Tender For Quotation For Material Rates As On Feb. 2025 For Ssr - 3 Seater Sofa:-Providing & Supplying Factory Made Three Seater Sofa For Hon. Speakers Office Having Size 1520 X 815 X 435Mm Height Made Out Of Specified Size Of Cctw Section Or Adequate Siz, Mumbai-Maharashtra

Tender For Quotation For Material Rates As On Feb. 2025 For Ssr - 3 SEATER SOFA:-Providing & Supplying factory made three seater sofa for Hon. Speakers office having size 1520 x 815 x 435mm height made out of specified size of CCTW section or adequate size of frame with 6mm thick marine plywood as per standard ISO for covering from back & ari rests, Using 100mm thick branded quality form covered one 25mm soft form and arms having 50 x 50 mm CCTW frame and 50 density branded form covered 25 mm plain soft arm. All work covered with high quality upholstery approved make embroidery approved colour of fabrics directed by Architect & Engineer in charge the necessary and essential hardware, jute, manjarpatt cloth, casement spring etc. will be have good and approved make. All exposed surface will have to be finish with melamine polish and completed as directed by engineer in Charged 2 2 SEATER SOFA:- Providing & supplying factory made two seater sofa for Hon. Speakers office having size of 1500 x 600 x 450 mm height made out of specified size of CCTW section or adequate size of frame with decorative curved legs and back rest and bottom with round edges with required size of moulding of all edges. And seat and back with 6mm thick marine plywood as per standard ISO using 100mm thick branded quality foam covered 25mm soft foam to seat and back The seat and back of sofa will have to be finished with high quality of jute cloth and embroidery or equivalent cloth respectively as directed by Architect and engineer in charge The necessary hardware, jute, manjarpat cloth etc will be have good and approved make And all exposed surface will have to be finished with melamine polishing 3 SINGLE SEATER SOFA:- Providing & Supplying factory made Single sealer sofa chair for Hon. Speakars office having size 915 x 765 x 1220 mm (+/- 50mm) height made out of specified size of CCTW section or adequate size of frame with 6mm thick marine plywood as per standard ISO for covering from back & arm rests, Using 100mm thick branded quality form covered one 25mm soft form and arms having 50 x 50 mm CCT frame and 50 density branded form covered 25 mm plain soft arm. All work covered with high quality upholstery approved colour of fabric as directed by Architect & Engineer in charge the necessary and essential hardware, jute, manjarpatt cloth, casement spring etc. will be have good and approved make. All exposed surface will have to be finish with melamine polish and completed as directed by engineer in Charged- 4 VISITOR CHAIR:-Providing & Supplying factory made center pivoted revolving high back executive chair for Hon. Speakers office which frame made out of CCTW section or adequate size of frame and SS form in back side with 6mm marine plywood as per standard ISO for covering from back, seat & arm rest having size of back depth 710mm, width 750mm and having height of 1200 to 1300 mm and seat height 425 to 475 mm (+/-20mm) with CCTW five legs with Push back arrangement. The chairs shall have high density moulded 360 revolving on suitable base. And have gas lift, heavy duty twin wheel casters to take minimum of 95Kg/caster with one having height adjustment and other to arm rest. The chair shall be provided high quality Napa leather approved make & shade by Architect & Engineer in Charge. All exposed CCTW surface will have to be finished in melamine polishing as directed by Engineer in charge- 5 EXECUTIVE TABLE:- Providing & Supplying factory made executive table for Hon. Speakers office made out of CCTW frame, legs, top, internal vertical & horizontal partition Including different sizes of moulding wherever directed by Engineer in Charge drawer and sides closing by CCTW adequate sizes. The wood work shall have to be finishing with melamine polish. The hardware and necessary & essential fittings shall have to be approved make & shade require to be approved from Architect & Engineer in Charge. (Table size 2100 x 1050 x 810 mm)- 6 FOOT REST:- Providing & Supplying factory made CCTW Foot rest with adequate size of legs and top for Hon. Speakers office shall have to be finish with high quality upholstery approved make Napa leather of approved colour as directed by Architect & Engineer in charge the necessary and essential hardware, jute, manjarpatt cloth etc. will be have good and approved make. All exposed surface will have to be finish with melamine polish (Size: 450 x 400 mm) 7 CENTER TABLE:- Providing & Fixing factory made CCTW Centre Table for Hon. Speakers office having size of 760 x 400 x 300 mm with decorative legs & top edges of four side shall have to be completed with approved design as per Architect instruction and front side have two drawers having 125mm size with decorative antique brass handles and work shall be finished with melamine polish to all exposed surfaces etc.- 8 TABLE:- Proving & Supplying factory made Table for Hon. Speakers office having size of 760 x 450 x 430 mm and shall have rest on centrally supported decorative round pillar having base with four small legs with decorative moldings were as directed by Architect. The work shall be finished with melamine polished to all exposed wood work including essential hardware etc. completed- 9 CCTW CHAIR WITH ARMS:- Providing & Supplying factory made CCTW chairs with arms for Hon. Speakers office as per design curved with adequate size of arms & legs and chair seat/ back shall have to be finish with high quality upholstery approved make Napa leather of approved colour as directed by Architect & Engineer in charge the necessary and essential hardware, jute, manjarpatt cloth etc. will be have good and approved make. All exposed surface will have to be finish with melamine polish (Chair Size: 530 x 460mm- 10 COUNTER WITH SINK:- Providing & supplying working counter with sink in SS 304 sheets an pantry for Hon. Speakers office having size 66 x 24 x 34 and providing hanging counter shelves of 6 and 15 in width in full length of platform, providing wall mounted cabinet of size 60 x 12 x 24 above main platform as storage unit and finishing counter cabinet having 3 sixes closed with adequate size of door shutter and work shall be complete as per direction and instruction given by Architect and Engineer in charge - 11 3 SEATER SOFA:- Providing & Supplying factory made three seater sofa for Hon. Speakers office having size 1520 x 815 x 435mm height made out of specified size of CCTW section or adequate size of frame with 6mm thick marine plywood as per standard ISO for covering from back & ari rests, Using 100mm thick branded quality form covered one 25mm soft form and arms having 50 x 50 mm CCTW frame and 50 density branded form covered 25 mm plain soft arm. All work covered with high quality upholstery approved make embroidery approved colour of fabrics directed by Architect & Engineer in charge the necessary and essential hardware, jute, manjarpatt cloth, casement spring etc. will be have good and approved make. All exposed surface will have to be finish with melamine polish and completed as directed by engineer in Charged

INR 1 /-

Refer document

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB