Tender For Additional Alteration Of Bldg No P 23 At Danapur Cantt; 1 Taking down cement plaster on wall/ceiling /roof etcincluding raking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed. 2 Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete all as specified and directed. 3 M&L for old size Brick work with sub- class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. 4 M&L brick work with sub class ‘B’ bricks straight or curved on plan to any radius built in CM 1:4 in half brick thick wall complete all as specified and directed. 5 M&L 15mm thick cement plaster on fair faces of brick work or concrete surfaces with cement mortar 1:6 finished even and smooth (without using extra cement) complete all as specified and as directed. 6 M&L for Rendering 15 mm thick in cement mortar 1:4 on concrete surfaces mixed with liquid water proofing compound@ 200 ml/50 kg bag of cement or as per manufacturar instruction finished even and smoothwithout using extra cement over roof slabcomplete all as specified and directed .NOTE: water proofing compound shall be measured and paid seperately. 7 M&L rendering 5 mm thick in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surfaces even and smooth complete all as specified and directed. 8 Excavation in trenches in soft/ loose soil not exc 1.5m wide and not exc 1.5m deep for foundation, pier holes etc n. exc 10sqm on plan and getting out complete all as specified and directed. 9 M&L plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundation, filling and mass concrete complete all as specified and directed. 10 M&L hard core of broken bricks of gauge n exc 63mm deposited, spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface all as specified and directed. 11 M&L 75 mm thick plain cement concrete (1:2:4), type B-0, using 12.50 mm graded stone aggregate as in sub base of floor, sub bases, floor and paving floors including finishing the surface rough for laying kota stone / tiles complete all as specified and directed. 12 M&L 25 mm thick plain cement concrete (1:2:4), type B-0, using 12.50 mm graded stone aggregate as in floors including finishing the surface rough for laying kota stone / tiles complete all as specified and directed. 13 Dismantling of floor, hearth or walls/ roof tiles including cement mortar bedding but not backing and rubbish off permises all as specified. 14 M&L for non skid colouredtiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc over and including15 mm thick screed bed or bedding layer of mortarfor laying floor finishes in CM 1:6for laying of floor tiles, set & jointed in neat cement slurry and pointed with white cement mixed with pigment to match the shade etc.complete all as specified and directed. 15 M&L for 10mm thick Dark shadevitrified ceramic tiles in floors, area of each tile exceeding 0.42 sqm but n exc 1.00 Sqmset & jointed in neat cement slurry & pointed in white cement mixed with pigment to match including screed bed or bedding layer of15mm thick in CM 1:6, complete all as specified & directed. 16 M&L for 10mm thick Dark shade vitrified ceramic tiles area of each tile exceeding 0.42 sqm n exc 1.00 Sqm on vertical surface such as skirtings, dados etc, over & including 10mm thick rendering in cement mortar (1:4) set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified & directed. 17 Supply only water proofing compound (liquid), ISI marked. 18 M&L10 mm thick rendering on roof surfaces/concrete surface in CM 1:4 complete all as specified & directed. 19 M&L Water proofing treatment on Non approachable / non accessible and approachable roof surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer including taking down of existing roof treatment,properly cleaning & drying the concrete surfaces complete all as specified & directed.(i) Applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg / Sqm(ii)Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 kg/ Sqm incl cleaning surfaces.(iii) Laying unrolled over the bitumen coated surface, polymeric water proofing membrane Hyperplas standard weight not less than 3kg /Sqm with 100 mm over laps shall be sealed by flame as per manufacturers instruction.APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified. (iv) Applying two coats of bituminous aluminium paintincluding preparation complete all as specified and as directed. 20 Removal of demolished material up to a distance of 5 km ( out of defence land) complete all as specified and directed. 21 Taking down chowkats or frame with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed. 22 All as per above item no 21 but exc 1.5 Sqm and n.exc. 4 Sqm each. 23 Taking down shutters of any description exc 1.00 Sqmand n exc 2 Sqm each complete all as specified and directed. 24 Supply & Fixing of 1st class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. 25 Supply & Fixing of 30 mm thick engraved moulding Flush shutters on both side ofsolid core constructionfitted to chowkats complete all as specified and directed. 26 Supply & Fixing of 1st class Hardwood Glazed and skeleton shutters, 30mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkat complete all as specified and directed. 27 S&F 100 mm size Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 complete all as specified and directed. 28 S&F 75 mm size Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 complete all as specified and directed. 29 S&F Brass, sliding door bolt 300mm long with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed. 30 S&F 300 mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed as specified. 31 S&F 200 mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts complete all as specified and directed. 32 S&F floor door stopper 140 mm overall length of cover plate of brass body and tongue, anodised. With hard drawn spring, fixed in floor complete all as specified and directed. 33 Demolition of reinforcement cement concrete above the ground floors n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition)such as cooking platform, chajjas etc 34 M & L for providing reinforced cement concrete M-25 Design Mix using 20 mm graded stone aggregate as in column, pillar etc.complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item) 35 M & L for providing reinforced cement concrete M-25 Design Mix using 20 mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5 m sapn and like complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item) 36 M & L for providing reinforced cement concrete M-25 Design Mix using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and like complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item) 37 M & L for providing reinforced cement concrete M-25 Design Mix using 20 mm graded stone aggregate as in Chajjas and like complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item) 38 M & L for use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions in rough finished surface of concrete complete all as specified and directed. 39 M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed. 40 M & L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exc. 200 mm thick horizontal or slopping in rough finished flat surface of concrete complete all as specified and directed. 41 M & L for use and waste of Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete rail ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizon tal or sloping and similar work exc 10cm but n exc 20cm wide in rough finished flat surface of concrete complete all as specified and directed. 42 M&L mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cracking, bending, spirally for hopping for columns hookings ends and binding with and incl mild steel wire (annealed) not less the 0.9mm dia or securing with clips complete all as specified and directed. 43 All as per item No 42 above but 5 mm dia and over in stirrups, spacers and binders complete all as specified and directed. 44 Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 45 Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 46 Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified and directed. 47 Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) 48 S&FStainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. 49 S&F Toughned glass 08mm thick as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed. 50 M&L for applying POP Moulding of (100-150mm) in size for internal wall surface including edges, corners on wall and celing portion as required complete all as specified and directed. 51 M & L Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over one coat of3.00mm putty and including priming coat ofprimer applied @ 0.90 litre/ 10 sqm at all heights complete all as specfied and diretced by eng in charges. 52 M&L for cutting holes in brick wall built in cement mortar for inserting holdfast , walls exc half brick n.exc one brick thick and making good dismantled portion in cement mortar 1:3 complete all as specified and directed. 53 S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening complete all as specified and directed. 54 S&F in repair Factory Made Solid PVC Moulded Door Shutter with particle board core 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed. 55 S&F in repair stainless steel designer curtain rod fancy type curtain rod 20 mm dia including brackets as approved complete all as specified and directed. 56 Taking up or down steel tubing and connections 15mm dia complete all as specified and directed. 57 Taking up or down steel tubing and connections 20mm dia complete all as specified and directed. 58 S&F Tubes, ‘medium grade’ galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors of 15 mm dia complete all as specified and directed. 59 S&F Tubes, ‘medium grade’ galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors of 20 mm dia complete all as specified and directed. 60 Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10 CM girth complete all as specified and directed. 61 S & Fin repair 15 mm dia single leverBasin mixer without popup waste systemincluding all necessary fittings as approved complete all as specified and directed. 62 S&F in repair 15mm dia brass CP wall mixerL Bend with wall flange(Provision for overhead shower) for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. 63 S&F in repairs white vitreous china wash down water closet pan pedestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed. 64 S&F in repair 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe fixed to wall ,complete all as specified and directed. 65 S&F in repair for ABS Health Faucet with 1m Tube & Hook screwed for iron pipe comple all as specified and directed. 66 S&F in repairs PVC connection 15 mm dia size and 450 mm long with 2 Nos brass check nuts its washers complete all as specified and as directed. 67 S&F in repair bib tap 15 mm bore cast copper alloy fancy type chromium plated with capstan head screwed down screwed for iron pipe or for brass ferrule fixed to iron pipe etc. complete all as specified and directed. 68 S&F in repair pillar tap 15 mm bore fancy type chromium plated, cast copper alloy, screwed down, high pressure, with capstan head, with or without lettered HOT or COLD with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. 69 S&F in repair brass CP steel tubular towel rail 20 mm dia D type 60 cm long between flange aluminium anodised complete all as specified and directed. 70 S&F in repair angle cock15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed. 71 S&F in repair two way angle cock 15 mm bore fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed. 72 S & F in reapir chromium plated corner glass shelf with bracketscomplete all as specified and directed. 73 S&F in repair Stainless steel soap dish of size 300 x 150 mm etc fixed to wall with screw complete all as specified and directed. 74 S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and wastes, incl bedding in cement mortar to dwarf wall or incl fixing suitable sizes of cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm, bowl size 410 x 330 x 160 mm complete all as specified and directed. 75 S&F in repair plastic water closet seat cover, Cream / whitecolour, closed pattern with flat bottom and cover and mild steel chromium plated aluminium hinging device for pedestal pattern WC complete all as specified and directed. 76 S & F in reapirchromium plated toilet paper holder with flapcomplete all as specified and directed. 77 M&L for RCC 1:1.5:3 type A-1 (using 20 mm graded stone aggregate)as in kitchen platform, shelvesincluding necessary form work complete all as specified and directed. 78 M&L for 18-20 mm thick granite slab (of any type) work(table rubbed and polished) in cooking platforms, steps, window cills, incl edge moulding & cutting holes for gas pipe through drill machine and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. 79 Taking down PVC/ACpipes upto 110mm bore(including all fittings) with spigot & socket encls & lead joints incl burning out jointscomplete all as specified and directed. 80 S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed. 81 S&F PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed. 82 S&F clamp made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 110mm PVC pipe complete all as specified and directed. 83 M & L PVC(SWR) bend of110 mm dia of any radius etc complete all as specified and directed. 84 M & L PVC(SWR) Tee of110 mm dia etc complete all as specified and directed. 85 S&F PVC (SWR) vent cowl of 110 mm dia complete all as specified and directed. 86 S&F in repair CP/PTMT grating with or without waste hole 100 mm size (ISI Marked) complete all as specified and directed. 87 M&L Pre-cast cement concrete 1:2:4 Type B1 (using 20 mm graded stone aggregate) as in kerb stone block set in cement mortar 1:6,complete all as specified and directed. 88 M&L for Prepation of surface incuding cleaning, repair proper cracks if any, priming the surafce and then applying two coat ofultra damp proof paint for any surface complete all as specified and directed. 89 S&F vitreous china Counter Top Basin of Size: 500x435x180 mm including waste pipe and waste coupling complete all as specified and directed. 90 S & F Vitreous china wash down water closet pan (pedestal pattern )Rimless Bowl With Cistern For Coupled WC With UF Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fitting,Conversion Bend, Fixing Accessories and Accessories Set, Size: 380x610x805mm, S Trap- 250 mm (With Conversion Bend) complete all as specified and directed. 91 S&F 5.5mm thick looking mirror selected quality glassfixed to wall with brass screws, cup and washers including polishing, rounded off edges of glass and drilling holes in glass with led light single buttoncomplete all as specifed and as directed. 92 S&F of stainless steel Soap Dispenser with Glass Bottle of standard size and shape complete all as specified and directed. 93 S&F overhead Shower 120X120mm Square Shape Single Flow(Face Plate Stainless Steel & ABS Body in Chrome finish) with Rubit Cleaning System with CP arms 300 mm long complete all as specified and directed. 94 S&F PVC (SWR) nahani/ floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia etc complete all as specified and directed. 95 Dismantling water tanks and removing to store of capacity exc 250 and n exc 500 ltrs complete all as specified and directed. 96 S&F Rotational moulded polyethylene water storage tanks in white colour tripple layer (cylindrical vertical with closed top) hoistedand fixed in position all as specified in SSR Pt-Iof 500 Ltr capacity complete all as specified and directed. 97 S&F Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminiumrod& high density plastic ball screwed for iron pipe and fixed.(Minimum weight20mm-210gms) complete all as specified and directed. 98 S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore,screwed both ends for iron pipe complete all as specified and directed. 99 Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors complete all as specified and directed. 100 M&L for two coats of weather coat paint (apex) on old/new surfaces of wall including preparation ofplastered surfaces complete all as specified and as directed. 101 Dismantling of tiles/stone slabs of any description or thickness, laid dry or laid dry and pointed in floors, aprons etc 102 M&L for vitrified heavy duty (dura stone) tiles 300x300x7 to 8 mm thick in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed. 103 Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed. 104 Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed. 105 Taking down carefully main switches DBs/ MCB DBs with MCB and making good the disturbed surfaces of wallscomplete all as specified and directed. 106 Taking down carefully copper / aluminium sub mainwiring including teak wood batten / conduit and making good the disturbed surface of walls complete all as specified and directed. 107 Refixing old serviceble any types of lumanirious like Tube light set, ceilling light, building security light etc, C/Fan, E/Fan, wall mounted fan including all necessary fixing accesories, flexible wiring from ceilling rose to items complete all as specified and as directed. Note: Minor repairing likeball bearing, overhaulling for fans, cleaning, nut & bolts, screw etc are including in the rate quoted against this item. 108 M & L for Point wiring with PVC insulated PVC unsheathed electric FRLS cable 1100V grade single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia, with modular box with all conduit accessories in surface wiring or concealed wiring system as per original ground requirement by cutting/chesing of wall and making good disturbed surface of wall with cement mortar and existing colour painting after fixing of conduit & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs for one light/fan point controlled by one switch complete all as specified and as directed. (Note : wiring with 2 X 1.5 sqmm +1 X 1.5 sqmm run with proper colour code as per IE rules measured in one unit ) . 109 All as per item no 108 above but one 5 Amps socket out let point controlled by one switch on same board with other switches. 110 All as per item no 108 above but one 5 Amps socket out let point on independent board controlled by one switch. 111 All as per item no 108 above but wiring with 2.5 Sqmm single core copper conductor for one socket out let 5/15/16 amps point on the independent board. (Note : wiring with 2 X 2.5 sqmm +1 X 2.5 sqmm run with proper colour code as per IE rules measured in one unit) 112 All as per item no 108 above but wiring with 4.0 Sqmm single core copper conductor for one socket out let 15/25 amps point on the independent board.(Note : wiring with 2 X 4.0 sqmm +1 X 4.0 sqmm run with proper colour code as per IE rules measured in one unit) 113 Supply and fixing in repair modular Switch6 Amps single pole, one waycomplete all as specified and directed . 114 Supply and fixing in repair Modular Socket outlet, multi purpose, 5 Pin 6 Amps flush typecomplete all as specified and directed . 115 Supply and fixing in repair Modular Socket outlet, multi purpose, 6 pin 16 Amps universal socketcomplete all as specified and directed . 116 Supply and fixing in repairModularSwitch 16 Amps single pole, one waycomplete all as specified and directed . 117 Supply and fixing in repairmodular fan regulator of four step type compatible with BLDC fan complete all as specified and directed . 118 Supply and fixing in repair white/colour finished single mounting modular plates with inner & outer coversuitable for housing modular accessories suitable for 1 module box complete all as specified and directed 119 All as item no 118 above but suitablefor 2 modules 120 All as item no 118 above but suitablefor 3 modules 121 All as per item no 118above but suitablefor 4 modules 122 All as per item no 118 above but suitablefor 6 modules 123 All as per item no 118 above but suitablefor 8 modules 124 All as per item no 118 above but suitablefor 12 modules 125 S&F Single pole and neutral enclosure 240 volts with a two pin and earth plug and socket complete with and including one single pole MCB 20 Amps complete all as specified and directed. 126 S & F ceiling rose 3 terminal PVC/polycarbonate isolated body type with necessary fittings complete all as specified and directed. 127 Supply, laying, jointing and tesing alluminium unarmoured cable 1100V grade 10 sqmm 4 core in casing caping/ through saddle on wall complete all as specified and directed. 128 Supply, laying, jointing and tesing alluminium unarmoured cable 1100V grade 6 sqmm 4 core in casing caping/ through saddle on wall complete all as specified and directed. . 129 M&L for Sub main wiringPVC insulated PVC unsheathed electric FRLS cable 1100V grade single core having multi stranded copper conductor single phase of size 4.0 Sqmm nominal cross sectional area ( for L & N) & including non metallic rigid PVC conduit ISI marked medium gradewith all conduit accessories in concealed wiring system by cutting/chesing of wall and making good disturbed surface of wall with cement morter and existing colour painting after fixing of conduit & 4.0 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs complete all as specified and directed. (Note : wiring with 2 X 4.0 sqmm +1 X 4.0 sqmm run with proper colour code as per IE rules measured in one unit ) 130 Supply and fixing double door TPN DBs 415 volts rated voltage 4 waypowder coated and suitable for MCBs fitted with bus bar 200 A rated capacity,Neutral link,Earth bar and Din ral & DBs will be fitted concealed in wall / surface as per site requirement complete all as specified and directed. 131 Supply and fixing double door SPN DBs 240 volts rated voltage 12 wayof powder coated DBs suitable for MCBs fitted with bus bar 200 A rated capacity,Neutral link,Earth bar and Din ral & DBs will be fitted concealed in wall / surface as per site requirement complete all as specified and directed. 132 Supply and fixing double door SPN DBs 240 volts rated voltage 08 wayof powder coated DBs suitable for MCBs fitted with bus bar 200 A rated capacity,Neutral link,Earth bar and Din ral & DBs will be fitted concealed in wall / surface as per site requirement complete all as specified and directed. 133 Supply and fixing MCB TPN 100 amps 10 KA,C-series, 415 Voltincluding connection with suitable size aluminium / copper lugs complete all as specified and directed. 134 Supply and fixingMCB SPN 240 volts 40-63 Amps, 10 KA breaking capacity,C type including connection with suitable size aluminium / copper lugs complete all as specified and directed. 135 Supply and fixingMCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity,C type including connection with suitable size aluminium / copper lugs complete all as specified and directed. 136 Supply, laying, jointing & testing in trenches or passing through pipe, 1100 volts grade, XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured LT electric power under ground cables/ wall mounded by clip or concelledby cutting/chesing of wall and making good disturbed surface of wall with cement mortar and existing colour painting after fixing, heavy duty with aluminium conductor of cross sectional area 70 sqmm 3.5 core with all fixing & connecting accessories such as Alluminium cable lugs, cable gland, nut, bolts, washer, clamp etc complete as specified and directed. 137 M&Lfor Rigid non metallic PVC casing capingISI marked, medium grade,not less than 100 mm base size inclusive of all fitting such as tees,bends. Junction boxes, elbows saddleshooks,couples and lock outs etc fixed on surface mounted complete and making good disturbedsurfaces in repairs complete as specified and directed.
