}

Tender For Ncfrw-Thuneri Bp-2024-25Baliyil Mukku Mannathamkandi Road-Nadapuram Gp-General Civil Work - Maintenance Work 2 3.15.1:Compacting Original Ground(I) Compacting Original Ground Supporting Embankmentloosening, Levelling And Compacting Original G, Kozhikode-Kerala

Rural Development Department has published Tender For Ncfrw-Thuneri Bp-2024-25Baliyil Mukku Mannathamkandi Road-Nadapuram Gp-General Civil Work - Maintenance Work 2 3.15.1:Compacting Original Ground(I) Compacting Original Ground Supporting Embankmentloosening, Levelling And Compacting Original G. Submission Date for this Tender is 10-09-2025. Road Work Tenders in Kozhikode Kerala. Bidders can get complete Tender details and download the document.




Tender Notice

51022451
Tender For Ncfrw-Thuneri Bp-2024-25Baliyil Mukku Mannathamkandi Road-Nadapuram Gp-General Civil Work - Maintenance Work 2 3.15.1:Compacting Original Ground(I) Compacting Original Ground Supporting Embankmentloosening, Levelling And Compacting Original G
Tender
Indian
Kerala
Kozhikode
10-09-2025

Tender Details

Tender For Ncfrw-Thuneri Bp-2024-25Baliyil Mukku Mannathamkandi Road-Nadapuram Gp-General Civil Work - Maintenance work 2 3.15.1:Compacting Original Ground(i) Compacting original ground supporting embankmentLoosening, Levelling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Tables 300.1 and 300.2 for embankment construction as per Technical Specification Clause 301.4.1. 3 4.1.A.1:Granular Sub-base with Well Graded Material (Table 400.1)(A) By Mix in Place MethodConstruction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.(i) For Grading I Material 4 4.9:Wet Mix MacadamProviding, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406.By Mechanical Means with 1 km lead 5 75.5.1.1pb:Prime Coat - Low porosity - With Packed Bitumen RatesProviding and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502 6 75.5.2.3pb:Tack Coat - With Packed Bitumen RatesProviding and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503. 7 75.5.11.1.A.2pb:Mix Seal Surfacing - Manual Means - Type A - Bitumen S-65 - Packed Bitumen RatesProviding, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509By Manual MeansType A(II) Bitumen (S-65) 8 3.14:Construction of Subgrade and Earthen Shoulders Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. 9 Name board 10 OD16496/2025-2026:Providing and fixing metal name board of size 120x60CM with 15mm dia and 2mm thk GI pipe, 0.8mm thick MS sheet, 35x35x5mm angle for post etc erected in concret

Key Value

Document Fees
INR 1865 /-
Tender Value
INR 8.45 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail