Tender For Construction Of South Gate Complex At Jnpa, Mumbai-Maharashtra

Tender For Construction Of South Gate Complex At Jnpa; 1 CIVIL WORKS 2 DISMENTALING 3 Dismantling the R.C.C. Work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete. 4 Dismantling brick masonry in Mud and stacking the materials as directed with all leads, lifts etc. complete. 5 Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts etc, complete. 6 Removing the existing cement plaster of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc. complete. 7 Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 10 metres lead.Contractor to use support props for beam and surround area before starting any breaking activities 8 Providing & Fixing of Temporary Barricading Work site and creating separate access for Guest House using mild steel frame and Colour galvanized sheets and hassian Cloth as per approved Plan, Contractor has to remove and handover used material to JNPA with inventory , item complete as per direction engineer incharge. 9 Pest control : Providing antitermite treatment to the sides of flooring of the existing building as per I.S. 6313(Part-Ill) by purching holes 6mm dia. drilled at a distance of 30cm. centre to centre and injecting one percent of chlorodane emulsion concentrate at the rate of 50 ml per hole and sealing by fillingputty etc. complete. 10 Carting away of debris from work premises to dumping area with tractor trolley as directed by engineer in charge . 11 EXCAVATION AND FILLING 12 Providing JCB on hire basis including fuel, operator etc for excavating/ desilting/shifting, loading, unloading and levelling of excavated/ Desilted material as directed with all leads, lifts etc, complete. 13 Providing Hydra 830- 30 MT on hire basisincluding fuel, operator etc for shifting, loading, unloading of M.S.pipes / RCC Pipes /stones weighing 500 to 1000 kilogram for Apron / Armour layer including conveying with all the leads, lifts, laying in requiredetc completed as directed by Engineer-Incharge. 14 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means 15 Excavation for foundation in hard rock by controlled blasting including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete. a) Upto 1.50m lift Normal Rate 16 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. 17 Providing selected hard murum filling including laying in layers of 15 to 20cmwith watering and compacting etc. complete. 18 RCC Work 19 Providing placing and Driving in position 8millimeter mild steel liner for R.C.C. Piles upto required depth with 12mm thick mild steel cutting edge of 0.50m length at bottom including fabricating cutting the mild steel sheet to required diameter and shape ,welding the joints and driving with the help of required machineries including all materials labours and lifts etc. complete as directed by the Engineer in charge. Spec :(As directed by Engineer in Charge From 3.00 to 9.50 meter deep liner 20 Providing and casting in situ / ready mix PCC M20 grade of trap metal for coping to head walls / parapet including centering, form work, compaction and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ) 21 Providing and laying cast in situ / ready mix M40 RCC for 600 mm diameter bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement, compaction of concrete and withdrawal of steel shell with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete.with VSI quality artifical sand (depth 0 to 5 metre) i) Add 30% extra for depth 5 to 10 m ii) Add 40% extra for depth 10 to 15 m iii) Add 60% extra for depth 15 to 20 m 22 Chiseling:- Chiseling through soft rock/ weathered rock/ hard rock/ large boulders/ masonary /concrete etc using a chisel weighing not less than 750 kg etc. completed. 23 Chipping and dressing of the R.C.C. piles upto 0.60 meter including cleaning reinforcement and removal of dismantled materials upto a distance of 50 meter beyond the building area etc. for providing pile caps. 24 Conducting Dyamicload test :-Carrying out load test for 1.5 times the proposed safe working load on the pile in driven position above 550 mm and upto 650 mm diameter including construction of test cap, use of accessories and instruments including providing graphs as per I.S. code or Std.Specifications and dismantling the test cap after testing and cleaning the site complete. 25 Conducting Pile Integrity test 26 Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap metal for R.C.C. pile caps as per detailed designs and drawings, including bailing out water manually, centering, formwork, laying/ pumping, compacting, finishing and curing etc. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) complete (Excluding steel reinforcement 27 Providing & applying approved quality coal tar epoxy paint in three coat for surface of pier, fountdation, pile cap, pier, abutmant below ground level including cleaning surface, scaffolding etc. complete. 28 Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade 29 Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 30 Providing Bipolar Concrete Penetrating Corrosion Inhibiting Admixtire to integral concretePOLYALK CP ( SUNANDA MAKE) or KP 200 of M/s. Krishna Conchem or equivlent at those dose of 3 kg per cum. Of concrete. Inhibitor should be non nitrite based and have the ability to providecorrosion protection to both anodic & cathodic sites on steeel surface. Inhibitor should form polydentate complexes with the steel surface to promote proper film formation. Inhibitor must not have any adverse effect on concretecompressive strength. This may be estableshed through laboratory test resultsfrom independent laboratory. Inhibitor test reports accredited laboratoryindicating significant reduction in corrosion after accelerated corrosion test based on JIS Z 1535. Further inhibitor must have undergone long term performamce test as per ASTM G3 indicatingrebar weight loss of less than 5mpy for both tests. Work shall be executed by certified applicator only and work shall br guaranteed for 5 years andgaurantee shall be given on Rs. 500/- stamp paper in Stipulated format. 31 Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Layers including watering and compacting etc. complete. 32 Crushed sand (upto 5 mm) brought by Contractor 33 Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 34 Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 35 Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 36 Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 37 Stamp Concrete of 100mm Thickness - Providing and Laying in-situ M30 Grade unreinforced plain cement stamp concrete of 100mm thickness pavement over a prepared sub base with 43 grade cement, coarse and fine aggregate (natural sand / VSI grade finely washed crushed sand) Confirming to IS 383, as per mixed in a batching and mixing plant / non tilting mixer and weigh batcher as per approved mix design, admixtures, transporting to site in nagpur city with lead upto 20KM (on Inner Ring Road from Avasti nagar to wadi), spreading, laying with approved make pover, compacted and finished in a continous operation, finishing to lines and grades Also Providing, Placing and applying stamp powder which is light fast UV resistant pigment with appropriate chemical compounds of desired colour on base concrete after excess bleed water has evaporated using dry shake method @5Kg. per Sqm.. Including texturing, and covering with plastic sheet (min 200 micron thickness) and also applying two coats of UV-stable,30 % solids clear sealer @ 150 to 250 gms per Sqm. using surface roller and protecting from falling dust,dirt and curring by curring compound / by providing cement vata in cement Mortor 1 :8 @ 0.6m x 0.6m center to center, admeasuring 80mm at bottom and 40mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-incharge or Landscape architect etc. complete. (prior approval of superinteding Engineer will be necessary ) 38 Providing and laying in situ M-20 cement concrete of trap / granite / quartzite / gneiss metal with 15% plum of trap stones for foundation and bedding of retaining walls and jetty etc. including necessary formwork, compacting, curing, bailing out water manually in tidal range etc. complete. 39 Providing cast in situ / ready mix M30 grade cement concrete for head walls of CD work / retaining walls etc. including necessary form work, compaction, finishing and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA 40 Providing and fixing during laying in RCC Slab rectangular 2 mm thick M.S. sheet fan hook box of size 180x100 mm with required depth with holes or notches as required, bottom and top sides of 1.6 mm M.S. sheet fixed with 3.5 mm dia. round headed screws together with 12 mm dia. M.S. bar bent to shape with hooked ends for fan hook and painting to exposed surface 41 Providing and laying Cast in situ/Ready Mix cement concrete inM-25 of trap / quartzite/granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 42 Providing and fixing in position HCRM / CRS (Corrosion Resistant Steel) bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. 43 Providing and fixing 25 mm diameter steel anchor dowel in hard rock including drilling hole of 32 mm diameter upto 0.75 mtrs depth, placing the dowel in position and effectively grouting the hole with CM 1:1 proportion etc. complete. 44 BRICK WORK 45 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete 46 ProvidingAutoclavedAeratedConcreteBlockmasonaryofEcoliteorequivalentmake conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972) 47 PLASTER& WATERPROOFING 48 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen daysscaffolding etc.complete. 49 Providing internal cement plaster 6mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. 50 Providing and applying gypsum plaster ( with Gypsum material of Gypsum India / Mega Sign or equivalent make ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete. 51 Providing waterproof plaster in W.C. and bath 12 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 kg. per bag of cement of approved make and manufacturer and curing etc. complete.(Excluding Tiles) (As directed by Engineer in Charge) 52 Providing water proof bedding for flooring of Toilet 25 -35 mm thick in C.M. 1:3 including using approved water proofing compound of Sunanda / Pidilite / Kerakol or equivalentin specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering etc. complete. 53 Providing waterproofing in Toilets including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years guarantee on requisite stamp paper including curing etc. complete. 54 Providing and laying water proofing treatment toterrace slab with Nnilobit,Dr.fixit or equivalent mm thick APP modified bitumen membrance with polyster reinforcement with over lapping of 75 mm along length and lOO mm along width including removing the existing tarfelt treatment particles including applying bitumne based primer at 0.20 litr/sm and laying 3 mm thick APP modified bitumen membrane coating with torching method and finishing the surface with heat reflective bitumen based silver paint at 0.10 Ltrs/Sq.M. etc complete as per manufacturer specification and as directed by the Engineer in charge.( With 7 years guarantee period ) 55 EXTERIORELEVATION 56 P&F ACP Cladding : Designing, providing, fabricating and installing Aluminium Composite panels cladding system on exterior façade (inclusive of exterior 3-6mm panels of 600 x 1200 or approved size) with back structure framing arrangement, as per approved design (based on concept architectural elevation drawings), hot dip galvanized / non ferrous metal anchor fasteners, jointing and sealing with approved compatible silicon sealant (Dow Corning or equivalentapproved).Work to include preparing and finishing of junctions with concrete, masonry, aluminum including us of flashing if any as approved by the Engineer in charge etc. all complete. Rate includes removing existing cladding material stacking the same at JNPT Store yard as directed by engineer in charge. 57 Providing and fixing metal Baffel panels powdercoatingfinished are fixed on to 50-100 x 25 -50mm deep (or as per approved shop Drawing)of galvanized steel with cut-outs to hold the panels in customize module. Carriers are suspended from the roof by 4mm dia. Galvanized steel rod hanger with special Hight adjustment spring steel suspension clip at max. 1mtr. C/C. Hangers are fixed to the roof by ceiling bracket. work will be done as per approved Design & Drawing or Direction by Engineer In-Charge. 58 Design, Structural checkingfrom Consultant fabrication, supply, installation, protection, cleaning and handover of Semi-unitised Curtain wall systems with / withoutMild steel insert in mullion, design to withstand a wind pressure not less than as mentioned in Technical specification ( 1.4 KPA ) . The curtain wall has to be fully prefabricated assembled units completed with glazed panels/sash frames units & install on to site fixed frames, channels and brackets. The quote includes interface details, flashing, sealants, insulations, Anchors & Bolt, brackets, Alum. copings and any sub frame as required. DGU Glass - 6 mm thick SG SKN II 476 ENVISION PLUS glass on outside and 6mm thick clear glass on the inside, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, Typical insulated vision glass [OUT]6mm HS with Double Low-e coating on surface 2 + 12mm Air Space + 6mm HS clear - Saint Gobain SKN II 476 Envision PlusMS Insert - MS to be diesel wash coated with Redoxide, insterted inside the Curtain wall sections with PVC backing , MS to be fixed to RCC Structure with MS Plate 12 mm thick and with Hitli fastners as per consultant design. Jointing of pipes to be done by using sleeves. Mullion 6131 - 60 x 200mm ( 4.921 kg / M) , Transom 5319 - 60 x 100mm ( 2.335 kg / M) with Combination Pressure Plate 10585( 0.642 kg/ M ) & Cover Plate 10583 ( 0.305kg / M) and transom connector 5779 - 57.9 x 50mm ( 1.808 kg/M ) complete with additional required pipe, weather sealent , hardware, M.S. Shoe Bracket, Fastner , Screw etc. etc. All internal & external exposed aluminium extrusion shall be in SDF Powder coating (To Meet Requirement of AAMA 2605) & colour to architects selection. Rate to Include Transport, installation of glass scafolding , Structural stability report from Govt approved institution / IIT / COEP. complete. The item to be executed as per Architect schematic design. 59 Providing andFixing Structural Glazing : Designing, providing, fabricating and installing Structural glazing system (inclusive of vision, spandrel and openable panels) with back structure framing arrangement, as per approved design (based on concept architectural elevation drawings), Anodised Aluminium members like muliions, etc. in approved shade, including required stainless steel fitting and fixtures, required hot dip galvanised / non ferrous metal.anchor fasteners, jointing and sealing with approved compatible silicon sealant (Dow Corning or equivalentpproved), required fire stop, sheaves. Work to include preparing and finishing of junctions with concrete, masonry, aluminium including use of flashing if any as approved by the Engineer in charge etc. all complete.( all fittings of dorma or equivalent and Glass of Saint Gobain or equivalent) Rate includes removing existing shutters stacking the same at JNPT Store yard as directed by engineer incharge 60 Providing and applying external raincoat painting with crack filling acrylic polymer based chemical compound coating to the external surface of walls to prevent water seepage in the masonry walls during monsoon added with required shade Steiner to give required shade to the surface in two coats. Including providing three coat of priming of polymer base primer including preparing surface scrapping the existing loose old paint, removing loose particles of sand on the surface opening and cleaning the cracks developed in the external plaster, removing loose particles by chiseling, filling cracks by chemicals compound of approved make with proper penetration etc. Coating of Raincoat with the help of brush and as per instructions and specification given by manufacturer and with instruction from Engineer in- charge. Work shall be executed by certified applicator only and covering gurantee of 3 years on court stamp paper of Rs. 500/-and necessary testing etc. complete 61 Providing and Fixing of 50 mm Thick PUFF Roofing Panels Sheet Thickness 0.5 mm Both Side PPG/ PPGL . Density 40 Kg / 3 .Colour RAL 9002 with Covering Flacing and side flacing as per Approved Design and drawing or Direction by Engineer In-Charge. 62 Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete. 63 MS FABRICATION 64 Providing and fixing mild steel grill gateas per the detailed drawing including hinges ,locking arrangements and painting in three coats of oil paint of approved colour and shade etc.complete.(weight18Kilogram. to 20 Kilogram. Per Sq.m.)Spec.Number: As directed by Engineer- in-charge. 65 Providing and fixing 900 mm highS.S.304GradeStainlesssteelrailingwith40mmdiameterand1.5mmthickattop,40mmdiameterand1.5mmthickverticalsupportsspacedat1.5mcentertocenterand8mmthicktoughenedglassincludingfabricating,fixtures,errecting,necessarywelding,grinding,finishing, buffing to stainless steel pipe etc. complete 66 Providing and fixing 40mm diameter and 1.5mm thick Stainless steel handrailing inS.S.304 Grade including fabricating, fixtures, errecting, necessary welding ,grinding, finishing, buffing to stainless steel pipe etc. Complete 67 ADITIONAL REQUIRED PACKAGE- EXTERNAL CIVIL 68 Raising of folding to reach the entire surface area of bridge or Building .up to 10 m height above ground level, made with MStube ,horizontal and vertical tub joint with cup and lock system with MS tubes, challies,MS clamp and maintaing it in a serveciabl econdition for execution work of cleaning and/or pointing and or/applying protection coating and/ inspection of work at required locations and removing it there after etc complete .(Item includes making of temporary support for scaffolding, cost of scaffolding, labour, material, safety devices,etc.,all complete) 69 Providing and fixing heavy duty inter locking concrete Rubber mould glossy paving blocksfor outdoor landscape, of 80 mm thickness of having a strength of 400 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc.complete. (using 100% crushed sand) - Basic rate -120/- Sft 70 Providing structural steel work of rectangular hollow steel section for steel trusses, other similar trussed items like purlin and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted / welded connections and one coat of anti corrosive paint and over it two coats of oil painting of approved quality and shade complete. Spec. Number : As directed by Engineer-in-charge. 71 EXTERNAL DRAINAGE SYSTEM 72 P&F PVC Pipe 110mm Dia : providing and fixing 110 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. com-plete P&F Vitrified Tiles flooring (Italian effect) : Providing and fixing decorative Italian marble effect tiles of size 600 x 300 mm of about 5 to 6 mm thick having water absorption less than 0.055 of approved make, shade and pattern for floor & dado in required position fixed on plaster of cement mortar 1:4 neat cement paste. including filing joints with neat white cement slurry curing cleaning etc. complete directed by Engineer in charge. 73 Providing and fixing of P.V.C. 160 mm Rain Water Pipe 6Kg/cm2 Pressure. 74 Inspection Chamber : Supplying and constructing brick masonry inspection chambers with 230/345mm brick masonary in cement mortar (1:4) mix, 20mm thick cement finish plastered internally and externally in cement mortar 1:4 mix incl. necessary excavation, foundation concrete 1:3:6 mix 150mm thick, top cover of FRP having 20T capacity, fixing in coping, S.W.G. half round channels 150mm dia, concrete haunches, and frame 16mm dia. C.I. rod rungs at 300 mm c/c etc. complete as shown on the drawing and/or directed and instructed by Engineer/Owner. NOTE: (Brick work to be 230mm thick upto 1.0M depth and 345mm thick beyond 1.0M depth). 75 Providing, laying and fixing P.V.C. pipe of 200mm dia. type-B with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 76 Gully Traps : Supplying and fixing in position stone ware gully traps 150 x 150mm size with cover including brick masonary chamber of clear internal size as 300mmx300mm with cement plaster finishes 77 Supply and laying of the following RCC Hume pipe including road cutting, excavation to a depth of 750mm, back filling as required for cable entry including the cost of sealing the ends and making good as required and complete in all respects: 300 MM DIA RCC HUME PIPES 78 Providing and laying concrete pipes of I.S.NP.class of 300 mm diameter in properline, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. 79 Providing and fixing high-density polyethylene (HDP) container one piecemoulded water tank made out of high density polyethylene and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity up to 20000 litres 80 MANHOLE CHAMBERS 81 Constructing brick masonry man hole chambers for electrical & LV Services with bricks of class designation 75 in cement mortar 1:5 (1 cement : 5 coarse sand) with RCC top slab of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), 200 mm thick foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside and outside plastering 12mmthick in cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement inside and rough plaster on outside and making channel in cement concrete 1:2:4 mix,(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering shuttering all complete.(1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) neatly finished complete M.S s, complete as per standard design and approved drawings, including the cost of excavation, back filling, disposal of surplus earth foot rests and other associated civil works with S.F.R.C cover and frame (heavy duty, HD- 20 grade designation) conforming to I.S. 12592,total weight of cover and frame to be not less than 182 kg., fixed in cement 82 1000 x 1000 mm chamber 83 900 x 900 mm chamber 84 600 x 600 mm chamber 85 Supplying 0.30m x 0.30m internal size rectangular air tight composite resin manhole cover and frame of approved brand with grade designation C250 as perstandard with bolt and lever type locking arrangement. Covers & frame shall have top abrasion resistant layer conforming to IS-15658:2006 andas specified and as directed by Engineer-in-Charge. 86 LANDSCAPE 87 Lawn Plantation With Material :- Grassing with grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and filt for mowing including supplying good earth if needed (the good earth shall be paid for separately) In rows 5 cm apart in either direction. 88 Providing Laying and Preparing shrubbery :- Excavating the ground in all types of strata to required depth of 45 cm , removing and conveying unwanted stuff to a required distance as directed. Filling fresh garden soil and manure in excavated area in 3:1 proportion to a height of 30 cms. Mixing garden soil and manure thoroughly, well, levelling,watering on previous night. Planting well rooted shrubs 0.5 mtrs. apart as & when directed andmaintaining till well established by watering, weeding, stirring, replacing casualties, etc. complete. 89 Providing & Laying Loose riverwash rough river with Polish pebbles on site as Directed by Architect with minimum 150mm thk (Size 12 to 50 mm ) 90 Construction of granular sub-base by providing close gradedMaterial, mixing in a mechanicalmixplant atOMC, carriageofmixedMaterial towork site, spreading in uniform layerswithmotor grader/ Paver on prepared surface and compactingwith vibratoryroller toachieve thedesireddensity, completeasper clause401--PlantMix Method and Grading - I Material 91 Constructionof dry leancement concreteSub-baseover a preparedsub-grade with coarse and fine aggregate ( natural sand/ VSI grade finelywashed crushed sand) conformingtoIS:383, the size of coarse aggregate not exceeding 25mm, , cement content not to be less than150kg/cum,optimummoisture content to be determined duringtrial lengthconstruction, concrete strength not tobeless than10 Mpaat 7days, mixedina batching plant/Weigh batchmixer, transported to site with all lead sand lifts, laidwitha paverwith electronic sensor /bysuitablemeans as approvedby Engineer-in-charge , compactingwith vibratory roller, finishing, curingand includingpreparationof sub gradesurfaceif requiredetc.complete. withfullyautomaticmicroprocessorbasedPLC withSCADAenabledreversible DrumTypemixer/concreteBatchmixplant(Panmixer) etc. complete. 92 Providing and erecting chain link fencing 1.6M. height with G.I. chain link of size50 x 50mm, 8 gauge thick and fixed 75mm above ground level on vertical M.S.Angles of 40 x40x6 mm size, includind excavating pits for foundation and embeddedin C.C. block of 1:4:8mix of size450x450x670mm. at1.75M.c/cwith iron bar16mm diaas hold fastincluding welding link with angle frame at 30cm c/c with nuts and bolts and horizontal M.S.Angle sat top and bottom of 25x25x5mm size and vertical M.S. flat35x5mm and 25x5mm horizonta lincluding cross support of 40x40x6mm angles both side at every corner or bend embedded inconcrete blocks of 1:4:8 of size450x450x670mm including 3 coats of oil painting etc. complete 93 INTERIOR WORKS 94 FLOORING AND TILING 95 Providing & fixing machine cut machine polished 18 mm to 20 mm thick granite stone for treads and risers of staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. 96 Providing & laying Composite Marble of approved make, shade and pattern for flooring / Dado in required position / design laid on hard plastered/ PCC surfacewith suitable Adhesive approved by Marble manucturer , item includes curing and cleaning, covering with POP or vinyl sheet & two coat polishing after finishing of allied interior work etc. complete.16 mm thick having water absorption less than 0.05% (AGL, Nitco or equivalent, ), complete as per directions engineer incharge. Basic Rate of composite marble- 350/- per sft. 97 Providing & laying in position flooring of granite stonefor passage and halls of approved shade and size 18mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. 98 Providing & FixingItalian marble flooring : Providing and fixing Italian marble in flooring, skirting, wall dado etc as approved using 15-20mm thick required size & pattern and of approved shade, color and texture laid using white cement slurry over 20 mm thick base of cement mortar 1:4 (1cement : 4coarse sand) followed by laying, fixing and jointing with epoxy and teemax mastic,white cement slurry mixed with matching pigment, including rubbing, curing, of approved profile and polishing of mouldings and edges to give high gloss finish etc, complete at all levels and as per direction of E-I-C. (Basic rate Rs.300/sft) 99 Providing & FixingVitrified Tiles flooring (mirror finish) 900 x 900 or any size: Providing and laying Rectified and vitrified mirror finish decorative type tiles of size of approved make, shade and pattern for flooring in required position laid on plaster of 1:4 cement mortar, cement paste, removing existing tiles stacking the same and debris disposing off upto a distance of 50 metres &filling joints with neat cement slurry, curing and cleaning, covering with POP or vinyl sheet etc.complete.a) Minimum 900 mm x 900 mm and8-10 mm thick having water absorption less than 0.05% (RAK, Kajaria or equivalent, Basic rate Rs. 150/sft) 100 Ppoviding & FixingLaminated Wooden Flooring : Providing and fixing pergo original mort hand wearing laminate or equivalent flooring with excellent properties long life time original floor planks should be joined together all the groove etc. complete. 101 P&F Flooring 600 x 600 : Providing and fixing MATT FINISH ANTISKID tiles of minimum size 600 x 600 mm of about 10mm thick having water absorption less than 0.055 of approved make, shade and pattern for floor & dado in required position fixed on plaster of cement mortar 1:4 neat cement paste. including filing joints with neat white cement slurry curing cleaning etc. complete 102 Providing and laying Vitrified tiles having size 60 cm. x 60 cm / 60 cm to 120 cm. confirming to corresponding I.S. for dado in Toilets andrequired position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry/ grouting cleaning curing etc. complete. 103 Providing and preparing kitchen Platform /Wash Basin Counter upto 75 cm width, made up from 30 mm thick and 75cm high vertical support for kadppa at 1m.c/c of 25 mm thick both side polished kadappa middle shelf and bottom of 20 mm thick one side polished kadappa with facia patti of 20 x 50 mm kadappa including all material labour cutting fixing with cement mortar and araldite curing polished and cleaning etc. complete. 104 Providing double sills, jambs and frames of black/approved colour granite slabs 20 mm thick of approved quality, vein and colour with machine polished surface on a bed of cement mortar 1:4 including neat cement float,removing existing cills stacking the same and debris disposing off upto a distance of 50 metres, removing, refurbishing & refixing existing alu. grill, filling joints with cement slurry to match the colour of the slabs, curing polishing and rounding edges, cleaning etc. complete.(Basic rate Rs. 165/sft) 105 Providing and laying Rectified and vitrified mirror finish decorative type tiles for 100 mm High Skirting ofapproved make, shade and pattern for Skirting in required position laid on plaster of 1:4 cement mortar, cement paste, removing existing tiles stacking the same and debris disposing off upto a distance of 50 metres &filling joints with neat cement slurry, curing and cleaning, covering with POP or vinyl sheet etc.complete.) 106 PAINTING 107 Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. 108 Providing and applying Antimicrobial pearl/ luster / Satin finish paint of approved colour and shade over punned / puuty finish etc. complete. 109 Providing and applying plastic emulsion paint of approved colour, shade and quality to old/new surfaces in two coates including scaffolding, preparing the surfaces etc. complete. (including primer coat).(Dulux, Asian or equivalent) 110 Providing and applying two coats of synthetic enamel paintfor window grills and railing of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. 111 Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases(NOx, VOC‘s, CO, SOx,formaldehydes,etc.inpresence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide. and Absorbs CO2(4.8Kilogram/15l).plaster crack should be filled by Acrylic base Crack seal/ Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti Pollution Primeror Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and hes 112 DOORS AND WINDOWS 113 Providing and fixing in place Single leaf glass door for cabins of overall size of each leaf 900mm x 2450mm made out of 12 mm thk. tougfened glass. The door will be finished with necessary accessories like patch fitting pivot, floor spring, lock, handle etc. Rate to include cost of heavy duty floor spring ( capacity 120 kg), sshandle of size 450mm, ball bearing hinges, mortise concealed dead lock, door stopper and all required hardware complete as directed. (all fittings is Hafele or equivalent) 114 Providing & FixingDoor Shutters in Both side Laminatefinish :with Complete Hardwareat require location and having height more than 1:5 meter made by using solid core Mariane type flush door 35 mm thick of the requisite manufacuture viz.Anchor / Century / Kenwood / Duro or equivalent generally confirming to I.S.710-termite treatment to plywood and wood work with ten years guarantee bond etc. Including all leads & lifts etc. Complete necessary lipping (BTC) mounding, hardware, locks handle’s etc.as per Architectrual drawing to be approved by Employer before entire scheme is finalsed and directed by engineer incharge. 115 Providing and fxing of uPVC Window Openable/ Sliding, Ventilator etc of all sizes, made out of Coated extruded section plain uPVC sections. The window frame made out of rigid uPVC sections meter cut at 4 corners & joint with plastic fusion welding with internal reinforce required. The shutter section made out of extruded rigid uPVC with internal reinforced with provision of 5mm glaze/wire mesh as per requirement. The window shall be fixed to the wall using 65x100mm long M.S. fasteners at suitable place provided for each vertical and horizontal member etc. complete as per manufacture’s specification and direction of Engineer-in-charge. 116 Providing & Fixing ofFire Door Single Leaf (1000-1200 mm x 2100 mm) with accessories, 2 Hr Fire Rating MS fire Door as per Design & Drawing or as per Direction by Engineer In Charge. 117 Supply & Installation of DORMA or EquivalentSG System100 Door1500 - 2100 mm on provided doorFrames & Glass Shutter of size100mm x 30/45mm & Style 70mm x 45mm for door of size 1500 x 2100. It includes supply of 10mm Thick Toughened glass for Door. Hardware as below. FLUSH HINGE 127x78x3mm, SS304, SATIN FIN, Dorma Narrow Style Lever handle and Lock, TS70 OPEN Door Closer with Slide channel arm and hold open unit, Half Dome Door Stopper. as per Desing & Drawing or as per Direction by Engineer In Charge. 118 Providing & Fixing of Automatic Sliding Door Operator Non Fire Rated Operator Finish : Standard Alu.Sliver, Clear Opening : 1800mm (W) X 2100mm (Ht) 2 Moving Panels of 900mm each, Panel Weight Double Sliding = 2 x 100 Kgs, ES 200 Easy 4.15mtr Automatic operator Consists of :‐ Operator Profile ‐ 1 nos Mechanical Component ‐ 1 nos Electrical Component ‐ 1 nos, Glass Clamping Rail 1050mm ‐ 2nos Floor Guide for Glass Door ‐ 2nos Five Position Program Switch with knob ‐ 1no Cable for Program Switch Nemo Motion + Nemo Dual ( Safety& Motion) Combo pack Soft nose Seal ‐ 2nos of 2200mm EM Lock ‐Fail Safe,12mm toughened clear crystal edge polished glass for 2 Moving panels ONLY as per Approved drawing and Design or Direction By Engineer In-Charge. 119 ROOFING AND CEILING 120 Providing and fixing in position Moisure Resistant Gypsum board ( MR Board of Saint Gobain or USG Make ) false ceiling with 12.5 mm thick Gypsum boards, screwed /fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25x50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and inter mediate channels. Additional inter mediate channels should be fixed to straphangers for additional support to prevent strapping at every 1200milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete.curved wedge of 51.5 mm and two flanges of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with the help of connecting clips and in direction perpendicular to the intermediate channel at 450 mm centers, 12.5 mm dry walls screws at 230 mm centers; fixing screws mechanically either with screw driver or drilling machine with suitable attachment etc. complete. 121 Providing and Fixing Mineral Fibre Acoustical Suspended Ceiling System with Dune(BevelledTegular) Edge Tiles of size15mm Exposed Grid.The tiles should have Humidity Resistance(RH) of99% ,NRC0.5,Light Reflectance 85% ,Thermal Conductivityk=0.052-0.057 w/m K, Colour White ,Fire Performance UK Class 0/ Class 1 (BS476pt-6&7) inmodule size of 600x600x16mm, with Recycled content of 35%. The tile shall be laid on precoated G.I.channel height 32 with 15mm wideT-section flanges colour white having rotary stitching and XL2CLI Ponall Tsectionsi .e.the Main Runner,1200mm and 600mm Cross Tees with a web height of 32 mm and a load carrying capacity of 7.57 Kilograms / M2 and pull out stength of minimum 100 Kilograms..The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system. The Tile and Grid system used together should carrya 10year warranty .approved as per GRIHA and BS476 etc.complete. 122 Providing and fixing false ceiling with eco-friendly light-weight calcium silicatetiles of spintone surface texture aerolite make or equivalent of size 595mm x 595mm having 15mm thick densified micro look edge and 100% humidity resistance incombustible as per BS 46part IV and thermal conductivity 0.043 w/m 0 KC and NRC 0.50 placed in true horizontal level suspended grid of size 600x600mm made from hot dipped G.I. steel sections ion silhouette profile, rotary stitched double webbed white with 6mm reveal profile (white/black), wherein, main T runner of size 42mmx14mm between main tee 600mm center-tocenter and secondary cross T of size 33x14x0.43mm thick of length 600mm long spaced inter-locked at middle of the first crossed T in each panel to form grid of 1200mmx600mm resting on periphery wall Profile wall section 19mm (7+7) x 19mmx0.40thicknesses and laying false ceiling for services like diffusers grills including cutting, making opening for light fittings, fixtures, , smoke detectors etc., wherever required. Main T runners suspended from ceiling with using G.I. soffit cleats of size 25x35x1.6 mm of required length fixed to the ceiling with 6mm dia and 50mm long dash fastener, 4mm dia G.I. adjustable rods with powdercoated/good quality G.I. level adjustment clips of 35x35x0.8mm spaced @1200, center-to- center along main T all complete at all heights as per the specifications, drawings and as pe 123 Supply & Installation of Modular Gypsum Trap door 600 mm x 600 mm as per Detail Design & Drawing or as per Diretion by Engineer In Charge. 124 Supply & Installation of Modular Gypsum Trap door 450 mm x 450 mm as per Detail Design & Drawing or as per Diretion by Engineer In Charge. 125 WALLPAPER & TEXTURE 126 Providing and fixingimported quality wall paper of 0.8 mm. thick of approved quality and design made up of poly venyl coating with fabric backing five resistant wipe cleaning strain resistant and having height of 390 Gram/Sq.M.. etc. and as directed by Engineer-in-charge Basic Rate 350/- Sft 127 EXTERIOR Texture paint : Providing and applying EXTERIOR Texture paint of ASIAN PAINTS GRANIZA or equievatent of approved colour, shade and quality to old/new surfaces in two coates of luster paint including scaffolding, preparing the surfaces etc. complete. (including primer coat and laambi).(Asian, Dulux or equivalent) 128 Frosted Film for glass partitions Providing & fixing Roller blind made up of APO Grey or approved shade100% polyester or polymer coated glass fi bre. with White coloured hardware • Bracket covers • Double bead plastic chain, secured with a child safety cord tensioner • Dual brackets • Linked brackets • Headbox • Side channels etc complete as approved by the Engineer in charge etc. all complete. (Hunter Douglas or equivalent) 129 CARPENTARY AND INTERIOR 130 Providing & Fixing45-60 cm deep cupboard type storage unit made out of 19mm thick Mariane plywood of the requisite manufacture i.e.Anchor/Century/Kenwood/ Duro/Jet or equivalent generally confirming to I.S. 710 for frames, internal verticles horizontal divisions, shutters and 6mm & 12mm thick Mariane plywood with necessary locks, handles, hardware, lipping & beading patti (BTC) etc. The total shall be finished with formica laminate sheet in approved pattern with grooves etc. and two coats of french polish with antitermite treatment to plywood including all leads & lifts etc. complete.as per Architectrual drawing to be approved by Employer before entire scheme is finalsed and directed by engineer incharge. 131 Providing & supplying square / circular shape Dining Table4 seater , made of SS metal frame, With laminate top edge moulding, with nylon buffers etc completeas per Architectrual drawing to be approved by Employer before entire scheme is finalsed and directed by engineer incharge. 132 Providing & supplying ofDining table chair with having cushion on seat and back with wooden leg completeas per Architects Drawings. as per Architectrual drawing to be approved by Employer before entire scheme is finalsed and directed by engineer incharge. 133 Providing & suppling of Single Seater sofa made by using necessary ply & hardwood. Leg to be made by Teak wood with Watebase pu finished. Seat, Handrest and Backrest to be upholsered, complete as per design. 134 Providing & supplying of 2 Seater sofa made by using necessary ply & hardwood. Leg to be made by Teak wood with Watebase pu finished. Seat, Handrest and Backrest to be upholsered, complete as per design 135 Providing & suppling of 3 Seater sofa made by using necessary ply & hardwood. Leg to be made by Teak wood with Watebase pu finished. Seat, Handrest and Backrest to be upholsered, complete as per design. 136 Providing & supplying of Center Table made by using necessary ply of Mr Grade with Smoke Larch Veneer in sun burst pattern on Top. Wooden Base / Leg of Ash wood finished in Waterbase pu as per design. Size 900 x 600 x 450mm ht. 137 Side Table : Providing & fixing 40-45cm deep side table made out of 19mm thick Commercial plywood for all sides, 12mm & 6mm thick Commercial plywood for drawers of the requisite manufacturer i.e. Anchor/Century/Green ply/Kenwood or equivalent confirming to I.S. 303 with necessary approved fixtures & fastening and lipping patti for edges. The outer surface shall be finished with laminate sheets of approved make in approved pattern with grooves etc melamine poish for beading patti and antitermite treatment to wood work including all leads & lifts as per Architectrual drawing to be approved by Employer before entire scheme is finalsed and directed by engineer incharge. 138 WORK STATION - L1050/1200W600H750 Providing and fixing in place 600mm deep running counter made of Plywood with post form edge profile for 25mm thick table top consisting of a drawer pedestal of size 450mm x 500mm x 500mm & 400mm high Modesty partition with key board, CPU trolley for every 900mm of length and all the necessary hardwares etc. complete. All the exposed surfaces to be finished with 1.0mm thick laminate. (Ply & laminates of the requisite manufacuture viz.Anchor /Century / Marino or equivalent generally confirming to I.S.303 / I.S. 710- 1980) - Without Alumnium Partition 139 Medium Height Partition @ 1800/1200HT TILE BASED PARTITION SYSTEM:-Tile based Aluminum partition system of 1800/1200mm ht.made of 60 mm thk aluminum frames having two separate raceways for laying electrical & computer wiring.The wire management shall be throught otheraceway to be fitted at bottom of partition and other immediately below of work top with hook on type raceway cover for easyaccess of wires.Frames to be joined by aluminum connectors with M6 x 16 pan- head machine screw and washer with aluminum post cover.Post cover of snap on fashion to be connected onaluminum connectors .All visible aluminium to be in anodized finish.The top/exposed sides of the frame and posts should be covered with horizontal/Vertical trim and caps made of Aluminumin anodized finish in order to enhance its look.Upper tiles of partition to be in Soft Board or Marker tile of 9 mm .thk.,and plywood lower tiles in laminate finish of 9mm.thk.on both the sides. 140 Excutive table 2100 X 900 X 750 MM Providing and fixing in place, table of comprising of 25mm thick table top made of plywood with including modesty apron to be made out of 19mm thick commercial plywood. The table top to have post form edge. All complete including key board drawer, and necessary hardwares. all the external surfaces to be finished with 1.0mm thick laminate and internal surfaces to be finished with 0.8 mm thick laminate of approved shade. all complete as directed. (Ply & laminates of the requisite manufacuture viz.Anchor / Century / Marino or equivalent generally confirming to I.S.303 / I.S. 710- 1980) 141 Excutive table 1800 X 700 X 750 MM Providing and fixing in place, table of comprising of 25mm thick table top made of plywood with including modesty apron to be made out of 19mm thick commercial plywood. The table top to have post form edge. All complete including key board drawer, and necessary hardwares. all the external surfaces to be finished with 1.0mm thick laminate and internal surfaces to be finished with 0.8 mm thick laminate of approved shade. all complete as directed. (Ply & laminates of the requisite manufacuture viz.Anchor / Century / Marino or equivalent generally confirming to I.S.303 / I.S. 710- 1980) 142 CONCIERGE DESK :- Size of 1950 x 600 x 1050 mm Providing and fixing in place, table of comprising of 25mm thick table top made of plywood with including modesty apron to be made out of 19mm thick commercial plywood. The table top to have post form edge. All complete including key board drawer, and necessary hardwares. all the external surfaces to be finished with 1.0mm thick laminate and internal surfaces to be finished with 0.8 mm thick laminate of approved shade. all complete as directed. (Ply & laminates of the requisite manufacuture viz.Anchor / Century / Marino or equivalent generally confirming to I.S.303 / I.S. 710- 1980) 143 Executive chair W560xD600xH1200mm Providing & supplyingExecutive chair finished with PU leather, Wooden armrest, head rest with Nylon frame, Mesh back,mesh seat filled with foam,Five star nylon base with nylon casters.15cm and tilt tension, Swivel type, Powder coating base etc complete as approved by the Engineer in charge etc. all complete. (Wipro, featherlite or equivalent) 144 Visitors chair W560xD560xH1000mm Providing & supplyingvisitor chair finished with leathermesh fabric, Fixed PP armrest, with Metal frame, seat filled with foam, with nylon buffers. Powder coating base etc complete as approved by the Engineer in charge etc. all complete. (Wipro, featherlite or equivalent) 145 Officers chair W560xD560xH1000mm Providing & supplyingOfficer chair finished with Fabric, Mesh fabric, Fixed PP armrest, with Nylon frame, Mesh back,mesh seat filled, with foam, Five star nylon base with nylon casters lift, Adjustable seat height and tilt tension, Swivel type, Powder coating base etc complete as approved by the Engineer in charge etc. all complete. (Wipro, featherlite or equivalent) 146 Staffs chair W560xD560xH900mm Providing & supplyingOfficer chair finished with Fabric, Mesh fabric, Fixed PP armrest, with Nylon frame, Mesh back,mesh seat filled with foam,Five star nylon base with nylon casters.15cm gas lift, Adjustable seat height and tilt tension, Powder coating base etc complete as approved by the Engineer in charge etc. all complete. (Wipro, featherlite or equivalent) 147 Conference Table -Oval Shape (4000 L to 1510 x 750mm ht.) Providing and fixing in place, table comprising of 25mm thick table top made of calibrated plywood. All edges to be finished with 2 mm thick edgeband Rehau make with machined pressed and finished. Complete structure to be made of calibrated plywood all the external surfaces to be finished with 1.0mm thick laminate and internal surfaces to be finished with 0.8 mm thick laminate of approved shade. all complete as per Architectrual drawing to be approved by Employer before entire scheme is finalsed and directed by engineer incharge. 148 Providing and fixing plywood Laminated panelling, frame workas per requirement to be Fixed on wall/masonry/column with necessary fixing details to attain the reqd level of the surface, stability & rigidity.framework to be covered using 12 mm thick Mariane grade plywood as per design. Finished with 1 mm thick approved laminate from sides & top. Edges of laminate to be made smooth. Rate inclusive of necessary Cutouts for switches /lights & other fixtures Basic Rate of laminteRs. 450/Sq.M.. 149 Providing and fixing Bison Boardpanelling, frame workas per requirement to be Fixed on wall/masonry/column with necessary fixing details to attain the reqd level of the surface, stability & rigidity.framework to be covered using 12 mm thick Bison Boardas per design. 150 Roller Blind Providing & fixing Roller blind made up of APO Grey or approved shade100% polyester or polymer coated glass fi bre. with White coloured hardware • Bracket covers • Double bead plastic chain, secured with a child safety cord tensioner • Dual brackets • Linked brackets • Headbox • Side channels etc complete as approved by the Engineer in charge etc. all complete. (Hunter Douglas or equivalent) 151 Copper Colour Mirror with Panelling : Providing and fixing Copper Colour Tint Mirror panelling with framework 12 mm thick plywood finished with 8mm thk tint grey colour mirror fixedas per Architects Drawings.(Plywoodof the generally confirming toI.S. 710) 152 Providing and Fixing600 *600 Gridof Aluminium section of size 50mm X 38 mmhaving wall thikness not less then 1.4 mm for all type of panneling wooden Frame work to create service route and to avoid undulation inpanelling,to be fixed on existing surface with screw, complete as per Direction by Engineer In--Charge. 153 Providing and fixing full height toughened glass partion height more than 1.34m of 12mm thick with frosted effect including edge policy with necessary stainless steel finish heavy type brass patch fitting to hold the glass etc. complete 154 Providinng & Fixing Picture Frame as per Design & Drawing 155 Providing & Fixing Charcol Panel of Plain, Baffel design or as per Given Design for panelling, Ceiling etc. over rrready surface of wall / Partition / Panelling, etc, completed as per Architect design and instructions engineer in charge, basic Rate for charcol panel Rs. 550/- Per sft 156 PLUMBING 157 SANITARY FIXTURES & FITTINGS 158 Providing and fixing European type wall -hung white water closet of approved make with Consiled Cistern for flush valve, push valve concealed type with coverplate 32 mm size of approved make including Chair Bracket, soil pipe, vent pipe upto outside face of wall,100mm plug bend inlet pipe all fittings, cutting and making good walls, floors etc. complete. 159 Providing and fixing C.P.a 2-Way BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge. 160 Providing and fixingHealth Faucet : Providing and fixing health faucet jet spray of approved Jaguar or equivalent make including necessary socket/union etc. complete as directed. 161 Providing and FixingWash Basin : Providing and fixing Hindware or equivalent make Wash Hand Basin of Italian pattern and style of Olivia or similar series or fonte series, having star white as per Architecual drawing and directed by the Engineer-in charge etc. complete. 162 Providing and FixingPillar Basin Mixer :PILLER BASIN MIXER of push tap/ Hands free with sensor ofapproved Roca make or equivalent make including necessary socket/union etc. complete as directed. 163 Urinals : Providing and fixing white glazed wall mounted earthenware semi stall type urinals (of IS Std.) without cistern, with inlet pipes chrome finished push valve type tap, UUPVC flush pipe with fittings and flushing arrangement including UPVC soil pipe, UPVC trap and soil pipe connection upto outside face of wall, making good the damaged surface, chromium plated bottle trap, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.) Make - Roca or equivalent. 164 Providing and Fixing of Toilet Paper Holderin chromium plated finish as per approved sample Basic rate of Rs. 1000/- 165 Providing and fixing in position robe hooks in toilets as per approved sample basic rate of rs. 600/- 166 Providing and fixing stainless steel sink of size 600 x 510 x 200 mm including coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete. 167 Bottle Trap : P/F Bottle trap for wash basin 168 Providing and Fixing, testing and commissioning ofC.P. brass angle valve with C.P. wall flange, Nut and Washer etc. complete as required. 169 C.P.sink mixer Supply of Sink Mixer - Jaquar note:- J shape spout with wall flange of heavy duty Jaquqr make (Wall mounted). (Sink cock with J shape spout Cat. No. FLR-5309N OR consider equivalent make) 170 Providing and fixingSoap Dispenser :with glass bottle of approved jaguar or equivalent make etc. Complete 171 P&F Towel ring : Providing and fixing Towel ring round flange of approved jaguar or equivalent make etc. complete. 172 Provding and fixing Steel High Speed Hand Dryer Supplying of Touch free stainless steel hand dryerHand Dry Time : Less than 20 Seconds Motor : Brush Type, Dual Ball Bearings Protection Class: IPX1Blowing Volume : > 270 m3/ Air Speed : 95 m/s Basic Rate 15000/- 173 INTERNAL WATER SUPPLY SYSTEM 174 Supplying, installing, fixing, jointing, testing and commissioning of approved make. Chlorinated Polyvinyl Chloride pipes (cPVC) SDR.11 pipes confirmingto ASTMstandardswithnecessaryfittingsforinternaltoilet water supply upto 50 dia, and above 50mm dia pipe schedule 40with fitting shall be schedule 80 ASTM IPS. The fittings and specials such as tees, elbows, couplers, bends, enlargers etc., with CPVC brass threaded combination / transitionspecialssuchasmaleadaptersbrassthreaded female adapters, brass FPT Tee, Brass FPT elbow etc., where connection with metal is to be made including necessary drilling holes, chasing walls and making the same good in cement mortor 1:1 restore the same original condition neatly as directed by the Engineer in-charge. Joints to be made with CPVC solvent cement up to 50mm dia as per ASTM D-2846 and above 50mm dia primer P-70, and solvent confirming to ASTM F-4931 / 724. All exposedpipeshallbepaintedwithlatexpaint.(for inside toilet & shafts). The rate shall include necessaryGIsupports,GIgrip bolts, angle brackets, hangers, supports as with suitableGIU-clamps, bolts, nuts and washersetc.,Theclampsshallbepaintedwithtwocoatsofenamel (approved) paint over a coat of primer etc., complete. (For domestic water supply) 175 20 mm dia 176 25 mm dia 177 32 mm dia 178 40 mm dia 179 50 mm dia 180 Providing, fixing, jointing and testing, PN10 conforming to 1703GM ball valves screwed end with SS lever operated of approved make, including flanges / unions, nuts, bolts, washers, etc. complete, as approved byEngineer-in-charge for water supply lines of the following nominal bore (NB) size: 181 20mm dia 182 25mm dia 183 32mm dia 184 40mm dia 185 Supplying & fixing Auto Air vent with in-built ball valve for water supply risers, suitable for pressure not less than 15 Kg/Sq.cm. 186 a) Air release valve size- 20mm 187 Supplying, fixing in position approved make PN16 GM non-return valve conforming to IS 778 with unions etc., complete. 188 40 mm dia 189 Supplying, installing and commissioning approved make Bronze Y type strainer screwed with necessary nuts and bolts, neoprene rubber gaskets, flanges, etc.., complete. 190 50 mm dia 191 DRAINAGE SYSTEM 192 Providing and fixing in position uPVC/SWR (Soil/Waste/Rain) pipe of type-B 110 mm dia. in any position including all fittings and accessories, making joints / connections water tight with solvent cement, scaffolding if necessary and making good the damages if any (excluding excavation and refilling the trenches) etc. complete as specified and directed.(All fittings and accessories like clamps,etc. should be of same brand. Noseparate payment shall be made for fittings and accessories). 193 Providing and fixing in position uPVC/SWR (Soil/Waste/Rain) pipe of type-B 75 mm dia. in any position including all fittings and accessories, making joints / connections water tight with solvent cement, scaffolding if necessary and making good the damages if any (excluding excavation and refilling the trenches) etc. complete as specified and directed.(All fittings and accessories like clamps,etc. should be of same brand. No separate payment shall be made for fittings and accessories). 194 Providing, laying and fixing P.V.C. pipe of 50 mm. dia. type-B with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 195 Providing, laying and fixing P.V.C. Pipe of 40 mm. dia. type-B with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 196 Supplying, fixing and testing PP multi floor trap with water seal of 50 mm deep with SS frame and cover 75mm dia outlet fixed on a bed of cement concrete with heavy duty type etc., complete.. (For hand wash & dish wash area) 197 Supplying, fixing and testing PP P-trap with brass CP frame and threaded cover (150mm x 150mm). Trap of 100mm dia. Inlet and 75mm dia outlet fixed on a bed of cement concrete with (Heavy duty type) etc., complete. (The frame & grating) 198 Drilling with core cutting machine in RCC beams, slabs floors etc., for laying pipes and rendering the same in RCC 1:2:4, finishing the same to the satisfaction of the Owner orhis authorized representative etc., including nominal reinforcement wherever required, complete.RCC slabs - Depth of Slabs between 200mm to 300mm 199 a) 51mm dia upto 110 mm dia pipe 200 b) 111mm dia. upto 160 mm dia pipe 201 b) 160mm dia. upto 200 mm dia pipe 202 Providing & Fixing ofPVC Multi Floor Trap 110x75x50mm Dia 203 Supplying, fixing and testing PVC P-trap with brass CP frame and threaded cover (150mm x 150mm). Trap of 100mm dia. Inlet and 75mm dia outlet fixed on a bed of cement concrete with (Heavy duty type) etc., complete. (The frame & grating) 204 Gully Traps : Supplying and fixing in position stone ware gully traps 150 x 150mm size with cover including brick masonary chamber of clear internal size as 300mmx300mm with cement plaster finishes 205 Providing, laying and fixing, jointing Eco-drain 200mm SN4Nu-Drain Upvc pipes or of equivalent make, manufacture as per EN13476 or equivalent as per I.S.15328 with fittings such a bends, teestees, coupler etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated material etc. complete. 206 RWH - Recharge Pit Providing and constructing recharge pit of 2.0m deep and 1.0m dia of pre-cast RCC rings with 6.5 dia x 25m deep borewell at the floor of recharge pit including installation of combination of solid/perforated PVC casing pipe wrapped around with netlon mesh including 300mm thick sidefilling around outside of RCC rings (annular space) with 40mm size boulders including filling of recharge pit up to 0.5m depth with 25-75mm clean washed gravels from bottom up followed by 0.5m depth of 10- 25mm of clean washed stones followed by 0.5m of washed river fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) including netlon mesh between each gravel/fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) media layer including covering with RCC slab, manhole frame & cover, PVC rungs, PVC endcaps, fittings etc. including arrangement for inlet & outlet pipe excavation & backfilling as shown in the drawing.The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge. 207 Providing and laying cement concrete pipe of IS458:2003 NP-3 class of 800 mm diameter in proper line, level and slope etc. complete. 208 PRESSURE BOOSTER SYSTEM(DOMESTIC& FLUSHING)(1W+1SBY) Above Price For Pressure Booster System Dom+Flus Each Set1set = 2 pumps 209 1.5 H. P, Single phase 230V/3 phase 440V 50Hz 2900Rpm KSB make Horizontal Multistage S.S Inline pump. Each pump capacity 150 L.P.M at 25 Mtr discharge head with 3 Mtrs Submersible power cable. 210 System mount with complete horizontal MS Fabricated many fold typemounting base stand with necessary 80mm G.I “C “class main suction header withstrainer 65 mm flanges GI pipe with 50 mm Butter fly valve50 mm branch pipe line with Butterfly valve, N.R.V & 65 m.m Discharge header with Ball Valve, Branches For Each Pumps. 211 300 Ltrs Capacity Pre-Charged Diaghpram tank with Fittings. 212 Sheet Steel Clad wall mounting Siemens gray powder coated electric control Panel control of 2 x 1.5 HP Horizontal Multistage pump having 40 AMP Incoming Isolating TPN-MCB, And 25 AMP Branch MCB, R.Y.B. indicating lights, control Fuses, voltmeter with selector switch Amp meter for reading current of any one Phase AUTO/MANUAL/OFF selector switches for each pump. L&T /Schneider make DOL Power Contactor and SPP type overload relay and single-phase preventer. Electronic Toggle relay for alternating of both pumps. Time Delay Relay for Auto On/Off Control relay & Casket type Programmed. 213 Float Switch (Censor) with lid Wire. 214 Pressure Switch, Pressure Gauge with Fittings. 215 Cables as Per Requirement for Power & Controls. 216 Sewage Treatment Plant 217 Design, Supply, Installation and Testing of Sewage Treatment Plant of Commission 25 KLD with Commissioning Including of 5-10mm Spacing SS Bars, 1665 FRP Vessel TopOpening, Protected Surface Area450m2 Specific Gravity 0.9 MOC Virgin PP, 750 MM V shape Black, MOC Virgin PP, Pipes and Fittings (MS and cPVC) pipe, 1.5 m3/Hr., 15 M Head, Submersible Sewagepumps, 1.0 m3/Hr., 10 M Head,Self Priming Pumps, 1.5m3/Hr., 35 M Head Filter Feed Pumps, Air Blowers with a lot of Diffusers 50m3/Hr., 4000 MMWG Head, Motor as drive for blowers 1440 RPM, 3 Phase, 40 RPM, 0.5 kw 0.75HP Agitator, 6 LPH, 240 V, Single Phase pump with 40 Ltr chemical-storage, Control Panel & Cable. 218 HVAC SYSTEM 219 HIGHSIDE EQUIPMENTS 220 VRF Outdoor units 221 Supply of inverter /Digital scroll compressor with Variable refrigerant system connectable to multiple indoor units.Outdoor unit shall be factory assembled weather proof casing constructed from heavy gauge mild steel panels.The unit shall be completely factory wired and tested with necessary controls and charged with refrigerant. The compressor shall be highly efficient scroll type. The aluminium fins shall be covered with anti-corrosion resin. Unit shall be equipped with oil recovery system to ensure stable operation with long refrigerant piping. Units shall be tested and commissioned with additional refrigerant. 222 Unit Capacity 223 VRF Indoor units 224 Ceiling mounted 4 way compact cassette unit 225 1.0TR - 4-Way Cassette 226 1.6TR - 4-Way Cassette 227 Ceiling mounted 4 way cassette unit 228 2.0TR - 4-Way Cassette 229 2.6TR - 4-Way Cassette 230 3.2TR - 4-Way Cassette 231 Wall mounted hi-wall unit for vrf system 232 1.6TR - Hi-Wall 233 SITC of Wireless Remote 234 Supply, Installation, Testing & Commissioning of Energy Manaeger CRC 235 Supply, installation, testing & commissioning of Refnut Joints 236 Refnet (Y joint) 237 HI-WALL SPLIT AC INVERTER 238 1.6TR - Hi-Wall SPLIT AC -5 Star Inverter 239 2.0TR - Hi-Wall SPLIT AC -5 Star Inverter 240 LOW SIDE INSTALLATION 241 VRF (Cooling only) INDOOR UNIT & OUTDOOR UNITS 242 Installation, of inverter /Digital scroll compressor with Variable refrigerant system connectable to multiple indoor units.Outdoor unit shall be Including rubber pads for outdoor units etc. 243 Unit Capacity 244 VRF Indoor units 245 Installation of Indoor Unit Cassette Unit 246 Pressure testing and Refrigerant Gas chargingbetweenindoor & outdoor units. 247 Unit Capacity 248 Commisioning charges of ODU Unit 249 Installation Refnet (Y Joint) 250 Outdoor Units Stand 251 Fabrication and installation of MS base frame for outdoor units complete with epoxy painting, vibration isolation pads, supports, hangers, brackets etc for ODU unit 252 VRF ODU 253 Split Unit ODU 254 Refrigerant Piping with Superlon insulation & necessary support - VRV system 255 SITC of Under deckinsulation with 25mm closed cell with all joints taped with 60mm self adhesive tape. Class O insulation. Insulation shall have factory applied aluminium foil facing 256 Supply Installation & Testing of Control Cabling from indoor to outdoor unit. 257 2C X 1.5 Sqmm Cu sheilded cable 258 4C x 2.5Sqmm CU Flexible cable 259 Supply, Installation & Testing of power cabling from Indoor unit to supply point. 260 3C x 2.5 Sqmm CU flexible Cable 261 Supply, Installation & Testing of power cabling from Outdoor unit to supply point. 262 4C x 10Sqmm copper Armoured cable 263 Supply and Installation of PVC Drain piping with 6mm thick closed cell nitrile rubber tubular Installation with Necessary supports, screws, etc. Required u trap for allmachines. 264 25mm Dia 265 32mm Dia 266 Supply and Installation of PVC Drain piping with 6mm thick closed cell nitrile rubber tubular Installation with Necessary supports, screws, etc. Required u trap for allmachines. 40mm Dia 267 Sheet Metal Works 268 Supply, installation of sheet metal RECTANGULAR DUCTS complete with all accessories like flanges, all necessary MS supports with epoxy Painting, suspension rods , anchor bolts, GI bolts & nuts, etc. 269 24 gauge (0.60mm) 270 GI ducting Thermal insulation 271 Supply Installation testing & Commissioningof Flexible Ducts: As per below 272 200 Ø 273 100 Ø 274 Supply Installation testing & Commissioningof Volume Control Damper 275 Automatic duct flow controller for fresh air supply to cassette 276 Aluminium powder coated Exhaust Air Grille/ disc valve 277 Supply, Installation, Testing & Commissioning of Exhaust & Fresh Air Fan 278 150cfm / 10mm SP - Fans 279 300cfm / 10mm SP - Fans 280 500cfm / 15mm SP - Fans 281 600cfm / 15mm SP - Fans 282 Supply , installation,testing and commissioning of Fire retardent canvass connection to connect Fan mouth and duct with necassy supports and fittings, 283 Supplying and fixing Pin top for machine ( 15Amp / 05 Amp ) Make - Anchor or Equivalent or as per Direction by Engineer In Charge. 284 SITC of timeer for electrical room Indoor 285 Supply , installation of Out Door Unit Cowl Piece. 286 Supply & Installation ofGI cable tray to protect the exposed refrigerant pipes 287 Cable tray with cover (300 mm x 75 mm) 288 Cable tray with cover(450 mm x 75 mm) 289 Cable tray with cover(150 mm x 75 mm) 290 2nd Year After Completion of Defectliability Period. 291 3rd Year After Completion of Defectliability Period. 292 4th Year After Completion of Defectliability Period. 293 5th Year After Completion of Defectliability Period. 294 ELECTRICAL WORK 295 L T PANEL & DISTRIBUTION BOARDS 296 MLTP PANEL 297 Deisgning, Supplying, Transporting to project site, Installing the Main Panel on a suitable MS fabricated stand 300mm above the floor level in approved manner, fixing of all the switchgear, controlgear and instrumentation using all the accessoires, proper termination, wiring with suitable size lugs, testing and successful commisioning. The components and the protection type are as below as per SLD- 1. IP43, 16SWG - Overall, 14SWG - Gland plates, Top entry2. Powder coated - RAL73103. Base frame - 100mm C channel4. Incomer - ATS - 160A5. Outgoing - 100A, 63A, 80A etc feeders6. SPD for the Main Incomer and AC Feeder 298 STREETLIGHT PANEL 299 Supplying, transporting to project site, installing and commissioning of floor mountedpanel dust and vermin proof street light control panel in powder coated CRCA 14/16 SWG sheet,outdoor type, Single phase, 240 Volts consisted of suitable Mtring contactor, 24 Hrs Digital / Astronomical time switch, SPN MCB 63 Amp, Auto/manual selector switch, ON/OFF push buttons, indicator lamps, control wiring, metering device, etc for automatic opeMtrion & overcurrent, short circuit, earth fault protection of street lights upto the max load of 12 kW on provided iron frame / CC foundation. incorpoMtring the details as shown in the SLD. 300 12 Way TPN Per Phase IsolatonDB with 25A/32A/63A FP MCB as incomer, 3no. 25A/32A/63A DP RCCB, 30mA, Si for Phase segregation and 6A-32A SP MCB-36no. as outgoing as per SLD 301 12 Way TPN Per Phase IsolatonDB with 25A/32A/63A FP MCB as incomer, 3no. 25A/32A/63A DP RCCB, 100mA, Si for Phase segregation and 6A-32A SP MCB-36no. as outgoing as per SLD 302 12 Way TPN Per Phase IsolatonDB with 25A/32A/63A FP MCB as incomer, 3no. 25A/32A/63A DP RCCB, 300mA, Si for Phase segregation and 6A-32A SP MCB-36no. as outgoing as per SLD 303 12 Way SPNDB with 25A/32A/63A DP RCCB as 30mA incomer,and 6A-32A SP MCB 10no. as outgoing as per SLD. 304 Supplying, transporting to project site, installing and commissioning of 63A, FP, MCCB,10 KA in sheet metal enclosure.(Make- Legrand or equivalent ) 305 SITC of 3-Ph Power Sockets at Shop Floorfor Outdoor AC Units with 32A/40A, 5Pin, Socket & Plug (3P+N+E) - 1no;32A/40A, TPN MCB+ELCB (100mA) - 1no etc complete mounted inIP65 Box. Plug & Socket must be of IP65 Type. (Make- Legrand or equivalent ) 306 CABLES AND END TERMINATIONS 307 CABLES : Supplying and laying in ready built-up trenches / excavated trenches, through hume pipes laid by other agencies / on walls or on walls of lift shafts or on columns or on ceiling using G.I. spacers and G.I. saddles / G.I clamps made fromG.I.strips, or on cable trays (cable tray supply & installation covered under item D.3) with nylon cable ties, the following XLPE insulated 1.1 KV grade, armoured and overall sheathed copper / aluminium conductor cables are made to IS:7098 (Part-l) 1988. Note: The quantity given in the quantity column is only indicative. The contractor shall bring to sitecables as per actual requirement. Note:A2XFY/A2XWY stands for aluminium conductor armoured XLPE cable, 2XWY stands for Copper Conductor armoured XLPE cable. 308 3.5C X 150 Sqmm. A2XFY Cable 309 4C X 25 Sqmm. 2XWY Cable 310 4C X 16 Sqmm. 2XWY Cable 311 4C X 10 Sqmm. 2XWY Cable 312 4C X 6 Sqmm. 2XWY Cable 313 3C X 6 Sqmm. 2XWY Cable 314 3C X 4 Sqmm. 2XWY Cable 315 3C X 2.5 Sqmm. 2XWY Cable 316 3C X 2.5 Sqmm. YY Cable 317 1C X 16 Sqmm. YY Cable 318 EndTermination:Supplying and making end terminal joints to the following 1.1 KV grade PVC insulated armoured overall sheathed copper / aluminium conductor XLPE cables, using nickle plated cable glands, copper compression type cable sockets, PVC insulating tapes, etc. 319 3.5C X 150 Sqmm. A2XFY Cable 320 4C X 25 Sqmm. 2XWY Cable 321 4C X 16 Sqmm. 2XWY Cable 322 4C X 10 Sqmm. 2XWY Cable 323 4C X 6 Sqmm. 2XWY Cable 324 3C X 6 Sqmm. 2XWY Cable 325 3C X 4 Sqmm. 2XWY Cable 326 3C X 2.5 Sqmm. 2XWY Cable 327 3C X 2.5 Sqmm. YY Cable 328 1C X 16 Sqmm. YY Cable 329 1C X 6 Sqmm. YY Cable 330 LIGHT AND POWER POINT WIRING 331 sub main Light Point wiring from distribution board to switch board using 2Rx2.5Sq.M.m & 1Rx1.5Sq.M.m FRLS PVC wire 1100 V grade in 25mm PVC conduit, including cost of providing saddles. 332 sub main Power Point wiring from distribution board to switch board using 2Rx2.5Sq.M.m & 1Rx2.5Sq.M.m FRLS PVC wire 1100 V grade in 25mm PVC conduit, including cost of providing saddles. 333 sub main Power Point wiring from distribution board to switch board using 2Rx1.5Sq.M.m & 1Rx1Sq.M.m FRLS PVC wire 1100 V grade in 25mm PVC conduit, including cost of providing saddles. 334 SITC of Primary Light Point controlled by one 6A SP Switch.(Point Length will be Avg. 6Mtrs for first point from Switch Board .) 335 SITC of Secondary Light Point.(Point Length will be Avg. 3Mtrs for first point to Second point .) 336 SITC of conceled/above false ceiling Ceiling Fan Point with 2X1.5 sq. mm + 1X1 sq. mm FRLS PVC Wiring inpvc pipe (of ISI Make) along withModular6A Switch & 5 Step Fan Speed Regulator in modular box with all other required accessories etc. complete. ( ONE POINT CONTROLLED BY ONE SWITCH ) . Point Length will be Avg. 6Mtrs for first point from Switch Board . 337 2 Nos of 6A 5-pin sockets and 1 Nos 16A SP switch in suitable backbox along with front plate. 338 2 Nos of 16A 5-pin sockets and 2 Nos 16A SP switch in suitable backbox along with front plate. 339 1 Nos of 6A 5-pin sockets and 1 Nos 6A SP switch in suitable backbox along with front plate. 340 1 Nos of 16A 5-pin sockets and 1 Nos 16A SP switch in suitable backbox along with front plate. 341 1 Nos of USB Socket and 1 Nos 6A SP switch in suitable backbox along with front plate. 342 Supply & installation 6/16A 3 pin top for AC machine 343 LIGHT FIXTURE 344 Supply, Installation & Commissioning of following lighting fixtures with required material including necessary accessories, wiring connection, chain, down drops, supports etc.(Make -Wipro, Havells, Legero 0r Equivalent) 345 15 W Recess Mounted Down light 346 9 W Recess Mounted Down light IP 65 347 41 W Recess Mounted Down light IP 65 348 40 Watt Surface / Pendent Mounted LED Batten Fixture IP65 349 LED Strips 5watt/mtr with 25watt Driver. 350 Supply & installation of 25W bollards. 351 Supply and Installation of Wall light 2x12W Make - Wipro, Havells 0r Equivalent or as per Direction by Engineer In Charge. 352 Supply & Installation of wall Light 2 x 18 Watt Make - Wipro, Havells 0r Equivalent or as per Direction by Engineer In Charge. 353 Supply, Installation, Testing & commissioning of Occupancy / ultrasonic Sensor Make - Wipro, Havells 0r Equivalent or as per Direction by Engineer In Charge. 354 SITC of Supplying and erecting Insect Catcher 355 BLDC Ceiling fan, 26 watt to 30 watt, 1200 mm sweep, energy efficientSweep, with regulator and remote control, suitable for single phase, 230V, 50Hz, A.C. supply operationcompletewithaccessoriessuchas15 longdownrod,canopies, 356 SITC of Supplying and erecting Exhaust fan medium duty 230 V A.C. 50cycles 225 mm. 1400RPM with condensor complete erected in positionwith necessary materials. Fanmotor with moisture proof treatment and‘E’ class insulation and marking Sr. No. & date of erction.with Louvers to be erected in the aluminium frame. 357 Supply,Installation,Testing & commissioning of 9M Height Street Light Pole with singe arm without light fixture 358 Supply & installation of 120W LED flood light 359 Providing cement concrete foundation including excavation for the poles 60 cm x 60cm x deep 1/6 of pole length in 1:3:6 cement concrete (20 x 25 mm stone metal) and 45 cm x 45 cm x 45 cm /45 cm dia. x 45 cm. height plinth duly plastered and with necessary curingand finishing in an approved manner. (for above 9 m poles) 360 Supply,installation, testing and commissioning of Pole mounted Control Box weather proof hot moulded glass reinforced polyester pole mounting type with 25A SP MCB as a I/C &4 Nos. 10 A SP MCB as a O/G with elmex terminals suitable for termination of incoming & out going cables of 3.5 x 35sq.mm 1.1 Kv grade AL.armoured cable and 3 nos of 2.5 sq.mm copper conductor pvc insulated wires upto lamp &2 Nos. of 8 SWG G.I earthing wire with 2 Nos of25mm Dia.& 1mtr Long GI pipe for pole eathing buried in 1000mm below ground Level .complete in all respect.. 361 CABLE TRAY & TRUNKING 362 Trunking & Cable Tray. Supply Installation Testing Commissioning of readymade hot dip GI perforated 2mm Thk Trays with coupler Plates with Plated Nut Bolts for Tray Connection, PVC Gaskets at each bend & branching on which cables passes to avoid cutting of cables . Including Manufactured bends, Tees, Reducers as required. Mtre to be quoted with erection on provided supports as supply & erection of supports is considered seperately.But GI Hardwarefor fixing cable trays to be inculded. Including supply & erection of Rubber Pads between cable tray & supports along with green passivated GI plated nut bolts for connetion. 363 200X50 mm GI Perforated Cable Tray 364 300X50 mm GI Perforated Cable Tray 365 Trunking & Cable Tray. Supply Installation Testing Commissioning of readymade hot dip GI perforated 2mm Thk Trays with coupler Plates with Plated Nut Bolts for Tray Connection, PVC Gaskets at each bend & branching on which cables passes to avoid cutting of cables . Including Manufactured bends, Tees, Reducers as required. Mtre to be quoted with erection on provided supports as supply & erection of supports is considered seperately.But GI Hardwarefor fixing cable trays to be inculded. Including supply & erection of Rubber Pads between cable tray & supports along with green passivated GI plated nut bolts for connetion. 366 200X50 mm GI Perforated Cable Tray Cover 367 300X50 mm GI Perforated Cable Tray Cover 368 Supply and Installation of tie rod of 10 mm full threaded type with slotted channel as required for mounting of cable tray.Note- 1set include two nos of vertical rod and one horizontal slotted channel complete with anchoring in the ceiling. (For cable Tray support) 369 SITC of M.S fabricated supports for cable trays of M.S sections (ISA/ISMC/ISMB/Plates/Flats etc.) welded to structure / clamped to sturucture / wall, using anchor bolts where required including G.I. hardware & painting with Two coats of Red oxide primer &2 coats of enmel paint of approved shade. (colour As per Ex. Plant) (Fabrication & Erection to be quoted under erection under, supply include only steel supply.) 370 Supply, Installation, laying & terminating of GI Trunking 200X75 371 Supply, Installation, laying & terminating of GI Trunking 100X50 372 RACEWAY AND PVC CONDUITS 373 PVC conduits,Aluminium Raceway & Floor Junction Box: - Supplying, Installation, Testing & Commissioning of following G.I junciton boxes in floor of 14 SWG thick duly painted. The rate shall be inclusive of providing Sand, Cement etc. and finishing the same upto the floor level as per instructions of the Architect. MK make or equivalent Junction box 374 100 x 40 mm Aluminium raceways, 2mm thick. 375 Supplying and fixing Floor Junction Box (Weatherproof )with knock-outs on all sides suitable for Raceways/conduits. The knock out shall be removed at site as per requirements. The junction boxes shall be laid in trenches for Raceways/conduits . The top cover shall be fixed with counter sunk screws. (For floor trenches). 376 250x250mm 377 150x150mm 378 Providing & Fixing 2mm thick SS cover plates.Cover plates shall be champhered at all edges 379 250mm X 250mm X 2mm for tile mounting. 380 200mm X 200mm X 2mm for tile mounting. 381 Supply, Installation, laying & terminating of 25mm FR MMS ISI Mark PVC conduits in floor/ceiling with junction & complte with its all accessories. (Make- Precision or Equivalent ) 382 Supply, Installation, laying & terminating of 32mm FR MMS ISI Mark PVC conduits in floor/ceiling with junction & complte with its all accessories. (Make- Precision or Equivalent ) 383 Providing & fixing of Readymade Polycorbonate unbreakable Junction box with 15A, 4way connectors and knowout for 4 cable entry of following size. 384 100 x 100 x 50mm.IP65 385 150 x 150 x 50mm. IP65 386 300 x 300 x 50mm. IP65 387 EARTHING PROTECTION 388 SITC of Early Streamer Type Lightning arrester with Covering Protection Radius of 65 mtrs to be installed on top of the factory roof, with proper clamping of down earth conductor for connection of lightning arrestor to earth pit (supply of down conductor is considered in other item). with Event Counter etc complete. (Lightening Protection for Factory Area) (Similar to Make - Indelec, Protection Level II, ) 389 Supply, Installation ofAviation LED lamps or as per Direction by Engineer In Charge. Make - ISI Mark. 390 Earthing using maintenance free earth electrode with chemical treatment 3mtr. Long, inner pipe dia 40mm & outer pipe dia 80mm, Including boring of hole upto 6.5 mtrs. in all types of strata as required. The electrode shall be electrolytic grade GI tube pre-filled with hygroscopic powder and low resistive backfill material. (Earth Resistance value shall be achieved to less than 2 ohm) 391 Earthing using Maintenance free earth electrode with chemical treatment, 3mtr long, 32mm dia. high tensile, low carbon steel circular rod with molecularly bonded Copper of thickness 250 Micron on outer surface, 50x6mm Cu earthing strip from electrode terminal upto disconnecting link in chamber at top etc. Scope includes boring holeupto 6.5 mtrs in all types of strata as required. 392 Supply, fixing / placing of PVC pipe of 150mm dia.as casing to the earthing pit only for filling portion to retain surrounding soil. (Casing shall remain permanent for this filling area.) 393 Additional cost of Concrete inspection chamber with heavy duty concrete cover in lieu of brick masonary chamber & C.I. cover. Concrete chamber & cover shall be suitable for movement area / roads. 394 Supply, tagging, laying or fixing, testing of GI / CU earthing strip / wire in ground at a depth of 600mm including excavation in all type of strata except hard rock or in readymade trenches with necessary clamps, revette jointing as per specification complete as required. 395 32mm x 6mm thick GI strip. 396 25mm x 6 mm thick GI strip. 397 25 mm x 6 mm thick. Cu strip. 398 25mm x 3 mm GI Strip down conductor mounted on porcelain insulator for Lightning Arrestor. 399 Supply and installation of earth busbar box consisting of 50 x 6 mm, 300mm long GI. Strip with multiple tapping and nut bolt arrangements etc. mounted on SMC insulators. Box shall be fabricated from M.S. sheet including powder coated, clear acrylic hinged door etc. complete. 400 UPS SYSTEM 401 Supply,Installation, testing & commissioning of 3Phase Input & 3Phase Output UPS with 30 minutes Battery back up and sealed maintenance free lead acid maintained in battery racks complete with interconnections, Cu battery cables, Battery breakers. The rack shall be sturdy M.S. section fabricated with powder coatingThe scope shall include terminals & busbar shrouding for Battery terminals & connections. (Note:- Battery store shall start 150mm above FFL.) 402 1 No. x 30kVA UPS arrangement as per given specifications and details. 403 Supply, Installation of Sealed maintenance free valve regulated lead acid (VRLA) Battery (with reverse polarity protection MCCB) as per specifications complete suitable for following UPS sizes (Bidder should furnish the battery calculations for30 minutes backup along with the BOQ). Note: The scope also includes complete SITC of cables, DCDBs, DC MCBs, required for battery interconnection as well as interconnections betwwen batteries and UPS with required all accessories. 404 30 KVA UPS (30 minutes). 405 Installation of battery rack floor mounting as per specifications with necessary fabrication complete for following sizes. 406 30 KVA UPS (30 minutes). 407 DG SET 408 Supply, Transporation, Unloading at site , Installation , Testing and Commissioning of Silent Type Diesel Generating set (outdoor type) with AMF Function havingPower rating of ____ KVA, 415 Volts at 1500 RPM 0.8 Lagging power factor, consiting of the followings. The scope also includes the exhaust piping with Al cladding / insulation including the support structure of exhaust pipe as per CPCB norms & also obtaining approval /Permission from CPCB/Goverment electrical Inspector, Local Muncipal authority etc.DG set also iclude the fuel piping, First charging of Dry Batteries & First fill of Labrication oil.Diesel Engine: Diesel Engine: 4 stroke radiator cooled type with necessary fan, electric start with Electronic Governer, of suitable BHP at 1500RPM suitable for ____ KVA output of alternator at 45 degree C ,90% RH & 550 Meter MSL and confirming to BS 5514, BS 649, IS 10000, capable of taking 10% over loading for one hour after 12 hours of continious operation.The engine will be fitted complete with all the required accessories.The scope includes testing of engine.Alternator : Alternator rated at ____KVA, 415 Volts 50Hzat 1500 RPM,3 phase 50 Hz, AC supply with 0.8 lagging power factor at 45 degree C,90%RH & at 550 meter MSL. The alternator shall be SPDP enclosure, brushless, continious duty, self excited and self regulated through AVR confirming to IS 4722/BS2613 suitable for tropical conditions and with class F/H Insulation. The scope also includes required control cables between D.G. set to AMF panel to complete the works including required routine test at manufactures works & site test as per specifications. Adopter Box for cable termination with extension bus bars for termination suitable for Armoured cable power cables. 409 160 KVA D.G. Set with acoustic canopy, battery, AVM & 990Litre diesel tank etc. 410 LIFT WORK 411 10 Passenger/680 Kgs – 03 Stops – MRL Type Elevator Protection Independent Service (for Duplex only) Overload Device Nudging Emergency Car Light Unit Infrared Curtain Door Protection Door Time Protection Emergency Alarm Button Extra Door Time of Lobby & Parking Door Open/Close Button Manual Rescue Operation Belt Inspection Drive Auto Fan Cut Off) 412 Supply, installation, testing of set of Bulkhead fixture with 9 W LED or wattage as per lift vendor and 1 No. 5A, 3 pin socket + switch on common good quality board in lift pit. 413 Supply, fixing, testing, of good qualityindustrial interlocked switched sockets with MCBs of different ratings in readymade IP 65 Polycabonate unbreakable enclosure. Box should be suitable to terminate cables / wires easily, complete as required. 414 20A 1Ø, 3Pin Socket and plug with 20A SP MCB in a Readymade Box. 415 40/63 A 4 Pole RCCB 100mA + 25A DP MCB in single readymade box for lift machine room. 416 MISCELLANEOUS ITEMS 417 Supply, installation of material equipment required as per statutorial provision & safety. 418 1.1 kV class Handgloves pair. 419 Laminated First aid chart with frame. 420 First aid box. 421 High Voltage Electrical Insulation Synthetic Mats, ISI Marked,confirming to IS:15652-2006. Types: Class C; for 1100V, Flame Retardant, Shock Proof, 1000 mm in width, pastable, Acid/Alkali/Diesel/Oil Resistant, CPRI/ERDA tested & Approved, Black/Gray in color etc. 422 415V Dangerboards of appropriate size & marking. 423 NETWORKING & TELEPHONE SYSTEM 424 Supply,installation, laying and commissioningCat 6 UTP cablewith accessories i.e.conduit pipe, clamp etc.Complete 425 Supply, Installation testing and commissioningRJ-45 Cat-6 Information Outlet with face plate with accessories i.e.conduit pipe,clamp etc. 426 Supply,installation, laying and commissioningCat 6 UTP cablewith accessories i.e.conduit pipe,clamp etc. Complete 427 Supply, Installation testing and commissioning RJ-11 Information Outlet with face plate 428 Supply, Installation testing and commissioning Cat-6 Patch cord 2 meter at user end 429 Supply, Installation testing, jumpering and commissioning50 +50 Pair MDF Box with krone module 430 Supply, Installation testing and commissioning50 Pair riser Cable with termination,punching & jumpering of telephone cable 431 Supply Installation Testing Commissioning of42U rack or as per Direction by Engineer Incharge. 432 Supply, Laying, termination & Commissioning of RG-6 TV CABLE 433 Supply, Installation, Termination & Commissioning ofTV socket termination box with blank PVC cover plate and GI Box . 434 SITC RJ-4,Boot Cover 435 Providing & Fixing LIU Loaded 436 Providing & Fixing Fiber Patch Cord 437 Providing & Fixing 6 Core MM FIBER Cable 438 Supply Installation testing & Commissiong offiber splicing for camera work (per pair) or as per Direction by Engineer In Charge. 439 Supply Installation testing & Commssiong of Fiber termination box for outdoor camera, or as per Direction by Engineer Incharge. 440 Supply, Installation, Testing & Commissioning of40mm HDPE pipe 441 Supply, Laying, termination & Commissioning of fully loaded patch panel. 442 Supply, Installation,Testing and Commissioning of Wi-Fi access point 443 Supply, Installation, Laying and Commissioning Cat 6 UTP cablefor Wi-Fi Router with accessories i.e. conduit pipe, RJ45, clamp etc. complete 444 Supply, Installation, Laying and Commissioning 12 core armoured Optical Fiber cable with accessories. 445 Supply, Installation, Testing & Commissioning of 40mm HDPE pipe 446 Providing & Fixing LIU Loaded 447 Supply Installation Testing & Commissioning of fiber splicing 448 Supply, Installation Testing and Commissioning 50 Pair riser Cable with Termination, Punching & Jumpering of telephone cable 449 PA SYSTEM 450 SITCceiling/wall mounted6Wspeakerwithline matching transformer including necessary accessories Make Honeywell 451 Supplyof Booster Amplifier for PA system with RMS output (actual) 480 W . 480W,Power reduction on backup power -1 dB,Frequency response ,60 Hz to 18 kHz (+1 / -3 dB at-10 dB ref. rated output,Distortion,<1% at rated output, 1 kHz,Max power consumption 1600 VA, Multiple outputs - 70 V / 100 V and 8/4 ohm,Temperature controlled forced front to back ventilation, directly stackable. Make BOSCH 452 SITCofSpeaker Cable2coreX1.5sqmm shielded Audiocable. Legrabd Make 453 Supply, Installation of 12 U rack for PA system 454 Table Top microphone with mounting stand. 455 CCTV WORK 456 Supply, installation, esting and commissioning of5 Megapixel Full HD Indoor Fixed Dome camera 457 Supply, installation, testing and commissioning of 5 Megapixel Full HD Indoor Fixed Bulletcamera 458 Supply, installation, testing and commissioning of 4 Megapixel PTZ Camera , 30X optical & 16X digitalZoom 459 Supply, Installation, Testing & Commissioning of NVR 32 CH with 80TB Storage 460 Supply, Installation, Testing & Commissioning of 49 LED Professional Monitor 461 Supply, Installation, Testing & Commissioning of4K HDMI Cable 10 Meter length 462 Supply, installation, testing and commissioning 12U Rack wall Mounting 463 POE Edge Switch 8 Port 464 Supply, installation, testing and commissioning of3KVA Online UPS 465 Supply,installation, laying and commissioningCat 6 UTP cable 466 Supply, Installation, Testing & Commissioning of 9 U Rack 467 Providing & fixing Cat 6 IO camera & rack side 468 Providing & fixing 24 port jack panel unloaded for outdoor rack ( Make-D-Link) 469 Providing & fixing SFP Transceivers oudoor switch & building switch 470 Providing & fixing 1000Base-T Copper SFP Transceiver (PC & NVR) 471 LIU Loaded 472 Fiber Patch Cord 473 Supply, Installation, Testing & Commissioning of 8 Port PoE Switchwith 2 SFP Ports (Industrial Grade) 474 Providing & Fixing 6 Core MM FIBER Cable 475 Supply Installation testing & Commissiong offiber splicing for camera work (per pair) or as per Direction by Engineer In Charge. 476 Supply Installation testing & Commssiong of Fiber termination box for outdoor camera, or as per Direction by Engineer Incharge. 477 Supply, Installation, Testing & Commissioning of Armoured CAT-6 Cable 478 Supply, Installation, Testing & Commissioning of Power Cable 3 C x 2.5 Sq. mm Armoured 479 Supply, Installation, Testing & Commissioning of40mm HDPE pipe 480 Providing cement concrete foundation including excavation for the poles 60 cm x 60 cm x deep 1/6 of pole length in 1:3:6 cement concrete (20 x 25 mm stone metal) and 45 cm x 45 cm x 45 cm /45 cm dia. x 45 cm. height plinth duly plastered and with necessary curing and finishing in an approved manner. (for above9 m poles) 481 Pole for Camera 482 Supply, Installation, Testing & Commissioning of Security Signage 483 SECUIRTY SYSTEM & EQUIPMNET 484 Supply, Installation, Testing & Commissioning ofX-ray Baggage Inspection System - Discription : Tunnel Size: 620mm×420mm, High-resolution 22” LED IPS color monitor, Bi-directional scanning, 64X User- selectable zoom, Automated Image archiving-upto 2,00,000 images., Configurable Image Processing Keys, Conveyor Speed -0.2 M/s. 485 Supply, Installation, Testing & Commissioning of walk through metal detector with cemera & superimposed data on video - 106F.Alarm - Acoustic and Optical alarm, height onperson bar display (Metal Locator), Metal Level Display - 12 LED based bar graph is provided in the console to display volume of the metal carried in GREEN, 2 Signal Processing - Microcontroller based with I2C interface, 486 Supply, Installation, Testing & Commissioning of Micro Controller Based with Standalone DVR + 1 TB HDD + 18.5 inch Monitor for walk through metal detector. 487 Supply, Installation, Testing & Commissioning of Ladies Frisking Booth. Diamention - Lenght-4ft 4 inch, Height - 6.5 ft, Width- 4ft 4 inch, Mild steel with powder coating material. 488 Supply, Installation, Testing & Commissioning of Padestrian Swing Barrier (Single Lane) with SS 304 Grade Cabinet - Matt finish with 520 mm passage, DC brushless Motor, & Acrylic flap + Safety Sensor Lane indicator on Top Cabinet With Tailgating feature 489 Supply, Installation, Testing & Commissioning of elescopic Boom Barrier length- 6mtrs, Operation time : 6 Sec, Drive : Electro-Mechanical, including Remote, Push Button, Pair of Photo Sensor, Base Plate, Boom & Boom Rest 490 Supply, Installation, Testing & Commissioning ofHand Held Metal Detector With Dry & Rechargeable battery & Charger 491 Supply, Installation, Testing & Commissioning of Red / Green LED Signages with installation bracket etc 492 CABLES : Supplying and laying in ready built-up trenches / excavated trenches, through hume pipes laid by other agencies / on walls or on walls of lift shafts or on columns or on ceiling using G.I. spacers and G.I. saddles / G.I clamps made fromG.I.strips, or on cable trays (cable tray supply & installation covered under item D.3) with nylon cable ties, the following XLPE insulated 1.1 KV grade, armoured and overall sheathed copper / aluminium conductor cables are made to IS:7098 (Part-l) 1988. Note: The quantity given in the quantity column is only indicative. The contractor shall bring to sitecables as per actual requirement. Note:A2XFY/A2XWY stands for aluminium conductor armoured XLPE cable, 2XWY stands for Copper Conductor armoured XLPE cable. 493 3C X 2.5 Sqmm. YY Cable 494 2C X 2.5 Sqmm. YY Cable 495 4C X 2.5 Sqmm. YY Cable 496 EndTermination:Supplying and making end terminal joints to the following 1.1 KV grade PVC insulated armoured overall sheathed copper / aluminium conductor XLPE cables, using nickle plated cable glands, copper compression type cable sockets, PVC insulating tapes, etc. 497 3C X 2.5 Sqmm. YY Cable 498 2C X 2.5 Sqmm. YY Cable 499 4C X 2.5 Sqmm. YY Cable 500 Supply,installation, laying and commissioningCat 6 UTP cablewith accessories i.e.conduit pipe, clamp etc.Complete 501 SAPPHIRE SYSTEM FOR SERVER ROOM 502 Supply, installation, testing & commissioning of the following items as mentioned below inlcuding necessary accessories as requires:Make: Kidde, Tyco, UTC, Siemens 503 Seamless cylinder of 80 Ltrs capctiy to store Sapphire Gas along with necessary MS painted stand & wall fixing bracket as requires to install the cylinder (Main Cylinder) 504 Novec 1230 Fluid factory 505 Electrical Actuator cum conventional fire alarm panel with a set of 6 nos. different type of detectors with cabling works, necessary terminal blocks, fire alarm with cross zoning funcion with built-in delay timer, Actuator should be capable to accept the signal from building Main Fire alarm panel. 506 Manual Release / Abort stations along with back box & necessary glass on top 507 Flase light fixture indicates in Bold Capital letters DO NOT ENTRE / EVACUATE, price should be inclusive of necessary lamp & fixing bracket as requires. 508 Discharge Nozzles of 3600 50mm dia 509 Electrical actuator panel suitable to accept signal from Main fire alarm. 510 Manifold with necessary male female connectors. 511 Flexible hose lines with necessary couplers (Male / female) 512 Pressure Switch 513 Piping,Fitting for 80 Ltrs with all ACCESSORIES 514 Seamless MS painted Piping, fittings & supports, etc.Price should be inclusive of all necessary fixing accessories, joints, bends, couplers, paintaings as requires. Make:Jindal/Tata 515 32 mm dia. 516 PEST REPELLENT SYSTEM 517 Supply, installation, testing & commissioning of the Ultrasonic repellent system comprisies of following Make: C-System, Maser 518 Master consol for generating high frequency sound waves i.e. 20KHz to 50KHz as requres with adjustable nobe, power supply card etc. 519 Satellites connected with each master consol 520 2 core x 1.5 Sqmm FRLS PVC Copper cable existing in conduit along with all accessories. 521 Hooter 522 WATER LEAK DETECTION SYSTEM 523 Supplying, installing, testing and commissioning of Water leak detection control panel of 4 zone type consisting with features like, Auxiliary alarm contacts, Monitored alarm outputs,Open & short circuit line monitoring, Bright LEDs for indication. Panel shall have lockable enclosure. The panel shall work on 230v AC & also should have built in battery back up.The panel shall have accept / reset / aknowkedge buttons and it shall be wall mounted type. 524 Supplying, installing, testing and commissioning of Electronic Hooter for water sensing indication. 525 Water leak sensing cable twisted of 15 mts. long, mechanically strong, resistant to corrosion and abrasion. The cable shall be constructed with two sensing wires,an alarm signaling wire and an continuity wire and all shall be in a fluoropolymer carrier ( OR equi. material).The cable shall have factory installed connectors that can help to plug other cable together for extension. The cable shall be rugged in construction, no metal exposes, enables it to be reusable even in corrosive environment. Quoted price shall inclusive of all fixing accessories, end caps and probes (if required). 526 VESDA SYSTEM 527 Supply, installation, testing and commissioning of followings: System shall be BMS compatible for remote monitoringMake : VESDA, Honeywell, Schrack Seconet 528 VESDA Laser Compact (VLC 800) 529 Power Supply Unit for above Detection system 530 Aspiration Tubes 531 Capillary Tubes 532 Air Termination (Nozzles) 533 Electronic Hooter 534 Supplying, installing, testing and commissioning approved make 16 SWGMS conduits on ceiling / wall / floor etc. complete with accessories like, Junction boxes, Collars, Bends etc. 535 25 mm dia. 536 FIRE ALRAM SYSTEM 537 S/I/T/C of 04 Loop Addressable Fire Control Panel, Make Honeywell Morley UL Approved, 538 S/I/T/Cof Repeater Panel Make Honeywell Morley UL Approved 539 S/I/T/C of Addressable Multisensor/ Photoelectric Detector with mounting base Make Honeywell Morley 540 S/I/T/C of AddressableHeat Detector Make Honeywell Morley UL Approved 541 S/I/T/C of Addressable Response Indicator. 542 S/I/T/C of Addressable Manual Call Point. 543 S/I/T/C of AddressableStob Light Hooter 544 S/I/T/C of Addressable IsolatorModule 545 S/I/T/C of Addressable Module 546 S/I/T/C of Addressable Control Module. 547 Supply & installation of Beam Detector Six levels of sensitivity,Fully integrated infrared sensing, Mounting Base for below false ceiling (Make.- Honeywell Morley or Equivalent) 548 Supply and Laying 2 Core x 1.5 sq. mm Polycab Make, Copper Armored Cable. 549 Supply & Installation of UPS / BATTERY of Exide co. 550 FIRE FIGHTING SYSTEM 551 FIRE PUMP ROOM 552 S/I/T/C of Electric Motor Driven Fire Pump set of 1600 LPM @ 56 m head, with Bronze Impeller, Motor, Coupling, Base Plate and foundation bolts matching flanges with gasket and fastners wth all complete. 553 S/I/T/C of Diesel Engine Driven Fire Pump set of 1600 LPM @ 56 Mtr head with Bronze Impeller, Engine, Base plate, coupling with coupling guard, foundation bolts, automatic air release valve, fuel tank with engine exhaust line silencer, matching flanges with gasket and fastnersand battery with battery charger including 100% standby 554 S/I/T/C of Electric Motor Driven Jockey Fire Pump set of 280 LPM & 70 Mrs. Head with Bronze Impeller, Motor, Base Plate, foundation bolts and matching flanges with gasket and fastners. 555 S/I/T/C of Electric Driven Booster Pump of cast iron body and Bronze Impeller with stainless steel shaft, mechanical seal and floor of 900 LPM & 35 m conforming to IS:5120 suitable HP, SQ cage induction motor suitable for opeMtrion on 415 Volts. 556 S/I/T/C of Diesel Engine Starter Control Panel Solid-State, as per Spec. Wall mounted type for the Auto& Manual OpeMtrions of the Pump set, etc, along with the Battery Charger Power & ControlCabling from the Engine to Control Panelwith Earthing & Inter-locking, having, Fuses AC / DC type, P.L.C.Based, Switches, Meters, Audio / Visual Alarms and IndicatingLamps, with Analogue Solid State Designs, with 3 Cold Impulses Starter for Deisel Engine of StandbyPumpset with Sequential OpeMtrion Circuitries. 557 Providing & Fixing of Fire Water Tank Model No. ZA07R2 Metal Storege 50 Kl CapicityZnAI Tank. FM Approved Dia (Mtr) 6.46 Height (Mtr) 2.10 Gross Value ltr 68,795, each Tank Tank shall Included wall, self Supporting Dome roof 2 Nos of HDG Nozzel F&B type level Indicator Turbine vent (SS) Access hatch on Roof of TAnk External Cage Laddder & International Rope Ladder with Installation as per Installed JNPT Project. 558 SITC of Pressure Gauges with Syphon Tube and Cock 150mm Dial Range - 0 to 1kg /cm2. 559 SITC of Pressure Switches with Tubing, Control Cabling upto Panel, complete. 560 SITC of MS ERW Piping as per IS : 1239,part-I, heavy grade up to 150 NB and IS:3589, 6.35 mm thickness, including pipe fittings ,flanges, pipe supports such as c clamps, threaded rods, fastners. 561 200 mm NB C Class 562 150 mm NBC Class 563 100 mm NB C Class 564 80 mm NB C Class 565 65 mm NB ‘C’ Class 566 Supplying and erecting G.I. pipe ‘C’ class ERW 50 mm dia with necessary fittings duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-PP 567 25 mm NB C Class 568 SITC of double flanged wafer type lever operated / wheel operated Butterfly valve of 200 psi Mtring including matching flanges, bolts/studs, nuts, washers & gaskets. 569 Supplying and erecting 200 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure Mtring, as per specification no. FF-VL/BFV 570 Butterfly Valve 150 mm dia with matching flange, nut & bolt etc. Make Marc/Turbo/ Normex /Equvt 571 Supplying and erecting 100 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure Mtring, as per specification no. FF-VL/BFV 572 Supplying and erecting 75/80 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure Mtring, as per specification no. FFVL/BFV 573 Supplying and erecting 65 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure Mtring, as per specification no. FF-VL/BFV 574 SITC of 150 NB Four way Fire Brigade Inlet Connection having inbuilt non. return valve with 04 nos. of 63 mm GM instantaneous inlets for fire water tank. 575 SITC of Non Return Valves Dual plate with Matching Flanges, bronze internal, EPDM seat, 200 psi Mtring, suitable horizontal & vertical installation. 576 Supplying and erecting 150 mm dia cast iron double flange ball type NRV complete with PN16 pressure Mtring, as per specification no. FF-VL/NRV 577 Supplying and erecting 100 mm dia cast iron double flange ball type NRV complete with PN16 pressure Mtring, as per specification no. FF-VL/NRV 578 SITC of Non Return Valves Dual plate with Matching Flanges, bronze internal, EPDM seat, 200 psi Mtring, suitable horizontal & vertical installation.65 mm NB 579 SITC of Air Vessel Tank 300 NB x 1.2 mtrs. 580 SITC of Ball Valve 581 Providing and fixing 50 mm Ball Valve with complete with PN16 pressure Mtring, as per specification no. FF-VL/BV 582 Supplying and erecting 25 mm Ball Valve complete with PN16 pressure Mtring, as per specification no. FF-VL/BV 583 Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV 584 Cabling from motor toStarter with copper earthling Strip within the pump house 585 Supplying and erecting 200 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure Mtring, screen of SS end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Mtrio) for positive suction complete as per specification no. FF-VL/ELS 586 Supplying and erecting 100 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure Mtring, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Mtrio) for positive suction complete as per specification no. FF-VL/ELS 587 SITC of MS ERW Black Pipe as Per IS : 3589 / 6.3mm thick & IS 1239 / II C Class, with fittings IS 1239/II heavy grade including MS plate fabricated flange to ASA 150 LBS Mtring with accessories plus consumable for Underground pipes protection with by coating & wrapping with anticrrosive tape complete with required structural support if any as per spec 588 150 mm NBC Class 589 100 mm NB C Class 590 80 mm NB ‘C’ Class 591 SITC of MS ERW Black Pipe as Per IS : 3589 / 6.3mm thick Gr. Fe 410 & IS 1239 / I- C Class, with Fittings to suiitable pipe Fabricated IS : 3589 / 6.3mm thick / IS : 1239 / II - Heavy Grade, including MSPlate Fabricated Flanges to IS / DIN / ASA 150 LBS Mtring & Above ground Pipe Protection (Painting)and all required supports etc. 592 150 mm NBC Class 593 100 mm NB C Class 594 80 mm NB ‘C’ Class 595 Butterfly Valve 150 mm dia with matching flange, nut & bolt etc. Make Marc/Turbo/ Normex /Equvt 596 SITC of oblique type stainless steel single headed hydrant valve with 63mm female instantaneous outlet angled towards ground as per IS 5290-Type A, including matching flanges ,bolts ,studs, nuts, washers, gaskets. 597 External 598 Internal 599 SITC of stainless steel body Orifice plate of suitable inner bore along with matching flange. 600 SITC of M. S. Hose Box of size 750 x 600 x 250mm-16swg thick fire red color from outside & white enamal from inside - front glass paited with fire with key, handle and brass hinges -to accommodate 2 nos of 15mtrs long hose and 1 branch pipe. 601 External 602 Internal 603 SITC of 63mm dia stainless steel universal branch pipe as per IS 2871 604 SITC of Fire fighting hose as per IS 14933 ( Type -A) . The fire hose shall be 15 mtrs long with 63mm dia stainless steel couplings at both end 605 15 m Long 606 SITC of GM air release valve . 607 Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV 608 Supplying and installing wall mounting swinging hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose) alongwith necessary accessories complete as per specification no. FF-FFA/HV 609 Supplying and erecting 25 mm Ball Valve complete with PN16 pressure Mtring, as per specification no. FF-VL/BV 610 SITC of 150NB Four way Siamese Connection for hydrant network with 4 nos. of 63 mm instantaneous inlets in glass fronted wall box having inbuilt non return valve and 150mm BFV with fittings, nut, bolts & washers. 611 Supplying and erecting 150 mm dia cast iron double flange ball type NRV complete with PN16 pressure Mtring, as per specification no. FF-VL/NRV 612 Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 450mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete 613 SITC of M.S fabricated supports for cable trays of M.S sections (ISA/ISMC/ISMB/Plates/Flats etc.) welded to structure / clamped to sturucture / wall, using anchor bolts where required including G.I. hardware & painting with Two coats of Red oxide primer &2 coats of enmel paint of approved shade. (colour As per Ex. Plant) (Fabrication & Erection to be quoted under erection under, supply include only steel supply.) 614 FIRE SPRINKLER SYSTEM 615 Supplying, erecting, testing and commissioning of Upright/ Pendent quartzoid bulb sprinkler, 15 mm (½) dia. NBCM Body chrome finished, 68º C fixed tempeMtrure Mtring with deflector disc of conventional construction complete as per specification no. FF-SPR./UP 616 SITC of SS Flexible Drop 1500mm/1200mm Length along with fitting materials. 617 SITC of MS ERW Black Pipe as Per IS : 3589 / 6.3mm thick Gr. Fe 410 & IS 1239 / I- C Class, with Fittings to suiitable pipe Fabricated IS : 3589 / 6.3mm thick / IS : 1239 / II - Heavy Grade, including MSPlate Fabricated Flanges to IS / DIN / ASA 150 LBS Mtring & Aboveground Pipe Protection (Painting) and all required supports etc. 618 100 mm NB C Class 619 80 mm NB ‘C’ Class 620 65 mm NB ‘C’ Class 621 40 mm NB ‘C’ Class 622 32 mm NB ‘C’ Class 623 25 mm NB ‘C’ Class 624 Supplying and erecting, testing and commissioning of 150 mm dia. installation control valve (Alarm Valve) of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch,cock valve complete with drain valve and bypass, test control box, ball valves, MS pipes of required size, flanges, orifice plate, gasket etc. complete as per specification no. FF-VL/ICV 625 Supplying and erecting 200 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure Mtring, as per specification no. FF-VL/BFV 626 Butterfly Valve 150 mm dia with matching flange, nut & bolt etc. Make Marc/Turbo/ Normex /Equvt 627 Supplying and erecting 100 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure Mtring, as per specification no. FF-VL/BFV 628 Supplying and erecting 75/80 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure Mtring, as per specification no. FFVL/BFV 629 SITC of Water flow switch of 80 mm 630 Supplying and erecting 25 mm Ball Valve complete with PN16 pressure Mtring,as per specification no. FF-VL/BV 631 SITC of Pressure Gauges with Syphon Tube and Cock 150mm Dial Range - 0 to 1kg /cm2. 632 FIRE EXTINGUISHER 633 Clean gas Agent ( NAF P IV ) 634 Co2 type of Fire extinguisher of 4.5 Kg cap. complete ready for use as per IS 2171 having ISI Mark /Seasfire 635 Supply and installation of Ceiling mounted, self activated FE-36 type, 10 kgs capacity Fire Extinguisher with self spary sprinker, fixed with pressure discharge horn, wall brackets or floor MS supportcomplete with necessary mounting base. 636 Providing and fixing fire bucket and stand as per site requirementor as per directed by engineer in charge. 637 Supply, installation, Testing & commissioning 9L K Type Fire extingusher ISI Markor as per direction by Engineer In Charge 638 Supply, installation, Testing & commissioning of Evacation map A3 Sizeos per design & Drawing or as per direction by Engineer In Charge 639 Supply, installation, Testing & commissioning of autoglow Sinagesos per design & Drawing or as per direction by Engineer In Charge 640 Supply, installation, Testing & commissioning of LED Fire exit sinagesos per design & Drawing or as per direction by Engineer In Charge Make - Prolight or Equivalent 641 MULTIMEDIA SYSTEM 642 Providing & Fixing Multimedia System at Control Room :- 643 Videowall Display 55 inch IPS panel, 700 Nits, Bezel Width -0.88 mm (Bezel to Bezel), WebOS, SoC, HDMI, DP, DVI-D, RGB, Audio, USB, Seamless Large Screens with Extreme-Narrow Bezel, Higher / Wider Viewing Angel, Clear & Flawless Vision, Smart Calibration, Clear View with Non-glare Panel,Operation Hours 24x7 (LG Make Model No 55VH7F) 644 Providing & Fixing of Bracket LVW12-55T offers you an extremely easy installation experience you had never been through. With the creative scale design and connecting mounting slot, the mounts installation and alignment became reproducible. The LVW12-55T is not only easier to install; it offers the installer endless possibilities through their nearly seamless chainable design structure. Oversized displays and unique visual digital signage applications require mounts that won’t restrict the creative process. Made of quality steel, with pop-out extension arms provide a quick access and easy maintenance, the LVW12 Series has been designed for longevity and versatility. (lUMI Make Model No. LVW12-50T) 645 Providing & Fixing of Presentation Switcher•5x2 Conference Collaboration Switcher 2HDMI/1VGA/1 Type-C/Wireless Presentation With 2 USB Host •Multiview presentation with configurable screen layout.•BYOD receiver with Airplay Mirroring, Miracast and USB Dongle supported.•Supports USB extension and switching control among three USB hosts.•Input :- 1 x VGA;2 x HDMI; 1 x USB-C•Output:- 2 x HDMI Matrix•Plug and Play, free configuration, easy installation Dongle•Single Click displays host PC content on the Display (100-150ms latency)(Pixelfly Make Model No WPS42U+WDG) 646 Providing & Fixing HDMI Face Plate VTwo port HDMI & USB wall Plate - HDMI & USB female to female , coupler type - White (Logic Make Model No. 771726) 647 Providing & Fixing of Speaker•RMS Power :-60 W•Max. Power :-120 W•Sensitivity (1W/1m) :-90 dB•Ingress Protection rating :-IP3x•Frequency :-Range (-10 dB) 120 Hz - 20 kHz Response (± 3 dB) 150 Hz - 20 kHz Audec Make Model No. Kyra 6 648 Providing & Fixing Amplifier•RMS Power :- @ 8 Ω Bridge 300 W•Inputs :-Sensitivity (1W/1m) 0 dB (1V RMS)Impedance :-12 kΩ balancedConnector:- XLR female with Male Linkthrough•Signal / Noise :- > 90 dB•Protection :- DC Short circuitOver heatingOver loadSignal limiting•Frequency :- Response (± 3 dB)20 Hz - 20 kHz( Audec Make Model No Epa 254) 649 Providing & Fixing Media Player X88 Pro® ‎Cortex A9 4K Media Player, 4GB Ram 32 GB ROM, RK3318 Quad Core Processor, H.265 Decoding, 2.4G/5.8GHZ Dual Wifi Supports, (MAVS-MP4K) 650 Providing & Fixing Signage License Cloud Managed Digital Signage License For 3 Yrs (Plus TV 3 Yrs) 651 Providing & Fixing HDMI Cable High Speed HDMI Cable With Ethernet Channel, HDMI Male to Male, Shielded, Black, 15 m (50 ft.)(Manhatten Make Model No 323260) 652 Providing & Fixing USB Active Cable, A Male to B Male, 15 m (50 ft.), Black (Manhatten Make Model No 152389) 653 Providing & Fixing Multiple Cables And Connectors For Videowall (Manhatten Make) 654 Providing & Fixing AV Rack Make Valrack Model No -6U 655 Installation Charges With Cable Dressing, Cable Labelling And Installation Of All The Equiprment As Per The Item Mention In BOW Other Than Any Civil Work 656 Programming Charges of Systems 657 Providing & Laying 2 Core x 1.5 Sqmm Copper Cable with 25 MM Conduit. 658 Supply, laying and commissioningCat 6 UTP cablewith accessories i.e.conduit pipe,clamp etc. 659 Supplying, installing, testing and commissioning of aconsisting of modular, 2 nos of 6A 5-pin sockets and 1no 16A SP switch along with front plate. The rate should include supplying & interconnecting PVC insulated 2Rx2.5sq.mm copper FRLS conductor wires for phase &1Rx2.5sq.mm. for earthing copper FRLS conductor wires and suitable switch box for switch and sockets. The whole cluster shall be measured as one number.(Make- Legrand or Equivalent ) 660 Description Same as AboveLooping from Primary point. ( Consider As a Secondary Point)(Make- Legrand-or Equivalent ) 661 Providing & Fixing of Queue Manager Stainless Steel Height 900mm Dia of Base 350mm Heavy Duty of Euronics Make. 662 SIGNAGES & LOGO 663 EntranceGate Branding3D Signage : Prototyping supply installation & commissioningletters made of 18 gauge thick S.S.316 material laser cut outwith 75mm x 18 gauge thick side patti brazing for box type 3D Letters with backside S.S.Scrue brazing for fitting arrangment , front side attached 3mm thick040 acrylic laser cutout letters with male female fitting.all letter polish & rose colour PU coated as per your requirment.Letter bottam side attached 5mm S.S. laser cut PU coated plate for fitting arrangment.All letter inside samsung moduler LED Light for glow.All inculisive of Transpot Labour mechanical cutting Drillding , Making holes etc completed 664 Entry Gate Logo : Prototyping supply installation & commissioning logo & letters made of 18 gauge thick S.S.316 material laser cut outwith 40mm x 18 gauge thick side patti brazing for box type 3D Letters with backside S.S.Scrue brazing for fitting arrangment .& Logo fitted on 30Ø S.S. Base plate with PU coating Colour as per artwork.All inculisive of Transpot Labour mechanical cutting Drillding , Making holes etc completed.Size: 36Ø 665 Latter in English : Prototyping supply installation & commissioning logo & letters made of 18 gauge thick S.S.316 material laser cut outwith 40mm x 18 gauge thick side patti brazing for box type 3D Letters with backside S.S.Scrue brazing for fitting arrangment .& Logo fitted on 30Ø S.S. Base plate with PU coating Colour as per artwork.All inculisive of Transpot Labour mechanical cutting Drillding , Making holes etc completed. Latter Size: 4.4 666 Latter in Marathi : Prototyping supply installation & commissioning logo & letters made of 18 gauge thick S.S.316 material laser cut outwith 40mm x 18 gauge thick side patti brazing for box type 3D Letters with backside S.S.Scrue brazing for fitting arrangment .& Logo fitted on 30Ø S.S. Base plate with PU coating Colour as per artwork.All inculisive of Transpot Labour mechanical cutting Drillding , Making holes etc completed. Latter Size: 6.25 667 Entry Gate Logo: Prototyping supply installation & commissioning logo & letters made of 18 gauge thick S.S.316 material laser cut outwith 40mm x 18 gauge thick side patti brazing for box type 3D Letters with backside S.S.Scrue brazing for fitting arrangment .& Logo fitted on 30Ø S.S. Base plate with PU coating Colour as per artwork.All inculisive of Transpot Labour mechanical cutting Drillding , Making holes etc completed. Size: 60Ø 668 Latter in Marathi : Prototyping supply installation & commissioning logo & letters made of 18 gauge thick S.S.316 material laser cut outwith 40mm x 18 gauge thick side patti brazing for box type 3D Letters with backside S.S.Scrue brazing for fitting arrangment .& Logo fitted on 30Ø S.S. Base plate with PU coating Colour as per artwork.All inculisive of Transpot Labour mechanical cutting Drillding , Making holes etc completed. Latter Size : 7.8 669 Latter in English : Prototyping supply installation & commissioning logo & letters made of 18 gauge thick S.S.316 material laser cut outwith 40mm x 18 gauge thick side patti brazing for box type 3D Letters with backside S.S.Scrue brazing for fitting arrangment .& Logo fitted on 30Ø S.S. Base plate with PU coating Colour as per artwork.All inculisive of Transpot Labour mechanical cutting Drillding , Making holes etc completed. Latter Size : 7.6 670 Parabolic Signage : Design, Manufacture,display,Installation of hanging type LED Illuminited sign/Direction board in Parabolic & Eliptical (half ,semi & full) shape.Aluminium Alloy (6063-T6) extruded Anodised profile use for outer & nylon bracket for internal structure holding & heatsinks fitting. The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2mm/3mm thickness. The text/ Graphics matter visibility shall not be less than 160˚. The approved colour text and graphics shall be printed/router cut on monomeric calendered vinyl of 70μm thickness and shall be firmly pasted on display sheets.Provision for 24 x 24mm aluminium profile attachment for bottam hanging & top side Tie arrangment. .The signage shall have the integal mounting arrangments with strudy structural frame & ACP Cladding on the backside of signage to avoid rusting and entry of dust.The LED Board shall have25x 26mmheat sinks with multiangle attachment for LED & for nylon bracket. Uniform illumination with 4-8W/Sq.ft and with brightness more than ambient light. Suitable size end cap of 1.5mm thick S.S 304 should be provided. 671 Brass -Prototyping supply installation & commissioning single side nameplate Signages shall be made of 25mm thick pi shape extruded 6063 -T6 aluminium profile of 2mm wall thickness.two 3 mm internal ribs shall be provided for corner locking the profile shall Gold/ Sliver/ Black anodised 15micron dept.The display shall be 3mm thick aluminium sheet with PU Coated in black colour with aproved text in 4mm Brass cutout laser cut letter with gold plating & lacqur coating fittted on aluminium plate.The signage shall be provided wih trarded S.S.Stud welded at the backside of the wall mounting Rate Inclusive of Base plate & Hindi English Letters as Design & Directed by Architect 672 Advnace Modular Cabin Name plate Shall be made of hollow 19 ±1.0mm thick black anodised extruded aluminium frame& wall thickness of 1.7mm.The frame joining side cap shall be of moulded nylon -6material .name plates (3 ,4 wide) shall be held together by a 9mm dumbell sleeve inserted in the circular grooves of the name plate.This assembly of name plates shall be inserted in the groove of the frame.The approved text will be computer cut on Gold coloured vinyl and pasted on the name plates as per the approved artwork.2mm thick clear acrylic plates shall be inserted in the grooves of name plates to protect the matter from dust & Vandalism. 673 ARCHITECTURE, DESIGNING & DRAWINGS 674 Architecture, Desing & Drawing Architecture Designing, Drawing, Presentation, Detailing, Estimation and Material Selection for Civil, Electrical, Furniture, Plumbing, PA system, acces control system and Data communication works. Coordination with consultants and vendors involved in project. The 30% payment will be released after acceptance of presentation & submission of Architectural drawings and balance installments will be equally paid on monthly basis.

INR 23600 /-

Refer document

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB