Construction Of 60 Seater Mid Day Meal Dining Hall At Lataguri Boys High School Under Lataguri Gram Panchayat Within Kranti Block
Tender Value
4.21 Lakhs
Estimated cost
Bid Submission
19 Sep 2025
0 days left
EMD
8432
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kranti → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of 60 Seater Mid Day Meal Dining Hall At Lataguri Boys High School Under Lataguri Gram Panchayat Within Kranti Block
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.(a) Depth of excavation not exceeding 1,500 mm.Col Found.Plinth Beam FoundationPlinth Beam Foundation |
| 2 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete.(a) With earth obtained from excavation of foundation.1/5th of foundation |
| 3 | (A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand.Room Area |
| 4 | Cement concrete with 30 mm down graded shingles excluding shuttering. ::N.B. Variety :: In ground floor (1:3:6 proportion)Col Footing BasePlinth Wall FoundationPlinth Wall FoundationFloor AreaPlinth ProtectionStairRamp |
| 5 | Brick work with 1st class bricks in cement mortar (1:6)(a) In foundation and plinth250 mm thick Wall Plinth FoundationStairRamp |
| 6 | Brick work with 1st class bricks in cement mortar (1:6)b) In superstructure, ground floorDining Table Brick ColDining Bench Brick Col |
| 7 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size)excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (ii ) River Bazree :: Ground FloorCol. FootingCol. Trap. SectionCol. CAPPlinth BeamPlinth BeamDining Table TopDining Bench TopLintel-Cum-Tie Beam |
| 8 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns,lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction ofEngineer-In-Charge.Col. CAPPlinth BeamPlinth BeamLintel-Cum-Tie BeamDining Table TopDining Bench Top |
| 9 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction ::: (a) For works in foundation and upto roof of ground floor/upto 4 m ::: (i) Tor steel/Mild Steel ::: I. SAIL/ TATA/RINLI. SAIL/ TATA/RINL |
| 10 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.Ground Floor Peripherial Wall |
| 11 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] :: With 1:4 cement mortar :: 20 mm thick plasterHall Inside & Out sideLintel-Cum-Tie BeamHall Out side PlinthDining Table Brick ColDining Bench Brick ColRCC Col openingPlinth ProtectionStairRamp |
| 12 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour.In ground floor. 3 mm. thick topping (High polishing grinding on this item isnot permitted with ordinary cement).Using grey cement:: i)25 mm. thickHall Room |
| 13 | Neat cement punning about 1.5mm thick in wall, Neat cement punning about1.5mm thick in wall, dado, window,sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m.Hall Out side PlinthPlinth ProtectionDining Table Brick ColDining Bench Brick ColStairRamp |
| 14 | (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.(i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.OpeningOpeningOpeningOpeningMS GateMS Gate |
| 15 | Anodised aluminium Aldrop / Sliding bolts of approved quality manufactgured from extruded section conforming to IS specification (I.S 2681/66) fitted and fixed complete(iii) 300mm long x 16mm dia bolt |
| 16 | Supplying fitting and fixing UPVC pipes A - type and fittings conforming to IS 13592-1992 with necessary clamos nails including making holes in walls, etc and cutting trenches in any soil through masonry concrete structure etc if necessary and mending good damages including jointing with jorntingmaterials ( Spun yarn, valamoid / bitumen / M seal etc ) completeA) UPVC Pipes ::(ii) 110 mm Dia ::::::: L.S. |
| 17 | Supplying fitting and fixing UPVC pipes A - type and fittings conforming to IS 13592-1992 with necessary clamos nails including making holes in walls, etc and cutting trenches in any soil through masonry concrete structure etc if necessary and mending good damages including jointing with jorntingmaterials ( Spun yarn, valamoid / bitumen / M seal etc ) completeB) UPVC fittings ::c) Bend 87 5 degree (ii) 110mm |
| 18 | a)Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.OpeningOpeningOpeningOpeningMS GateMS Gate |
| 19 | (b) On steel or other metal surface :: (iv) Two coats (with any shade except white)OpeningOpeningOpeningOpeningMS GateMS Gate |
| 20 | M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in- Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete.The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete.Payment to be made on the basis of calculated weight of structural memebrs of MS Holow Section as specified in relevent IS code in finished work.Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a hight of erection 8 m. / 2nd floor level from the ground. Add1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8m. or part thereof.i) For roof truss works :: a) Span up to 12 Mtr |
| 21 | Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work)(GCI sheet to be supplied by contractor) :: (i) In Roof:- :: a) With 0.60 mm thick sheet |
| 22 | Galvanised iron sheet ridging fitted with necessary bolts, screws, washers etc complete.(225mm end lapping) :: (A) 300 mm lapping each way(a) With 0.60 mm sheet |
| 23 | Galvanised plain sheet works (excluding supporting framework) fitted and fixed with 6 mm. dia J or L hook-bolts and nuts, sheet-bolts, limpet and bitumen washers and putty with 150 mm. end lap & 50 mm minimum side lap complete. :: (b) In wall: with 0.63 mm. sheetsTriangular Portion |
| 24 | White washing including cleaning and smoothening surface thoroughly(c) Three coats (on new works only).All floors : :: (c) Three coats (on new works only)Plastered Area :: Ref Item 13 - Item 16 (NCP Area) |
| 25 | Colour washing with any shade with Stainers, as required including cleaning and smoothening surface thoroughly :Border Blue Colour at Col., Lintel |
| 26 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and \" floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (A) Floor :: With Sand Cement Mortar (1 4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0 20kg/Sq.m. :: (a) Area of each tile upto 0.09 Sq m :: (ii) Other than Coloured decorative including whiteDining Table TopDining Bench Top |
| 27 | Add:- GST @ 18% |
| 28 | Add:- Labour Welfare Cess @ 1% |
AI Tender Summary
Tender Timeline
Sep 04, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedSep 19, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 22, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender