Tender For Provn Of Certain Sanction Works At Af Station Palam; 1 M&L for brick work with sub class `B bricks, straight or curved on plan exc. 6m mean radius built in cement mortar (1:6) complete all as specified and as directed. 2 M&L for brick work with subclass B brick half brick thick wall straight or curved on plan exc.6m mean radius built in cement mortar (1:4) complete all as specified and as directed. 3 M&L for cement concrete (1:2:4) type B-1, (using 20 mm graded stone aggregate) as in copings, kerb stone for foot path and similar items with plain fair finishing including chamfers, weathering, throating etc and set in CM (1:4) complete joints to match including necessary use and waste of formwork complete all as specified and as directed. 4 S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes;framed guard bars;barred iron doors; ladders; framedbalusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. 5 M&L for preparation of new or previously untreated surfaces of steel of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over & including a coat of red oxide primer complete all as specified and as directed. 6 M& L for providing 100mm thick precast cement concrete cover slab (1:2:4) type B1,(using 20mm graded stone aggreagates) set in CM (1:4) for man holes, drain etc.with and including necessary use and waste of formwork complete all as specified and as direcetd. Note - (a) Cover slab edges shall be protected alround with steel strip of size (100x2) mm. (b) Mild steel TMT bars shall be measured and paid separately under this schedule. 7 M&L for milld steel TMT bars 10mm dia and over cut to length, bent to shape required,,including cracking, bending etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed. 8 S&F in repairs, SFRC MH Frame with cover of size (600mm x600mm) x 70mm thick surrounded with steel strip (70x2)mm reinforced as per manufacturers design and proccess laid over existing drain complete all as specified and as directed by Engr-in-Charge. Notes: - (i) Make of SFRC Manhole/drain cover and frame shall be:- (a) M/s PS Concrete.(b) M/s KK Manhole. Or equivalent 9 S&F in repair 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls with and including suitable PVC clamps complete all as specified and as directed. 10 Excavation in trenches for n exc 1.50 mtr width but n exc 1.50mtr depth for foundation not exc. 10 sqm on plan and n exc 1.50mtr in depth including getting out in soft/loose soil complete all as specified and as directed. 11 Returning, filling in, including spreading, levelling , watering and well ramming in layersnot exc. 25 cm thick with soils complete all as specified and as directed. 12 Removal of excavated material to a distance not exc. 500m and depositing where directed at a level n exc 1.50m above the starting point complete all as specified and as directed. 13 M&L forcement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed. 14 M&L for brick work with sub class `B bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:4) omplete all as specified and as directed. 15 M&L for flush pointing on new or old brick work as in drain vertical and flat surfaces using cement motar (1:3) complete all as specified and as directed. 16 M&L for cement concrete (1:2:4) type B-2, (using 40 mm graded stone aggregate) as in surface channels and drains complete all as specified and as directed. 17 Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed. 18 M&L for 15mm thick rendering in cement mortar (1:4) by using manufactured /washed stone yellow/grey sand for plaster on fair faces of brick or concrete surfaces on walls including finishing surface even and fair without using extra cement complete all as specified and as directed. Note for ser item No. 17.00 & 18.00:- The work shall be carried out upto four storey therefore necessary arrangment and scaffolding with all safety measures shall be deemed to be included in unit rates. 19 M&L for 15mm thick rendering in cement mortar (1:6) by using manufactured /washed stone yellow/grey sand for plaster on fair faces of brick or concrete surfaces on walls including finishing surface even and smooth without using extra cement complete all as specified and as directed. 20 M&L for preparing new plasteredwall surface and apply two coat of exterior emulsion paint 100% acrylic of approved colour over a coat of primer over and including1 to 2 mm thick cement base wall care putty complete all as specified and as directed by Engineer-in-charge.Note for ser item No. 20.00:- The work shall be carried out upto four storey therefore necessary arrangment and scaffolding with all safety measures shall be deemed to be included in unit rates. 21 M&L for framed MS work as in doors or gates of angle or other section with guesset plates, rails braces etc, complete drilling for fitting steel sheeting or other covering door etc to be prepared for hinging or sliding and including either hooks and hinges or steel hanging door fittings also fastening and fixing complete all as specified and as directed . 22 M&L for mild steel black sheet in door 1.60 mm thick in steel gate and similar work cut to size, holes punched, incl round headed screwed cut nails or revets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams including or turning up, mitred complete all as specified and as directed . 23 M&L for machine cut Kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with and including over 20 mm thick screed bed with CM (1:6) complete all as specified and as directed. 24 S&F Providing & fixing false ceiling at all heights with GRG (Glass Fibre With Semiperforated 12mm Size 595 x 595 mm of approved texture, 12mm thick thick micro tegular design and patterns having moisture micro tegular edged or 1 0 mm content less than 2%, humidity resistanceedged GRG thick square edged of 99%, NRC0.50 to 0.75 as per IS false ceiling GRG false ceiling all as specified and directed 8225:1987, Noncombustible as per BS tiles tiles 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of hength 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmmength and Lshape level adjuster of size 85x25x2mm.Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre includingHangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat (40 x 3)mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed. 25 Excavating post holes or similar holes, each not exceeding 0.5 Cum, getting out in soft/ loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm thick, watering, and removing surplus soil to a distance n. exc 50m and making good surface complete all as specified and as directed. 26 S&F pre paintedgalvalume aluminiumzinc coatingGI based corrugatedsteel sheet0.50 mmthickof ancolourhavingtensilestrengthof 550Mpa as in roof covering/cladding to fix the wall fixed with self taping screws complete all as specified and as directed. 27 M&L for 60mmthick machine pressed precast glossy finish concrete interlocking paver blockofM-35 with grey cement & pigment with andincluding over 75mm thick cement concrete (1:3:6) type C-2, (using 40 mm graded stone aggregate) as in sub base with and including over 50mm thick sand filling complete all as specified and as directed. 28 S&F 4mm dia plain mild steel wire, galvanised class 3, in mosquito nets and fixing to straining bolts, hooks, eyes, etc. including straining and fixing to concrete or brick walls and/or to straining bolts, galvanised iron staples etc. complete all as specified and as directed. Note:- Each line of wire to be measured. 29 S&F straining bolts/anchor bolts with screwed ends, nuts, washers and mild steel plates for walls, chimneys, roofs, arches, etc. king rods conforming to Fe290 Gde-E-165 including drilling and fixing to stone/concrete/brick walls complete all as specified and as directed. 30 S&F stainless steel chromium plated 8 pin, not less than 45Cm long cloth hanger fixed to stone/concrete/brick walls with screws complete all as specified and as directed by Engr-in-Charge. 31 Demolition of cement concrete (un reinforced) as in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed by Engr-in-Charge. 32 Demolition of brick work/ stone masonry built in cement or cement lime mortar including all quoins, arches, pillars etc of any description including removing the debris from site to outside MoD land complete all as specified and as directed. 33 M&L for75mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base etc complete all as specified and as directed. 34 M&L for50mm thick PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in sub base etc complete all as specified and as directed. 35 S&F10 to 15 mm thick rubber tiles with fabric backing or insert, plain coloured or with marbled finish for flooring including adhesive for setting rubber tiles complete all as specified and as directed. 36 M&L for preparing new plastered surfaces of wall andapplying twocoats of oil bounddistemper over a coat of primer complete all as specified and as directed. 37 M&L for preparation of newly plastered surfaces of walls and applyingtwocoatsofexterior emulsion paint over a coat of primer complete all as specified and as directed. 38 M&Lfor complete removalofexisting treatmentof old decorated external surface of walls by electrically operated grinder and applyingtwocoatsofexterior emulsion paint over a coat of primer including preparation of surfaces and necessary scaffolding complete all as specified and as directed. 39 M&L for complete removal of existing treatment of old plasteredsurfaces on walls including brooming down or steel wire brushing, scraping down and applying two coats ofdistemper oil emulsion over one coat of alkalic resistent primer complete all as specified and as directed. 40 Taking down Chowkats or frames with shutters (Without taking off shutters from the frames) area not exceeding 1.5 Sqm each complete all as specified and as directed. 41 Taking down Chowkats or frames with shutters (Without taking off shutters from the frames) area exc 1.5 sqm but not exceeding 4.0 Sqm each complete all as specified and as directed. 42 S&F in replacement of steel window box type made of ERW hollow section of size 130mm x 65mm x 1.25mm thick double rebate comprises gauged and glazes sekeleton shutter ERW Secton 50mm x 20mm x 1mm thick double shutter with leaf and arrangments for cooler operning including iron gril bar with 12mm square complete weldded to frame with vertical muilon of size 130mmx65mm with 1.25mm thick ERW box typer including holes cutting holes for hold fast (04 Nos each window) and making good dismantled protion with PCC (1:2:4) type B-1 including following fittings welded to frame / shutter :- (a) Hold fast of 150mm long of flat iron 25mmx3mm made to shape-04 Nos each window. (b) MS Handle cold rolled of size 100mm long - 01 No per leaf (c) MS Tower bolt 100mm long- 02No per leaf(d) Z-section 20mmx25mm long stopper - 01No per leaf. (e) MS pintal hinges of size 40mmx25mm -2 Nos per leaf including one coat of red oxied shop primer complete all as specified and as directed. (Note : Wire mesh, sheet glass, painting etc shall be measured & paid separately under respective items). 43 S&F sheet glass4mm thick ordinary qualityfixing to steel/aluminiumwindow shutters in any position with new beads/ steel section as required for securing complete all as specified and as directed. 44 S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apertupre 1.40mm and fixedwith tinned tacks or galvanised wire staples complete all as specified and as directed. 45 M&L for mild steel black sheet in door 1.0 mm thick in steel gate and similar work cut to size, holes punched, incl round headed screwed cut nails or revets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams including or turning up, mitred complete all as specified and as directed . 46 Dismantling AC/CGI corrugated steel sheeting any gauge thickness including Nainital or similar pattern roof coverings, complete all as specified andas directed by Engineer-in-charge. 47 S&F pre paintedgalvalume aluminiumzinc coatingGI based plain steel sheet0.50 mmthickof ancolourhavingtensilestrengthof 550Mpa as in roof covering/cladding to fix the wall fixed with self taping screws complete all as specified and as directed. 48 Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. 49 S&F mild steel work such as truss, purlins,rafterhand rail, half round or other steel section for baluster running bars for angle iron including bending and welding angles, as necessary,gusset plates, riveting, etc complete all as specified. 50 M & L for Cement concrete 1:3:6 type C2 using 20mm graded stone aggregate in plinth protection, 75 mm thick, finished even and smooth without using extra cement, including making joints 12 mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen85/25and sand inthe proportion of (1:3 ) by weight complete all as spcified and as directed. 51 M & L 80mm thick machine pressed with grey cement andpigment interlocking factory made paver blocks of any size and shape conforming to IS 15658-2006, M-40, set, includingpointed in dry sand over 25 mm thick sand cushion complete all as spcified and as directed. 52 Dismantling floor, hearth or wall tiling including cement mortar bedding and removing debries off the premises complete all as spcified and as directed. 53 M&Lfor10mm thickcement plater in cement mortar( 1:3)as on ceiling, surface finished even & smooth without using extra cement complete all as spcified and as directed. 54 M&L for 15mm thick rendering in cement mortar (1:4) mixed with water proofing compound on fair faces of brick or concrete surfaces on walls including finishing surface even and smooth without using extra cement complete all as specified and as directed. Note:- Water proofing compound shall be measured and paid in respective item of BOQ. 55 M&L forpreparation of newplastered surfaces of ceiling surface and applyingtwocoats of oil bounddistemper over a coat of primercompleteall as specified andasdirected. 56 M&Lfor providing 2mm thick cement base wall care putty over plastered surface to prepare the surface even and smooth completeall as specified and as directed. 57 M&Lfor preparing new plastered external surface of wallsincluding necessary scaffolding etc and applyingtwocoatsofexterior emulsion paint over a coat of primer etc completeall as specified and as directed. 58 M&L for 25mm thick cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in flooretc complete all asspecified and as directed. 59 M&L for glazed ceramic coloured tiles as in vertical surface of size (450x 350)mm x 7mm thick/ (350x250)mm x7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match with and including 10 mm thick renderingCM (1: 4) as on vertical surfaces such as skirting, dados, etc complete all as specified and as directed. 60 M&L for non- skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with ans including 15mm thick screed bed in CM (1:6) complete all as specified and as directed. 61 M&L forlight shadevitrified ceramictiles 10 mm thick (square/rectangular) area of each tilesnexc 0..36 sqm as in flooring& skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed. 62 M&L for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed. 63 S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC `C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stliles and rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and drawing. 64 S&F butt hinges, 100mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and as directed. 65 S&F aluminium anodised, barrel tower bolts of extruded section and fixed 150mm complete all as specified and as directed. 66 S&F cast type anodised aluminium handles of size 150 mm complete all as specified and as directed. 67 S&F 300mm long aluminium alloy, anodized, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed withscrews complete all as specified and as directed. 68 S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including alljoining cleat for fixing etc. complete all as specified and directed. 69 S & F power coated aluminium window and ventlator shutters sliding type, aluminium section weighing 0.55 kg/m includingall necessary joining cleats, glazing cips rubber packing anodised aluminium snap beading screws anodised aluminium fittings complete all as specified and directed. 70 S&F 5.50mm thick tinted, sheet glass of selected qualityfixed to aluminium frame workcomplete all as specified and directed. 71 Taking up or down 15 mm bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed. 72 Taking up or down 20 mm bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed. 73 S&F tubes, medium grade 15mm bore galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. 74 S&F tubes, medium grade 20mm bore galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. 75 M&L for cuting holes in brick walls exc half brick but n.exc one brick, built in cement mortar for fixing holdfasts in jambs of existing opening and making good, complete all as specified and directed. 76 S&F in repairs 15 mm bore bib taps, cast copper, chromium plated fancy type, long/ short body screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. 77 S& F in repairs 15 mm bore of fancy type concealed stop cock cast copper alloy screws down high pressure screw both ends for iron pipe or for union all as fixed complete all as specified and directed. 78 S&F in repair CP Soap dishcomplete all as specified and directed. Make-AKP-35731P of Jaquar or equvelent in kohler. 79 S&F in repairs15 mm two in one angle valve chromium plated with wall flangeand fancy typewithhigh pressure screwed down and with CP flange of same make complete all as specified and directed. 80 S&F in repairs vitreous china wash down water closet pan (pedestal pattern), and trap white (excluding flushing cistern and seat cover) including connection to drain (or outgoing pipe) and to fushing pipe, antisyphonage pipe etc complete all as specified and directed by Engineer-in-Charge. 81 S&F in repairs, 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all specified and as directed by Engr-in-Charge. 82 S&F in repairs 15mm bore anglecock, chromium plated screwed down, high pressure, with crutch or butterfly handles, screwed both ends for iron pipe or for unions and fixed all specified and as directed by Engr-in-Charge. 83 S&F in repair health faucet with double lock 1 meter brass plated stainless steel flexible hose and wall hook complete all as specified and directedMake -Jaquar , Cat Part-No - 563 or equivalent in Kohler. 84 S & F in repair CP paper holdercomplete all as specified and directed. Make-AKP-35751P of Jaquar or equvelent in kohler. 85 S&F in repairs, PVC connections 15mm size with PTMT nuts of length 600 mm and fixed all as specified and as directed by Engr-in-Charge. 86 S&F inrepair plastic water closet seat cover, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engineer-in-Charge 87 S&F in repair 610 mm long PVC waste pipe flexible type 25 mm dia suitable for couplings 32 mm & 40 mm dia complete all as specified and directed by Engineer-in-Charge 88 S&F in repairs, wash hand basins vitreous china flat back 450mmx300mm size white, first quality, with and including chromium platedwaste coupling 32mm size, PVC waste pipe 25mm bore heavy duty China and plug and porcelain stopper, brackets of Mild Steelangle iron (35mmx35mmx5mm) of suitable size including two coat of synthetic enamel paint over a coat of primer over angle iron brackets complete to walls all specified and as directed by Engr-in-charge. 89 S&F in repair 600 x450 mm fancy typeor bevelled edge mirror of selected quality glass, mounted on 6mm thick ACbuilding board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. 90 S&F in repairs elegent mirror PVC cabinet colouredwith towel rail of size 422 x 622 mm complete all as specified and as directed.( Make : Prayag/ISI Marked). 91 S&Fin repairs, cast iron Nahani trap with CP grating including jointing with cement joint to waste pipe of 75mm dia fixed in cement concrete type B-1(1:2:4) complete all asspecified and directed byEngr-in-Charge. 92 S&F in repairs Cast iron floor trap with CP grating including jointing to wastepipe withrun lead, dia of outlet 100mm set in cement concrete type B1 (1:2:4) complete all asspecified and directed byEngr-in-Charge. 93 Dismantling of cast iron pipe 75/100 mm dia joint in cement mortars and taking out of trench if required complete all asspecified and directed byEngr-in-Charge. 94 S & F in repairs Cast iron soil, waste and vent pipe in any length with or without ears, with cement joints, laid in treanches or in floors of 75 mm dia complete all as specified and directed. 95 S & F in repairs CI Bends (any radius ), diminishing pieces or tapers of 75 mm dia fitted with oval access door complete all as specified. 96 S&F in repair PVC flushing cistern of 10 ltrs capacity valveless, syphonic action type,low level, white with inlet, ball valve, float and handle including brackets and PVC flush pipe of 32 mm bore and connection to pipes etc complete all as specified and directed by Engineer-in-Charge. 97 Dismantling of ceiling /wall panelling including frame work and board complete all as specified and directed by Engr-in-Charge. 98 M &L forPVC profile for wall panellingcolour / shade as approvedsize 250mm wide, 08 mm over all thick with 1 mm wall thickness fixed with screw to mild steel square ( size 20mmx 20mmx 1mm thick) tubler frame work including one coat of red oxide primer, fixed to walls complete all as specified and directed by Engr-in-Charge. 99 M&L for PVC profile corner beading L/T type for wall panelling, colour/shade matching with wall panelling complete all as specified and as directed. 100 Material and labour for false ceilings using GI sanp grid system with rool-ormed out of hot drip galvanised steel capings (Powder coated) main runner 38x24mm, cross Tee 29x24mm and wall angle 24x24mm members suspended with 4mm dia GI wire, carry maximum load up to 8.10 Kg/Sqm with 4mm thick designer ceilimg board, prepainted cement fibre board size 595x595x4mm thick any texture (Lake, Hill, ocean cascade or Electra ) suspended from from RCC roof/ structural members of soofitsangle cleat cut out etc to ther equired line and shape as per manufactureres recommndations at any height complete all as specified and as directed by GE, Everest ceiling andgrid system Regular T-2430 or its equivalent Make of Ramco/Charminar/Armstrong 101 S&F BLDC ceiling fans complete with blades, down rods, electronic fan regulator & accessories 230V, 1200mm sweep, 210 cfm minimum air delivery with service value of 6 BEE and 5 star rated complete all as specified and directed. Make- Bajaj cat No ENERGOS 26 1200 MM glossy white or equivalent in make Ortem/Osram/Anchor 102 Dismantling & taking out carefully existing ceiling fan of any size and removing the old fan rod and supply & fixing new Anti suicide rod/smart fan rod of length 10 any colour to match with the existing having following specifications :- (i) Thickness of rod=1.84( + 0.05)mmon zinc plated MP pipe with zinc plated spring mechanism (ii) MSME tested for 15 Kg weight bearing capacity & breaking at impact load of 22 Kg+ (iii) The fan rod opens from its centre & spring hidden in pipe, expands to land on ground safely complete all as specified and directed. Make:- GOLD LIFE or equivalent as approved by GE 103 Supply and fixing ofelectric water heater, storage type ABS body type with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc including steel braided flexible connection for pipe of size 15mm bore with GI hexagonal adopters/Nuts on both sides for inlet ( cold water supply) and out let (hot water supply), provision of wall mounting arrangement , mounted on wall with suitable size of anchor bolts, making connection including testing complete all as specified and directed. 104 M & L for sub Main Wiring with two single core FRLS PVC insulated unsheathed multistranded flexible copper conductor cable of size size 2x2.5 Sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 2.5 Sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in and including suitable size concealed rigid medium grade PVC conduit not less than 20mm dia 1.5mm thickwith all accessories incl cutting chases on wall andmaking good to the disturbed surface of wall with cement mortar 1:4 and finishes to match existing surface complete all as specified and directed. 105 S&F of socket PVC plastic body with 20 amp MCB single pole, 240 volts, 10KA, B type complete all as specified and directed by Engr-in-Charge. 106 S & F stop valve 15mm dia, fency type chromium plated , screwed down, high pressure with crutch , screwed for iron pipe or for ferrule ISI marked omplete all as specified and as directed. 107 S&F bib cock brass chromium plated fency type screwed down for size 15mm dia pipe ISI marked omplete all as specified and as directed. 108 S&F of heavy duty PVC connecting pipe with brass adapters 450 mm long suitable for 15 mm dia pipe and fixing in position complete all as specified and as directed by Engr-in-charge. 109 S&F of suitable fastener for geyser on wall andmaking good to the disturbed surface of wall with cement mortar 1:4 and finishes to match existing surface complete all as specified and as directed by Engr-in-Charge. 110 S&F of geyser hot water connection pipe SS304 braided 450mm long with two brass nut & nylon washer suitable for 15mm dia pipe complete all as specified and directed by Engineer-in-charge. 111 Material and labour for point wiring with single corePVC sheathed 1100 volt grade cable with multi stranded copper conductor of size 1.5 Sq mm FRLSH (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI markednot less than 20mm dia, with GI saddles GI screws, rawl plugs (concealed conduit/surface wiring in walls and casing capping on ceiling or roof ) including Tee, Junction boxes and provision of3 mm thick plastic laminated sheet cover of suitable size on existing terminal boxes with new brass screwsfor mounting switches sockets and regulators and drawing continuous earth wire with and including PVC sheathed 1100 Volts grade cable with strandedcopper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified for one light/Fan point controlled by one Switch complete all as specified and as directed.Note :- (i) Cost for cutting, chasing and making good to existing surfaces shall deemed to be included in the quoted rate. 112 S&F modular metal box flush box one module complete all as specified and as directed. 113 S&F modular white cover plate with frame one module complete all as specified and as directed. 114 S&F modular switch 1 way 6 Amps one module complete all as specified and as directed. 115 Supply and fixing for ceiling rose, surface type, 65mm x 50mm, 2 to 3 terminal complete all as specified and as directed. 116 S&F exhaust fan, Steel body heavy duty with louvers complete of sweep size 300mm, 900 RPM, copper winding single phase motor, with bolts, nuts and washers, size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/00.0076 three core from celling rose to exhaust fan for giving connection complete all as specified along with mosquito jail on wall complete all as specified and as directed. 117 S&F PVC ventilation fan, with louvers shutter of sweep size 230/250mm, single phase, embedded in the wall/window including provision of PVC flexible copper cable from ceiling rose to exhaust fan for giving connection along with mosquito jail on wall/window complete all as specified and as directed. 118 M&L for cutting hole in wall for fixing of exhaust fans, ventillation fans of size upto 300mm & making good the distributed surface, grouting nuts for fixing of Exhaust fans, ventilation fans complete all as specified and directed.
