Tender For Replacement Of Lt Oh Conductor With Ug Cables At Certain Areas Under Ge (N) Akhnoor; 1 Dismantling and taking down of Cross arms of MS channels or angle section complete all as directed. 2 Dismantling and taking down old insulator any type and size for 11000 Volts grade all as directed. 3 Dismantling and taking down old Aluminium conductor steel reinforced any type and size all as directed 4 Taking down old unserviceable anti climbing devices from pole complete all as directed. 5 Dismantling of old unserviceable house service bracket any type & size all as directed. 6 Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth and getting out in soft/ loose soil all as specified and directed. 7 Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth and getting out but in hard/ dense soil all as specified and directed. 8 Returning filling in including spreadingwateringand well ramming in layers not exc25cmcomplete all as specifed. 9 Removing surplus soilto distance not exceeding50 m and depositing where directed at a level notexceeding 1.5 m above the starting pointcomplete all asspecifiedand directed. 10 Supply, Laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10.0 sqmm 4 core complete all as specified and directed 11 -Ditto- all as per Srl item No-10 here-in-before but 16 Sqmm 4 core 12 -Ditto- all as per Srl item No-10 here-in-before but 25 Sqmm 4 core 13 -Ditto- all as per Srl item No-10 here-in-before but 35 Sqmm 3.5 core 14 -Ditto- all as per Srl item No-10 here-in-before but 50 Sqmm 3.5 core 15 -Ditto- all as per Srl item No-10 here-in-before but 70 Sqmm 3.5 core 16 -Ditto- all as per Srl item No-10 here-in-before but 95 Sqmm 3.5 core 17 -Ditto- all as per Srl item No-10 here-in-before but 120 Sqmm 3.5 core 18 -Ditto- all as per Srl item No-10 here-in-before but 150 Sqmm 3.5 core 19 -Ditto- all as per Srl item No-10 here-in-before but 185 Sqmm 3.5 core 20 -Ditto- all as per Srl item No-10 here-in-before but 240 Sqmm 3.5 core 21 Cable Route Indicator made out of CI plate 80 dia, 6mm thick & fixed over M.S angle iron of size 30 x 30 x 6mm, 45 cm in length duly painted with synthetic enamel BLUE paint suitable for LT cable all as specified & including embeded in block of PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) of size 30x30x20 cm in ground complete all as specified and directed. 22 Road cutting including making good with PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) complete all as specified and directed 23 Cable jointing kit for 1.1 KV grade cable for straight through joint complete with jointing material heat shrink type and accessories suitable for 3.5/4 core XLPE, armoured, AI conductor cable of size 16 to 35 Sqmm complete all as specified and directed 24 Cable jointing kit for 1.1 KV grade cable for straight through joint complete with jointing material heat shrink type and accessories suitable for 3.5/4 core XLPE, armoured, AI conductor cable of size 50 to 95 Sqmm complete all as specified and directed 25 Cable jointing kit for 1.1 KV grade cable for straight through joint complete with jointing material heat shrink type and accessories suitable for 3.5/4 core XLPE, armoured, AI conductor cable of size 120 to 185 Sqmm complete all as specified and directed 26 Cable jointing kit for 1.1 KV grade cable for straight through joint complete with jointing material heat shrink type and accessories suitable for 3.5/4 core XLPE, armoured, AI conductor cable of size 240 to 300 Sqmm complete all as specified and directed 27 GI pipe 40 mm bore light grade for protection of cable including fixing along pipe, along pole/laid under the road/laid under the floor complete all as specified and directed. 28 GI pipe 50 mm bore light grade for protection of cable including fixing along pipe,along pole/laid under the road/laid under the floor complete all as specified and directed. 29 GI pipe 80 mm bore light grade for protection of cable including fixing along pipe, fixed along pole/laid under the road/laid under the floor complete all as specified and directed. 30 Dismantling of old UNSV Earthing complete and supplyand fixing of new earthing complete with galvanised steel earth plate electrode 600mmx600mmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground) with top edge of plate not less than 1.5m below normal ground level connecting to the GI erthing strip 32x6mm by means of bolts, nuts check nuts and washers of galvanised iron and GI Strip 32x6mm protected by provision of GI Light grade pipe of 40mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 40mm grade crushed stone aggregrate iwh 40mm thick cover of RCC (1:2:4) raniforced with PM (weight not less than 4Kg/sqmm) and frame of angle iron 25x25x6mm with lugs 02 Nos and 6mm dia MS bars handle made to shape, GI Light grade 20mm bore pipe for watering perforated at bottom 1.75m long placed on top edge for earth platem common salt and charcoal filling, test point made out of 75x50x6mm phodphorous bronze with fixing arrangement, funnel, wire mesh and earth work in hand/ dense soil filling in andremoval of surplus soil to a distance not exceeding 50m all as per electrical plate No-03 of SSR 1991 Pt-I and connecting to earh test point incl testing on completion, complete all as specified. 31 Supply, Installation, testing & commissioning of self supporting totally enclosed LT out door type feeder pillar box of size 1500x1200x600mm. Panels shall be suitable for 415V, 3 phase, 4 wire, 50 Hz supply system and lifting hooks shall also be provided in case of large panels, degree of ingress protection of IP-65, manufactured by CPRI approved manufacturer whose panel has been tested during last ten years made out of 3.15mm thick CRCA sheet and built upon rigid frame work having front and rear hinged dooers, earthing strip point and bottom detachable gland plate complete with suitable size of Zinc/Chromium plated and nuts, bolts and washers etc. The panel shall be synthetic enameled painted panel door should be both side opening alongwith locking arrangement both side. The panel shall be embedded with 50 x 6 mm MS angle Iron frame amd 30 cm above the normal ground level complete with PCC foundation (1:2:4) type B-2 comprising of the following:- (a) Aluminium bus bars 400 Amp-04 Nos, supported with suitable size of heavy duty porcelain stand lock with suitable size of brass nut, bolts and washer with heat shrinkable PVC sleevingh. The bar shall be colour coded (Red, Yellow and Blue) for three phases and black for neutral(b) MCCB 300 Amps 4 pole, 415 Volt, 36 KA Breaking capacity duly connected to bus bar (As in coming)- 01 No. Make: Legrand/Havells/Schneider/ABB (c)MCCB 100 Amps 4 pole, 415 Volt, 36 KA Breaking capacity duly connected to bus bar (As outgoing)- 02 No. Make: Legrand/Havells/Schneider/ABB (d)MCCB 63 Amps TPN, 415 Volt, 25 KA Breaking capacity duly connected to bus bar (As outgoing)- 03 Nos. Make: Legrand/Havells/Schneider/ABB. (e)MCCB 32 Amps TPN, 415 Volt, 25 KA Breaking capacity duly connected to bus bar (As outgoing)- 05 Nos. Make: Legrand/Havells/Schneider/ABB. 32 Supply, Installation, testing & commissioning of self supporting totally enclosed LT out door type feeder pillar box of size 1500x1200x600mm. Panels shall be suitable for 415V, 3 phase, 4 wire, 50 Hz supply system and lifting hooks shall also be provided in case of large panels, degree of ingress protection of IP-65, manufactured by CPRI approved manufacturer whose panel has been tested during last ten years made out of 3.15mm thick CRCA sheet and built upon rigid frame work having front and rear hinged dooers, earthing strip point and bottom detachable gland plate complete with suitable size of Zinc/Chromium plated and nuts, bolts and washers etc. The panel shall be synthetic enameled painted panel door should be both side opening alongwith locking arrangement both side. The panel shall be embedded with 50 x 6 mm MS angle Iron frame amd 30 cm above the normal ground level complete with PCC foundation (1:2:4) type B-2 comprising of the following. (a) Aluminium bus bars 200 Amp-04 Nos, supported with suitable size of heavy duty porcelain stand lock with suitable size of brass nut, bolts and washer with heat shrinkable PVC sleevingh. The bar shall be colour coded (Red, Yellow and Blue) for three phases and black for neutral (b)MCCB 100 Amps 4 pole, 415 Volt, 36 KA Breaking capacity duly connected to bus bar (As in coming)-01No.Make:Legrand/Havells/Schneider/ABB. (c)MCCB 63 Amps TPN, 415 Volt, 25 KA Breaking capacity duly connected to bus bar (As outgoing)- 02 Nos. Make: Legrand/Havells/Schneider/ABB. (d)MCCB 32 Amps TPN, 415 Volt, 25 KA Breaking capacity duly connected to bus bar (As outgoing)- 06 Nos. Make: Legrand/Havells/Schneider/ABB. 33 Supply, fabrication and fixing feeder pillarbox of size 900x 550x900 mmmade out of MS sheet of 3.15 mm thick bent to shape & size factory made with welding, bending works suitable for including 300 Amps rated copper bus bars (length of bus bar not less than 45 cm) in 4 Nos ,makingholes of any size and mounted on porcelain/epoxy based post insulators of appropriate size with suitable size of nuts, bolts and washers. The panel should be manfactured by CPRI approved manufacturer whose panel has been tested during last ten years with IP 65 protection. The panel shall be embedded with 50 x 6 mm MS angle iron frame and 30 cm above the normal ground level complete with PCC foundation (1:2:4) type B2 complete all as specified and directed by the Engr-in-charge including painting of complete structure with two coats of super enamelled synthetic paint over a coat of red oxide and incoming/outgoing cable connections with required size of cable lugs with proper crimping alongwith one number MCCB capacity of 250A, 36KA breaking cap for control as incomer. 34 Supply & fixing LED street light fitting 70 watt 230 V AC ouitdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrision resistant including thermal management in multiple optics complete with IP 65/66 protection complete including service bracket of G.I. medium grade pipe 40mm bore oflength of 1.5 mtr fixed with clamps, nut bolts, washers etc for mounting of street light on pole. The street light fittings shall be approved by GE before procurement in bulk by the contractor complete all as specified and directed. 35 Supply & fixing fibre looping box with connector including MCB SPN 6 to 20 Amps of size 300x150x300mm including making connections complete as approved by GE and as specified and directed. 36 Supply, Installation, Testing & commissioning of self supporting totally enclosed LT out door type feeder pillar box of size 1500x1200x600mm. Panels shall be suitable for 415V, 3 phase, 4 wire, 50 Hz supply system and lifting hooks shall also be provided in case of large panels, degree of ingress protection of IP-65, manufactured by CPRI approved manufacturer whose panel has been tested during last ten years made out of 3.15mm thick CRCA sheet and built upon rigid frame work having front and rear hinged doors, earthing strip point and bottom detachable gland plate complete with suitable size of Zinc/Chromium plated and nuts, bolts and washers etc. The panel shall be synthetic enameled painted panel door should be both side opening alongwith locking arrangement both side. The panel shall be embedded with 50 x 6 mm MS angle Iron frame amd 30 cm above the normal ground level complete with PCC foundation (1:2:4)type B-2 comprising of the following:- (a) Aluminium bus bars 200 Amp-04 Nos, supported with suitable size of heavy duty porcelain stand lock with suitable size of brass nut, bolts and washer with heat shrinkable PVC sleevingh. The bar shall be colour coded (Red, Yellow and Blue) for three phases and black for neutral(b) MCCB 125 Amps 4 pole, 415 Volt, 36 KA Breaking capacity duly connected to bus bar (As in coming)- 01 No. Make: Legrand/Havells/Schneider/ABB. (c)MCCB 100 Amps 4 pole, 415 Volt, 36 KA Breaking capacity duly connected to bus bar (As outgoing)- 01 No. Make: Legrand/Havells/Schneider/ABB. (d)MCCB 63 Amps TPN, 415 Volt, 25 KA Breaking capacity duly connected to bus bar (As outgoing)- 02 Nos. Make: Legrand/Havells/Schneider/ABB. (e)MCCB 32 Amps TPN, 415 Volt, 25 KA Breaking capacity duly connected to bus bar (As outgoing)- 05 Nos. Make: Legrand/Havells/Schneider/ABB.
