Tender For General- Sitc Of Lan At South Circle, Roads, Thiruvananthapuram -Lan-General Electronics Work - Supply and Installation of 19-inch 15U/550X600 Wall mounting network rack Conforms to DIN 41494 or Equivalent Standard with powder coated finish, Top & Bottom Cover: Welded to Frame with Cable entry exit cut outs, Front Door: Lockable Toughened Glass Door, Equipment Mounting: DIN Std. 10mm Sq. Slots, including accessories such as Cable Organizers, Power Distribution Unit, Cooling Fans, Rack ground Kit, wall mounting kit etc. Approved make: HCL, Netrack, President, Rittal, Valrack 3 OD271967/2024-2025:Supply, Installation, Testing and Commissioning of 1KVA Line Interactive UPS with ≥30 minutes battery back up on full load for network Rack.Warranty 3 year for UPS and 2 year for battery. Approved Make: APC, Eaton, Vertiv, V Guard or equivalent 4 OD271968/2024-2025:Supply and Installation of Layer 2 Manageable 26 port Ethernet Switch which having 24 x 10/100/1000 Mbps + 2 x Gigabit SFP ports, web manageable supporting ipv6 having 256 MB RAM, Switching Capacity: 52Gbps, AC 120/230V. Warranty: 3 Year. ApprovedMake: Allied Telesis, Brocade, Cisco, HP, Juniper, Netgear 5 OD272977/2024-2025:Supply and Installation of 1G Single Mode Duplex SFP module. Approved Make: Cisco, Belden, Brocade, Aruba, Netgear or Syrotech 6 OD272974/2024-2025:Supply and Installation of Fiber Splice Closure Box support 6 core fiber cable with fully cushioned splice holder containing grooves for fixing splice protection sleeves, Cable Spools made up of flame retardant plastic, high impact resistance, stack-able design for providing sufficient room for storage of excess cables, Blanking plates, pigtail, etc. Including splicing charges 7 OD272975/2024-2025:Supply & providing SC-LC/LC-LC Duplex patch cord 1 mtr. Approved Make: Commscope, Molex, R&M, Sterlite or equivalent 8 OD272972/2024-2025:Supply and Installation of Manageable Wi-Fi -6 wireless Access points having following Specifications: Indoor Dual Band Wi-Fi Access Point with smoke detector appearance. Frequency: 2.4GHz and 5GHz, Wireless Mode: Dual band 2x2 (2.4GHz and 5.0GHz) 4 streams of data for an aggregate throughput of up to 1.8Gbps. Power over Ethernet (PoE), VLAN Support, Antennas: Internal 3.8/4.5dBi (2.4GHz/5GHz) Bidirectional Multi-User MIMO. Certifications: Wi-Fi Alliance certified (WFA) 802.11ax, with (Wi-Fi 6), WPA2, WPA3, Security: Wi-Fi Protected Access (WPA/WPA2/WPA3), 802.11i, MAC address filtering, Guest Network etc. including all accessories such as power adaptor, mounting kit, connecting CAT-6 patch cords as per site condition, etc. Approved Make: Netgear , Aruba or equivalent 9 OD272973/2024-2025:Supply and Installation Gigabit PoE injector which fully conforms to the standard IEEE802.3 AT for transmitting power through Ethernet cable distance up to 100 meters. PoE budget: POE+ up to 30W. TransmissionRate:1000Mbps. Certifications: FCC, CE, RoHS, UL. Warranty for 3 years. Approved Make: Allied Telesis, Tp-Link, Tenda, Ubiquiti, Aruba or equivalent 10 OD271969/2024-2025:Supply and fixing 24 port Enhanced CAT-6 fully loaded Modular type patch panel as per EIA/TIA-TSB 40A specification for interconnecting servers and clients, including termination charges. Preferred Make: Actassi, Belden, Panduit, R&M, Molex 11 OD271970/2024-2025:Supply, installation, testing, and commissioning of UL Listed, ETL verified 0.5 meter CAT 6 UTP Patch Cord having LSZH jacket, 24 AWG bare copper conductor UTP 4 pair both end factory Crimped with modular male plugs with minimum 500 insertion cycles terminiated as per TIA/EIA 568-B colour code conforming to the standards ANSI/TIA-568.2 , ISO/IEC11801, IEEE 802.3, ISO/IEC 60332-1,and RoHS Complaint. Approved Make: Molex, Honeywell, Commscope, Norden 12 OD271974/2024-2025:Supply and Installation of CAT-6 Information Outlet for 1000Mbps having spring shutter / dust cover face plate with one number of RJ45 keystone socket in the existing CMS/existing PVC Box including termination charges etc. Approved Make: Actassi, Belden, Molex, Commscope, RandM 13 OD271975/2024-2025:Supply and installation of CAT-6 Information Outlet for 1000Mbps having spring shutter / dust cover dual face plate with two numbers of RJ45 keystone sockets in the existing CMS/PVC Box including termination charges etc. Approved Make: Actassi, Belden, Molex, R and M 14 OD47518/2025-2026:Supplying, laying, certification and documentation of 23 AWG CAT-6 UTP 4 pair LAN cable with LSZH (Low Smoke Zero Halogen)through the existing surface/recessed steel/PVC conduit/CMS/cassing and cappingas required. Approved Make: Actassi, Belden, Molex, R and M 15 OD271981/2024-2025:Supply and Fixing 1 Module UL certified PVC Box on surface. Approved Make: Honeywell, Legrand, L and T, MK 16 OD272999/2024-2025:Supplying and fixing following size/ modules, GI box alongwith modular base and cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm) 17 OD271982/2024-2025:Supply, installation, testing, and commissioning of UL Listed, ETL verified 2 meter CAT 6 UTP Patch Cord having LSZH jacket, 24 AWG bare copper conductor UTP 4 pair both end factory Crimped with modular male plugs with minimum 500 insertion cycles terminiated as per TIA/EIA 568-B colour code conforming to the standards ANSI/TIA-568.2 , ISO/IEC11801, IEEE 802.3, ISO/IEC 60332-1,and RoHS Complaint . Approved Make: Molex, Honeywell, Commscope, Norden 18 1.21.1:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm 19 1.21.2:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm 20 90.9.1.1:Supply and fixing 50 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recessincluding cutting the wall and making good the damages in case of recessed installation as required.50x50mm Cable Management System with base and lid 21 90.9.1.2:Supply and fixing 50 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recessincluding cutting the wall and making good the damages in case of recessed installation as required.External angle 90 degree 22 90.9.1.3:Supply and fixing 50 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recessincluding cutting the wall and making good the damages in case of recessed installation as required.Flat angle 90 Degree /Tee 23 90.9.1.4:Supply and fixing 50 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recessincluding cutting the wall and making good the damages in case of recessed installation as required.Internal angle 90 degree 24 90.9.1.7:Supply and fixing 50 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recessincluding cutting the wall and making good the damages in case of recessed installation as required.End cap 25 90.9.2.1:Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recessincluding cutting the wall and making good the damages in case of recessed installation as required.100 x 50 mm CMS with base and lid 26 90.9.2.3:Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recessincluding cutting the wall and making good the damages in case of recessed installation as required.External angle 90 degree 27 90.9.2.4:Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recessincluding cutting the wall and making good the damages in case of recessed installation as required.Flat angle 90 degree 28 90.9.2.5:Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recessincluding cutting the wall and making good the damages in case of recessed installation as required.Internal angle 90 degree 29 90.9.2.8:Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recessincluding cutting the wall and making good the damages in case of recessed installation as required.End cap 30 OD273029/2024-2025:Permanent labelling in rack, information outlets etc. A Label in the rack should show the Department Name, Contractor No. and Assistant Engineer No. and date of completion and date expiry of DLP. 31 OD273030/2024-2025:Dismantling and Refixing of Existing switches, patch panels, network cables, racks, information outlets, PVC conduits etc, including conduits. 32 OD153947/2025-2026:Supply and Installation of necessary Electrical accessories for the distribution ofKSEB Power in to UPS in a structured way, including necessary suitable multistrand cables,Sockets, Switches, Electrical PVC boxes etc.as per the site condition.
