Diameter 35mm, 25mm, and 17m shall be made up from SAE 8620 bright. The Bearings shall be used of 6007zz 62 ar and 6203zz permanent lubricated sealed bearing of reputed brand (SK)+1G). High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders of Ackzonoble or Berger Paints with 60 to 70 Micron thickness. A16, A 24 mm circlips shall be used for assembly. Bolt MBX16 mm and NY lock nut of MB shall be made of SS 304 used on nylon cap mounted on pins to protect bearings and pins from rain and dust, all complete as per drawing, design, directions and approval of Engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of 2 cross trainer Providing and fixing of Cross trainer of size 1320mm (Length) x 600mm (Width) x 1750mm. (Height) fabricated with the main frame Pipes of 80NB shall be made of C Class G.I and pipe with single bend pipe with 250mm radius. The bottom support of M.S. round plate of $250 mm & 10mm thick. The Handle Frame shall be made up of 25NB C Class GL. Pipe. The foundation should be used for fixing is a structure and shall be made from center pipe of G.I. pipe of 80 NB C class welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe should be supported with 25 mm x 25mm M.S. angles of 3 mm thickness and 20mm x 40mm and CRC square pipes of 3mm thic sess. To build structure bushes to be used which shall be made from M. wamless pipe of 60mm OD with 5 mm thickness. The footrests shall be made from Aluminum casting material of size 130 mm X 310mmX5mm thickness and mounted on M.S. Plate of Size 130mmx310mmx3mm thick. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. Pmm X270mm X5mm. For support to footrest of 200mmX250mm with 3mm thickness M.S. Plate shall be used. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. The pins to be used shall be made up of 35 mm SAE 8620 bright material. The bearing shall be used are of 6007zz permanent lubricated sealed bearing of reputed brand (SKF/FAG). High tensile steel with galvanized nut bolts shall be used for assembly. The cerclips shall be used for assembly of A34. The powder coating shall be done with Pure Polyester powder of Ackzonoble or Berger with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of Engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc.al shape of. 3 SEATED PULLER Providing and fixing of Seated Puller of size 1900mm (Length) x 740mm (Width) x 1920mm (Height) fabricated with a center pipe is of 100NB shall be made from C Class G1, pipe. Bottom support of MS. round plate of 250 mm & 10mm thickness shall be welded. All linkages shall be made up of 25NB C class G1. pipe. The handle Frame of 32N8 C class Git pipe. The seat frame of 32NB C class G1 pipe, To build structure bushes to be used which shall be made from seamless pipe of 60mm 0.0. and Smm thickness as well as 60mm diameter solid bar bush shall be used. The foundation should be used for fixing is a structure and shall be made from center pipe of 6 of 80 NB C class welded with MS. round plate of $250 mm & 10mm thick Main pipe shall be supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm 0mm CRC square pipes of 3mm thickness. Foundation cover Closing Cap shall be made from FRP Maternal, The seats and Back rests to be fitted on the outer frames shall be made up of M.S. Sheet of size 330 mm x 300 mmX2mm thickness and deep dra and pressed in tools and dies to have uniform radius of 20 mm with no sharp Jedg Closing Caps shall be made up of high quality Fiber reinforced Plastic material Pins to be used of Diameter 25mm and 17mm shall be made up from SAE 8620 bright material. The bearings shall be used of 6205zz and 6203zz permanent lubricated sealed bearing of reputed brand (SKF/FAG) High tensile steel with galvanized nuts & bolts shall be used for assembly. The cerclips to be used for assembly are of A16 The powder coating shall be done with Pure Polyester powders of Ackzonoble or Berger Paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of Engineer-in-charge regarding material, shape of equipment, colour fot metal, seat and pedal), and fixing of equipment etc 4 chest press Providing and Fixing of Chest Press of se 2000 (Length) 710 mm (Width) x Proving and huing 2200mm (Height) fabricated with the center pipe of 100 shall be made up of Das Gt. pipe. The bottom shall be welded with support of MS. round plate of $250 & 10mm thickness. The connecting pipes stult be made up from 2548 C class G pipe The handle frame shall be made up from 3248 dan 61. pipe. To build structure bushes to be used which shall be made from MS seamless pipe of 60mm 0.0 land Smm thickness 60mm diameter solid bar bush shall be used. The foundation should be used for fwing is a structure and shall be made from center pipe of 1 of 0 class welded with MS, round plate of $250 mm A 10mm thick. Main pipe shall be supported with 25 mm 2 25mm M.5. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. The seats and Back rests to be fated on the outer frames shall be made up of M.S. Sheet of size 330mm x 300 menx2mm thickness and deep drawn and pressed in tools and dies to have unifone radius of 20 mm with ne sharp edges Closing Caps shall be made up of high quality Fiber reinforced Plastic material Foundation cover Closing Cap shall be made from FRP Material with 0.7 dvickness. Pins to be used of Diameter 25mm and 17mm shall be made up from SAE 8620 bright material, Bolt MBX15 mm and Nylock nut of MB shall be of 55 304 uved an nylon cap mounted on pins to protect bearings and pins from and dust bearings shall be used are of 6205ar & 62034 permanent ubricated sealed bearing of reputed brand (543/FAG) High tensile steel with sized nuts & holts shall be used for assembly. The cerclips to be used for locking up of A24 mm & Alémm. The powder coating shall be done with Pure Polyster powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness, all lete drawing, design, directions and approval of Engineer in charge regarsing material, shape of equipment, colour (of metal, seat and pedall, and fixing of equipment 5 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: 6 SIT BOARD DOUBLE providing and fixing of sit up board double of 1760 (Length) x 1140 mm (width) x 650mm height fabricated with the main frame of 25mm lift shall bel tom class G... pipe FRP sheet of 3mm thickness shall be moulded on mat frama the remaining frame of the sit up board of 32mm NB shall be made from C class GI Pipe the powder coating shall be done with pure polye polyester powder atka ackaunable or berger paints with 60 to 70 micron thickness the foundation shoud be used for fiving as structure an shall be made from center pipe G.. of BONG C class welded with MS. round plate a 250mm & 10mm thick. MS. main pipe shall be supported with 25mm x M.S. angles of mm thickness. and 25mmx40mm CRC square pipes of 3mm thickness alt complate as per drawing design directions and approval of engineer-is-charge regarding material shape of equipment colour tof metal, seat and pedal and fixing of equipment etc. 7 DOUBLE TWISTER STANDY Providign and fixing of bouble Twister standing of size 1500mm 10 (Length) x 600mm (width) x 1300mm (Height) Fabricated with a center pipe of 100NB shall be made from C Class G.I. material the bottom shall be welded with support of M.S. round plate of 250mm & 10mm thickness. The bottom frame of 32NB shall be made from C class G.I. pipe handle frame of 25NB shall be made from G.I. pipe the foundation should be used for fixing is a structure and shall be made from center pipe of G.1. of 80 NB C class welded with M.S. round plate of 250mm & 10mm thick. Main pipe shall be supported with 25 mm x 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. the Twister plate to be fitted on the bottom frame shall be made up of M.S. round plate of size 300mm and 10mm thick. Closing caps shall be made up of high quality fiber reinforced plastic material pins to be used of diameter 35mm shall be made up from SAE 8620 bright material the bearings, shall be used are of 6205 permanent fubricated sealed bearing of reputed brand heigh tensile steel with galvanized nuts and bolts shall be used for assembly the powder coating shall be done with pure polyester powders from ackzsnoble paints with 60 to 70 micron thickness. all complete as per drawing desing directions and approwal of engineer-in-charge regarding material shape of colour (of metal seat and pedal) and fixing of equipment etc. 8 SEATING & STINDING TWISTER providign and fixing of seating & standing twister of size 1700mm (Length) x 540mm(width)x 1250mm (Height) fabricated with a center pipe of 100mm NB shall be made from C class G.I. round pipe the M.S. round plate of 250 mm & 10 mm thickness shall be welded at bottom, handie and bottom sleeve pipe of 125mm OD with thickness 5mm should be provided for easy assembly, replacement and maintenance. the bottom frame of the seating & standing twister of 32NB 50 NB and 25 NB shall be made from Cclass G.I. pipe the handle frame of seating & standign twister of 25 NB & foot resting frame of seating side shall be made from C class G.I. pipe of 25mm NB the foundation should be used for fixing is a structure and shall be made from center pipe of G.1. of 80 NB C class welded with M.S. round plate of 250 mm & 10mm thick main pipe shall be supported with 25mm X 25mm M.S. angles of 3 mm thickness, and 20mm x 40mm CRCA square pipes of 3mm thickness. the twister plate to be fitted on the bottom frame shall be made up of M.S. round plate of size 300mm dimeter and 10mm thickness. closing caps shall be made up high quality fiber reinforced Plastic mterial, the pins to be used which shall be up of 35 mm SAE 8620 bright material, the bearings shall be made of fo 6205zz permanent lubricated sealed bearing of reputed brand (SKF/FAG) high rensile steel with galvanized nuts & bolts shall be used for assembly the powder coating shall be done by pure polyester powder of berger paint with 60 to 72 micron thickness, all complete as per drawing, design, directions and approval of engineer-In-charge regading material, shape of equioment colour (of metal seat and pedal), and fixing of equipment etc.
