}

Tender For The Work Of Reconstruction Of 11/Lt Kv Lines In M & R Scheme Which Fallen Due To Different Reason Under Eudd- Hathras - Safe Carriage Of Following Material From Electricty Store Center Hathras To Pit Site Of Work Through The Kacha And Pakka Roa, hathras-Uttar Pradesh

Dakshinanchal Vidyut Vitran Nigam Limited has published Tender For The Work Of Reconstruction Of 11/Lt Kv Lines In M & R Scheme Which Fallen Due To Different Reason Under Eudd- Hathras - Safe Carriage Of Following Material From Electricty Store Center Hathras To Pit Site Of Work Through The Kacha And Pakka Roa. Submission Date for this Tender is 11-09-2025. Overhead Line Tenders in hathras Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

51007580
Tender For The Work Of Reconstruction Of 11/Lt Kv Lines In M & R Scheme Which Fallen Due To Different Reason Under Eudd- Hathras - Safe Carriage Of Following Material From Electricty Store Center Hathras To Pit Site Of Work Through The Kacha And Pakka Roa
Tender
Indian
Uttar Pradesh
Hathras
11-09-2025

Tender Details

Tender For The Work Of Reconstruction Of 11/Lt Kv Lines In M & R Scheme Which Fallen Due To Different Reason Under Eudd- Hathras - Safe Carriage of following material from Electricty store center Hathras to Pit site of work through the Kacha and Pakka road includingloading and unloading at the respective ends including the cost of arrangement of labour, T&P, etc. which required for proper completion of work.(Distance 00-50 Kms.) 2 8.5 Mtr. long PCC Poles. 3 9/11 Mtr. S.T. Poles 4 11 KV X-Arms, weasal conductor, G.I wire,Disc Insulators, Pin insulators, clamps and otherrequired line material, if any. 5 Replacement of damaged 8.5 Mtr. long PCC pole by digging of pits in kharanja/mettalic road and dismantling of all 11KV/LT accessories from the existing / damaged pole and errection of single new pole including Fixing of all accessories. 6 Replacement of damaged 9/11 Mtr.Long ST pole by digging of pits in kharanja/mettalic road and dismantling of all 11KV/33 KV accessories from the existing / damaged pole and errection of single newSTP pole including Fixing of all accessories. 7 Straightening of tilted single PCC Poles in the existing lines as per direction of supervising engineer. 8 Straightening of tilted single ST Poles in the existing lines as per direction of supervising engineer. 9 Straightening of tilted Double Poles in the existing lines as per direction of supervising engineer. 10 Replacement offollowing damaged accessories in 11 KV /LTline - 11 11 KV X-Arms, 11 KV Pin Insulators with Pin &Nut &Bolt , F Clamp 12 11 KV Disc Insulator With Fiting 13 Fixing of T. Channel 14 Errection and grouting of stays complete as per RESPO Norms and as per direction of supervising engineer with Grouting material i.e. cement, sand, brick ballast/stone ballast etc. shall be arranged by the contractor at his own cost. 15 Laying, sagging and stringing and Nozzling / binding etc. ofnew &old ACSR Weasal conductor / GIin 11 KV / LT lines as per RESPO manual and as per direction of supervising engineer. 16 ACSR Weasel conductor 17 ACSR Dog / Racoon Conductor 18 50/95/120 sqmm. Areal Bunch Conductor 19 Removal of Damaged/Burned LT dustribution boxes & fixing of New at already/Newly errected pole for giving supply to consumer by connecting consumer cables by using appropriated alumunium lugs tape N & B provided by conractor as per requirement. 20 Re- sagging and stringing of existing following conductor in HT /LT line as per direction of supervising engineer. 21 ACSR Weasel conductor 22 50/95/120 sqmm. Areal Bunch Conductor 23 ACSR Dog Conductor 24 Cutting, chopping, triming of tree branches to clear the line route to give2 mtr. horizontal and vertical clearance to the line coming in the route ofdifferent feeders as per direction of supervising engineer 25 Re Guarding / Guarding of 11 KV line by laying, stringing, sagging and binding of 2 Nos. parallel GI wire 6 SWG after providing, fabrication and fixing of guarding angle and fabrication and fixing of X-guards (Tillis) of GI wire at distance of 3 Mtr. 26 Digging of proper size of pit for following work of damaged steel support with the provision of temporary support :-Then reinforcement of steel support by welding of 04 Nos. 2 feet long M.S. angle iron of 50x50x6 mm. at equal distance around each pole & also welding of these angle iron with each other by providing M.S. flat of size 35x6 mm. in round. 27 Construction of round plinth around the S.T. Poles / RS Joists / Rails will be done with cement, sand and concrete in 1:3:6 ratio of size 450 mm. dia & 600 mm height (300 mm. under the ground + 300 mm. the ground). The plinth should be plastered with ½ inch thick cement and sand of ratio 1:4 & taper rounding the upper most part of the plinth. The rate will include all cost of material, labour and T&P etc. for completion of the above work which will be provided by the contractor at his own cost.

Key Value

Document Fees
INR 1180 /-
Tender Value
Refer document

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail