|
| 1 | Beaching, blocking, unblocking including dock hire and mooring charges as require to be done for complete repair of vessels. Blocking is to done at sufficient height for underwater inspection, scrapping, chipping, wire brushing, cleaning, repairing and painting as perunder supervision of IRS. Total Area is 470 M2 approximately and 10 keel blocks |
| 2 | High pressure water washing and Sand plastering of the keel plate, hull plating , shell plating, and deck plating. Total Area is 470 M2 |
| 3 | Labour charge for serial number2.0 -Lumpsum |
| 4 | Material Costfor serial number2.0 - ACTUAL COST PLUS 5% BASIS (The proposed rate of materials/spare/ consumables along with applicable GST list should be submitted while Evaluation / Negotiation of tender committee)Lumpsum |
| 5 | Ultrasonic testing to be done of under water hull, deck plating , shell plating, hull to below water thickness to be carried out as per IRS requirement Total 600 spots |
| 6 | Cropping and Renewal of keelplates, side shell plates, web frames ,brackets,angle frames, deck plating , etc., as required as per the gauging report and adviseby IRS qualified welders. |
| 7 | Labour charge for serial number4.0 |
| 8 | Material Costfor serial number4.0 (10 mm for Keel & 8mm for Side plates as approved by IRS) - ACTUAL COST PLUS 5% BASIS :(The proposed rate of materials/spare/ consumables along with applicable GST list should be submitted while Evaluation / Negotiation of tender committee) MS steel grade E250 BR for keel plate and other ship side plates Total8 Tons |
| 9 | All plates welded to be carried out with dye test and water integrity test |
| 10 | Labour charge for serial number5.0 Lumpsum |
| 11 | Chipping, scrapping, wire brushing, cleaning and painting is to be done for painting of vessel from keel to water level and painted by 3-coat as per painting scheme marine quality paint after applying 1 coat of anticorrosive paint/primer as per under supervision of IRS. Paintswill be suppliedby PSC |
| 12 | Labour charge for serial number6.0 Lumpsum |
| 13 | Fuel oil tanks (Two) to be gas freed , cleaned of sludgeand paintedwith bituminous paintas required |
| 14 | Labour charge for serial number7.0 Lumpsum |
| 15 | Material Costfor serial number7.0 - ACTUAL COST PLUS 5% BASIS :(The proposed rate of materials/spare/ consumables along with applicable GST list shold be submitted while Evaluation / Negotiation of tender committee) Lumpsum |
| 16 | Both main engine make-Vova Penta BHP 500*2 RPM 1800- Speed 12 Knots to be overhauled by the OME. |
| 17 | Labour charge for serial number8.0 OME Cost PLUS 5% BASIS- Lumpsum |
| 18 | Material Costfor serial number8.0 - ACTUAL COST PLUS 5% BASIS :(The proposed rate of materials/spare/ consumables along with applicable GST list should be submitted while Evaluation / Negotiation of tender committee) Lumpsum |
| 19 | Gear Box TypeHC 300 Hydraulic Marine with Reverse reduction 3:1 to be serviced. |
| 20 | Labour charge for serial number9.0 Cost PLUS 5% BASIS- Lumpsum |
| 21 | Material Costfor serial number9.0 - ACTUAL COST PLUS 5% BASIS :(The proposed rate of materials/spare/ consumables along with applicable GST list should be submitted while Evaluation / Negotiation of tender committee) Lumpsum |
| 22 | Sea chest, suction & discharge valve, mud box, strainer, main and distribution valves, pipeline etc, is to be checked, cleaned with chemical wash as requiredand corroded anodes to be replaced along ship sides as required by IRS. |
| 23 | Labour charge for serial number10.0 Lumpsum |
| 24 | Material Costfor serial number10.0 - ACTUAL COST PLUS 5% BASIS :(The proposed rate of materials/spare/ consumables along with applicable GST list should be submitted while Evaluation / Negotiation of tender committee) Lumpsum |
| 25 | Generators2No 48 KVA to be over hauled and the batteries to be check for optimum conditions as per OEM- |
| 26 | Labour charge for serial number11.0 -OME Cost PLUS 5% BASIS- Lumpsum |
| 27 | Material Costfor serial number11.0 - ACTUAL COST PLUS 5% BASIS :(The proposed rate of materials/spare/ consumables along with applicable GST list should be submitted while Evaluation / Negotiation of tender committee)Lumpsum |
| 28 | All Fire extinguisher to be pressure tested andserviced byDGS/ IRS approved company: 1. .Foam type-9kg,2. DCP-6kg . All fire hose boxes are checked for foundations and nozzles to be polished to ensure the free rotation. All fire hydrants Valves to be over hauled and painted |
| 29 | Labour charge for serial number12.0 Lumpsum |
| 30 | Material Costfor serial number12.0 - ACTUAL COST PLUS 5% BASIS :(The proposed rate of materials/spare/ consumables along with applicable GST list should be submitted while Evaluation / Negotiation of tender committee)Lumpsum |
| 31 | Buoyant apparatus and Life raft to be serviced, tested by the approved authority. |
| 32 | Labour charge for serial number13.0 Lumpsum |
| 33 | Material Costfor serial number13.0 - ACTUAL COST PLUS 5% BASIS :(The proposed rate of materials/spare/ consumables along with applicable GST list should be submitted while Evaluation / Negotiation of tender committee) Lumpsum |
| 34 | Anchor chains to be ranged sand plastered marked and painted |
| 35 | Labour charge for serial number14.0- Lumpsum |
| 36 | Material Costfor serial number14.0 - ACTUAL COST PLUS 5% BASIS :(The proposed rate of materials/spare/ consumables along with applicable GST list should be submitted while Evaluation / Negotiation of tender committee) Lumpsum |
| 37 | Hydraulic steering system to be overhauled and synchronises with rudder reading on bridge and locally. Clean and overhaul Emergency steering |
| 38 | Labour charge for serial number15.0 Lumpsum |
| 39 | Material Costfor serial number15.0 - ACTUAL COST PLUS 5% BASIS :(The proposed rate of materials/spare/ consumables along with applicable GST list should be submitted while Evaluation / Negotiation of tender committee) Lumpsum |
| 40 | All Bridge equipments are to checked for their conditions services as required along with audio and visual alarms working conditionsfor IRS satisfaction |
| 41 | Labour charge for serial number16.0 - Lumpsum |
| 42 | Material Costfor serial number16.0 - ACTUAL COST PLUS 5% BASIS :(The proposed rate of materials/spare/ consumables along with applicable GST list should be submitted while Evaluation / Negotiation of tender committee) - Lumpsum |
| 43 | VHF to be checked for audibilityand synchronisation of frequency |
| 44 | Labour charge for serial number17.0 Lumpsum |
| 45 | Material Costfor serial number17.0 - ACTUAL COST PLUS 5% BASIS :(The proposed rate of materials/spare/ consumables along with applicable GST list should be submitted while Evaluation / Negotiation of tender committee) Lumpsum |
| 46 | All Navigation light bulb contacts to be checked, if abnormal sighted, the same to be rectified. Provided one set spare of all bulbs ( Mast head light, side light, stern light all round lights). Aldis lamp to be checked for workability both power and battery source. |
| 47 | Labour charge for serial number18.0 Lumpsum |
| 48 | Material Costfor serial number18.0 - ACTUAL COST PLUS 5% BASIS :(The proposed rate of materials/spare/ consumables along with applicable GST list should be submitted while Evaluation / Negotiation of tender committee) Lumpsum |
| 49 | Steel fenders along ship side to be replaced |
| 50 | Labour charge for serial number19.0 -Lumpsum |
| 51 | Material Costfor serial number19.0 - ACTUAL COST PLUS 5% BASIS :(The proposed rate of materials/spare/ consumables along with applicable GST list should be submitted while Evaluation / Negotiation of tender committee) -Lumpsum |
| 52 | Overhauling the Air conditionsall units ( Indoor and Outdoor three units) |
| 53 | Labour charge for serial number20.0 -Lumpsum |
| 54 | Material Costfor serial number20.0 - ACTUAL COST PLUS 5% BASIS :(The proposed rate of materials/spare/ consumables along with applicable GST list should be submitted while Evaluation / Negotiation of tender committee) -Lumpsum |
| 55 | Both propeller shaft assembly and rudder shaft assembly to be cleaned and overhauled, stern bush clearence to be checked and renewal if required. |
| 56 | Labour charge for serial number21.0 -Lumpsum |
| 57 | Material Costfor serial number21.0 - ACTUAL COST PLUS 5% BASIS :(The proposed rate of materials/spare/ consumables along with applicable GST list should be submitted while Evaluation / Negotiation of tender committee)- Lumpsum |
| 58 | IRS surveypayment for all above work and sea trial with speed check to carryout with GPS- Lumpsum |
| 59 | Cost of Ferry positioning and repositioning at Kanniyakumari ferry service,with safe manning cost and required diesel along with lubes. The contractor should get all statutory permission for the same.- Lumpsum |
