|
| 1 | E/W in Excavation of Foundation in ordinary soil 1 including lift upto 1.5 m. and lead upto 30 m. including all material labour t&P. |
| 2 | Filling of carted earth including watering and 2 ramming of earth etc complet of works as per direction of engineer-in-charge |
| 3 | Providing and injecting chemical emulsion for Preconstructional antitermite treatment around the top surface (Plinth area of the building at ground floor only shall be measured as per I.S 6313 (part ii 1981). The rate of application of chemical emulsion shall be as follows:-(1) Treatment of soil under apron along external perimeter 5 Ltrs/Sqm. |
| 4 | Providing & Laying in Cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone ballast with 40 mm. (nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work. And curing complete also including cost of formwork in foundation and floor. |
| 5 | R.C.C. work with cement approved coarse sand and 2 cm. guage approved stone grit in the proportion of 1:1.5:3 in Foundation/Column excluding its fixing and binding wire and including neccesary centaring and shuttering Including supply of all material, labour, T&P etc. Required for proper completion of the work. |
| 6 | TOR Steel work in plain work such as R.C.C. works in slab, beam, Plinth band column, etcincluding bending for proper shape and supply of steel and its wastage bend hook and authorised over lapping shall be measured & including cost of bending wire |
| 7 | M-150 Brick work in 1:6 one cement and six fine sand of 1.25 FM. Mortar in foundation and plinth including supply of all material labour and tools and plants etc. required for proper completion of the work |
| 8 | M-150 Brick work in 1:6 cement and 6 c.sand insuper structure including all material labour T&P gronud floor |
| 9 | 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine 9 sand) including supply of all materials, labour and T & P etc. required for proper completion of the work. |
| 10 | 20 mm cement plaster of mix 1:4 (1 cement: 4 coarse sand) over brick work on outer side including supply of all materials, labour and T & P etc. required for proper completion of the work. |
| 11 | Providing & laying vitrified floor tiles in 600x600mm sizes(thickness to be specified by the manufacturer)with water absorption less than0.08% and conforming to IS: 15622 of approved make in all colours & shades, Size 600 x600 mm |
| 12 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shadeof the slab, including rubbing and polishing complete with base of cement mortar 1:4 (1) cement: 4 coarse sand): 25 mm thick |
| 13 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm. |
| 14 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part 1) non-decorative type Proper completion of the work 32 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 15 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with: 3.8 mm. To 4.7 mm thick glass panes |
| 16 | Wall painting (2 coat) with plastic emulsion paint of approved brand and manufacture on decorative wall surface to give an even shade including thoughly brushing the surface clean of all dirt grease loose pieces and prepared smooth. |
| 17 | Finishing with Premium Acrylic Smooth exterior paint with Silicone additives of required shade (a) New work (Two or more coats applied @ 1.43 Ltr./10 Sqm. over and including bsae coat of water proofing cement paint applied @ 2.20 Kg/10 Sqm.) (b) Extra for applying water proofing cement paint as primer applied @ 2.20 Kg/10 Sqm. instead of primer for exterior finishing. |
| 18 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare even and smooth complet. |
| 19 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand: 6gråded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth |
| 20 | Painting or varnishing on WOOD/Iron works in small areas with one coat of ready mixed priming paint and one coat of approved superior quality mixed paint of clear synthenic varnish including supply of all materiala, labour and T& Petc. |
| 21 | Supply and Fixing of Water cooler of Storage Capacity [Litres] 80, Compressor- Hermetic type, Thermostat Automatically controls temperature, Purification capacity Upto 50 ltrs/hr with RO & UV Pruification as per direction of Engineer in charge |
