|
| 1 | Schedule ‘A’ Part-I: Provn of renovation/ constr of 01 No Helipad at Bn HQ Mokokchung 12 ARDemolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. 2.6.1 All kinds of soil |
| 3 | Supplying and stacking at site. 90 mm to 45 mm size stone aggregate |
| 4 | 1:5:10 (1 Cement : 5 Coarse sand (zone-III) derived form natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 5 | 1:2:4 (1 Cement : 2 Coarse sand (zone-III) derived form natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form for 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete |
| 7 | Providing and fixing pre-moulded joint filler in expansion joints of RCC roads / CC pavements after making the joints dust free with high pressure air jet cleaners, all complete as per direction of the Engineer-in-Charge. (Pre-moulded joint fillers shall be made of bitumen hot sealing compound impregnated fibre board having impregnation more than 35%, conforming to IS:1838 for fibre board and IS: 1834 for hot sealing bitumen compound grade A.) |
| 8 | Schedule ‘A’ Part-II: Repair and maint of existing Helipad at COB Changki of 12 ARClearing grass and removal of the rubbish up to a distance of 50m outside the preriphery of the area cleared. |
| 9 | Sacrifying metalled (water-bound) road surface inculding disposal of rubbish, lead upto 50 m and consolidation of the aggregate received from scarifying with power road roller of 8 to 10 tonne capacity. |
| 10 | Providing and applying tack coat using hot straight run bitumen of grade VG - 10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications : On W.B.M. @ 0.75 Kg / sqm |
| 11 | 2.5 cm premix carpet surfacing with 2.25 cum and 1.12 cum of stone chippings of 13.2 mm and 11.2 mm size respectively per 100 sqm and 52 kg and 56 kg of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively, including a tack coat with hot straight run bitumen, including consolidation with road roller of 6 to 9 tonne capacity etc. complete (tack coat to be paid for separately). With paving Asphalt grade VG - 10 heated and then mixed with solvent at the rate of 70 grams per kg of asphalt |
| 12 | Providing and laying seal coat of premixed fine aggregate ( passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG - 10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface, including rolling and finishing with road roller all complete. |
| 13 | Providing and applying 2.5 mm thick road marking strips (retro reflective) of specified shade/ colour using hot thermoplastic material by fully/Semi automatic thermoplastic paint applicator machine fitted with profile shoe. Glass beads dispenser, propane tank heater and profile shoe heater. driven by esperienced operator on road surface inculding cost of material, labour, T& P. Cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. |
| 14 | Night glow helipad reflective paint. |
| 15 | Schedule ‘A’ Part-III: Repair and maint of existing Helipad at COB Dessoi of 12 ARClearing grass and removal of the rubbish up to a distance of 50m outside the preriphery of the area cleared. |
| 16 | Sacrifying metalled (water-bound) road surface inculding disposal of rubbish, lead upto 50 m and consolidation of the aggregate received from scarifying with power road roller of 8 to 10 tonne capacity. |
| 17 | 1:5:10 (1 Cement : 5 coarse sand (zone-III) drived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 18 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) drived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 19 | 1:2:4 (1 Cement : 2coarse sand (zone-III) drived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 20 | Providing and applying 2.5 mm thick road marking strips (retro reflective) of specified shade/ colour using hot thermoplastic material by fully/Semi automatic thermoplastic paint applicator machine fitted with profile shoe. Glass beads dispenser, propane tank heater and profile shoe heater. driven by esperienced operator on road surface inculding cost of material, labour, T& P. Cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. |
| 21 | Night glow helipad reflective paint. |
| 22 | Schedule ‘A’ Part-IV: Repair and Maint re-plastering of existing helipad at COB Aboi of 12 ARClearing grass and removal of the rubbish up to a sistance of 50 m outside the periphery of the area cleared. |
| 23 | Scarifying metalled (water-bound) road surface inculding disposal of rubbish, lead upto 50 m and consolidation of the aggregate received from scarifying with power road road roller of 8 to 10 tonne capacity. |
| 24 | 1:5:10 (1 Cement : 5 Coarse sand (zone-III) derived form natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 25 | 1:3:6 (1 Cement : 3 Coarse sand (zone-III) derived form natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 26 | 1:2:4 (1 Cement : 2 Coarse sand (zone-III) derived form natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 27 | Provinding and applying 2.5 mm thick road marking strips (retro reflective) of specified shade/ colour using hot thermoplasting material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe heater, driven by experienced operator on road surface inculding cost of material, labour, T &P, cleaning the road surface of all dirt, seals, oil grease and foreign material etc. complete as per direction of Engineering-in-charge and accordance with applicable specification. |
| 28 | Night glow helipad reflective paint. |
| 29 | Schedule ‘A’ Part-V: Repair and Maint of existing Helipad at COB Tuli of 12 ARSacrifying metalled (water-bound) road surface inculding disposal of rubbish, lead upto 50 m and consolidation of the aggregate received from scarifying with power road roller of 8 to 10 tonne capacity. |
| 30 | Providing and applying tack coat using hot straight run bitumen of grade VG - 10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications :On W.B.M. @ 0.75 Kg / sqm |
| 31 | Providing and laying Bitumen Penetration Macadam with hard stone aggregate of quality, size and grading as specified, with bitumen of suitable penetration grade, including required key aggregate as specified, spreading coarse aggregate with the help of self propelled/ tipper tail mounted aggregate spreader and applying bitumen by a pressure distributor and then spreading key aggregate with the help of aggregate spreader complete, including consolidation with road roller of minimum 8 to 10 tonne capacity to achieve specified values of compaction and surface accuracy :For 50mm compacted thickness using coarse aggregate of size 50-20 mm graded @ 0.60 cum per 10 sqm key aggregate of size 12.5 mm graded @ 0.15 cum per 10 sqm. With paving asphalt grade VG - 10 @ 50 kg/ 10 sqm. |
| 32 | Providing and laying seal coat over prepared surface of road with bitumen heated in bitumen boiler fitted with the spray set spraying using 98 kg of bitumen of grade VG - 10 and blinding surface with 0.90 cum of stone aggregate of 6.7 mm size (Passing 11.2 mm sieve and retained on 2.36 mm sieve) per 100 sqm of road surface, including rolling and finishing with power road roller all complete. |
| 33 | Providing and applying 2.5 mm thick road marking strips (retro reflective) of specified shade/ colour using hot thermoplastic material by fully/Semi automatic thermoplastic paint applicator machine fitted with profile shoe. Glass beads dispenser, propane tank heater and profile shoe heater. driven by esperienced operator on road surface inculding cost of material, labour, T& P. Cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. |
| 34 | Night glow helipad reflective paint. |
| 35 | Schedule ‘A’ Part-VI: Repair and Maint of existing helipad at COB COB Longleng of 12 ARClearing grass and removal of the rubbish up to a distance of 50m outside the preriphery of the area cleared. |
| 36 | Sacrifying metalled (water-bound) road surface inculding disposal of rubbish, lead upto 50 m and consolidation of the aggregate received from scarifying with power road roller of 8 to 10 tonne capacity. |
| 37 | 1:5:10 (1 Cement : 5 coarse sand (zone-III) drived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 38 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) drived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 39 | 1:2:4 (1 Cement : 2coarse sand (zone-III) drived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 40 | Providing and applying 2.5 mm thick road marking strips (retro reflective) of specified shade/ colour using hot thermoplastic material by fully/Semi automatic thermoplastic paint applicator machine fitted with profile shoe. Glass beads dispenser, propane tank heater and profile shoe heater. driven by esperienced operator on road surface inculding cost of material, labour, T& P. Cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. |
| 41 | Night glow helipad reflective paint. |
| 42 | Schedule ‘A’ Part-VII: Repair and Maint of existing helipad at COB Longkhim of 12 ARClearing grass and removal of the rubbish up to a distance of 50m outside the periphery of the area cleared. |
| 43 | Scarifying metalled (water-bound) road surface including disposal of rubbish, lead upto 50 m and conolidation of the aggregate received from scarifying with poer road roller of 8 to 10 tonne capacity. |
| 44 | 1:5:10 (1Cement : 5 CoarseSand(Zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived form natural sources ) . |
| 45 | 1:3:6 (1Cement : 3 CoarseSand(Zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived form natural sources ) . |
| 46 | 1:2:4 (1Cement : 2 CoarseSand(Zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived form natural sources ) . |
| 47 | Providing and applying 2.5 mm thick road marking strips (retro reflective ) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface incuding cost os material, labour, T&P, direction of Engineer-in-Charge and accordance with applicable specifiacation. |
| 48 | Night glow helipad reflective paint. |
