Tender For Repair Of Ground Floor Bathroom Toilet And Repairing Of Flooring.; 1 Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-lll) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) 2 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 3 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 4 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 300x16 mm 5 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250x10 mm 6 Providing and fixing ISI marked oxidised M.S. handles conforming to 1S:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) 125 mm (Door) 7 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 8 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to 1S:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. 9 Double charge vitrified tile polished finish of size Size of Tile 600 x 600 mm 10 Providing and laying Vitrified tiles in different sizes (thickness to bespecified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in allcolours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm 11 12 mm cement plaster of mix :1:6 (1 cement: 6 coarse sand) 12 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 13 Wall painting with premium acrylic emulsion paint of interior grade, havingVOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour Two coats 14 Removing dry or oil bound distemper, water proofing cement paint andthe like by scrapping, sand papering and preparing the surface smoothincluding necessary repairs to scratches etc. complete. 15 Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) 16 Refixing old glass panes with putty and nails 17 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (including equivalent design mix) 18 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm 19 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 20 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 21 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern 22 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make andshade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm 23 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes 24 Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length 25 Providing and fixing Hand shower ( Health faucet) with 8 mm dia 1.2 meter long flexible tube & wall hook of ALD-573 of Jaquar of KA 580008 of Kerovit or cat No. F160013 of Hindware or equivalent make complete as per direction of Engineer-in -charge. 26 Providing and fixing of under counter oval shape basin of size 560x430x195 mm with fixing accessories florntine series category number of FLS-WHT-5701 of Jaquar or KO286SWof Kerovit orequivalent make complete as per direction of Engineer-in -charge. 27 Providing and fixing Towel rail 600 mm long of category number AQN-7711 of Jaquar of KA930001of Kerovit or cat No. F890010 of Hindware or equivalent make complete as per direction of Engineer-in -charge. 28 Providing and fixing glass shelf 600 mm long of ACN-1171N or Jaquar of KA90005 of Kerovit or cat No. F880010 of Hindware or equivalent make including fixing with SS Screw, rawl plugs etc,complete as per direction of Engineer-in -charge. 29 Providing and fixing bib cock with flange of continental series Con-047KN of jaquar of Nucleus series KB111004of Kerovit or Contessa Neo series cat No.F730041 of Hindware or equivalent make ,complete as per direction of Engineer-in -charge. 15 mm nominal bore 30 Providing and fixing Angular stop cock with wall flange ofcategory number -CON-059KNof jaquar orKB111003of Kerovit or Contessa Neo series cat No.F730039 of Hindware or equivalent make ,complete as per direction of Engineer-in -charge. 15 mm nominal bore 31 Providing and fixing Central Hole Basin Mixer without popup waste system with 450 long braided hoses of continental series Con-167KNBof jaquar Nucleus series KB111027of Kerovit or Contessaor equivalent make ,complete as per direction of Engineer-in -charge. 32 Providing and fixing 160X110 mm size bottle gully-Trap of astral HSN code 39174000or Equivalent make including jointing with approve quality adhesive asper direction of Engineer-in-charge. 33 Providing and fixing 110 mm dia uPVC pipe for drainage, soil waste and vent pipe of drainmaster astral of Equivalent make including all necessary fittings ( expect p-trap) where ever required i/c. jointing with approved quality adhesive as per direction of Engineer-in-charge. 34 Providing and fixing 110 mm dia uPVC P-Trapof drainmaster of astral of Equivalent make includingjointing with approved quality adhesive as per direction of Engineer-in-charge. 35 Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 63 A TP&N 36 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 125 A,36KA,FPMCCB 37 Supply and Installation of 36 Watt led 600x600 mm ceiling light
