|
| 1 | S/F of 100 mm × 110 mm shackle insulator/100 mm × 80 mm pin insulator(S.I. No. 621) |
| 2 | Supply and fixing of 230 mm × 32 mm × 1.5 mm galvanised steel strips including holes for shackle insulators pins and bolts etc. complete in all respect. (S.I. No. 622) |
| 3 | Supply and erection of \"D\" clamps of 50 mm × 6 mm flat iron on steel tubular poles / steel rail poles with bolts, nuts etc. complete in all respects including painting with aluminium paint. (S.I. No. 623) |
| 4 | S/E of O/H lines with ACSR conductor `weasel\" on poles including binding &jumpering complete in all respects (S.I. No. 627) |
| 5 | Tightening of O/H lines with ACSR conductor `weasel\" on poles including binding &jumpering complete in all respects (S.I. No. 627 LR) |
| 6 | S/E of overhead line with G.I. wire on 8 SWG, GI wire on poles including binding complete in all respects (S.I. No. 628) |
| 7 | S/E of hexagonal / cradle type gaurd of G.I. wire no. 8 to 4 SWG including binding etc./ five line spacer between ACSR conductor complete in all respects(S.I. No. 629) |
| 8 | S/E of stay set at 3.5 Metres away from the pole complete with galvanised 19 mm dia × 1.80 Metre long stay rod, 30 cm × 30 × 6.3 mm anchor plat, thimble stay clamps, stay insulator, 19 mm 600 mm double screw tightener, 7/3.5 mm G.I. stay wire etc. in 1:3:6 cement concrete in all respects. (S.I. No. 631) |
| 9 | Painting of pole with 2 coats of Aluminum paint over Red Oxide primer complete in all respects.(S.I. No. 634) |
| 10 | Supply and fixing of LED Street Light Fitting having die cast Aluminium body and diffuser with driver set suitable for 110 to 130 watt. Confirming to IP 65 and above protection complete in all respect. (S.I. No. 23.17) |
| 11 | Supply and burring of Safe Earthing Electrode T-39, (Hot Dip Galvanized), Length up to 2000mm, outer door pipe 76mminner Dia 38 mm, terminal Dia 12mm, outer GI pipeof 16 SWG and inner GI pipe of 12 SWG with Hot Dip Galvanization up to 100 micron filled with crystallineconductive mixture (CCM) having anti corrosive & conductive propertywith 50 kgs activatedsoil(BFC) capable of reducing the soil resistivity with good mixture of retainingcapacity along with 30 cm square C.I. frame with hinged cover & masonry housing. (from apron to switch board, of 25mm x 3mm G.I. stripwill be extra) make as App. in UP PWD & CPRI Certified (S.I. No. 725 A) |
| 12 | S/F of 1 No. 8 SWG GI wire in 15 mm dia GI pipe for earthing laid in ground or in wall duly from concealed including the cost of cement, sand, labour, T & P other material required for proper completion of the work as directed at site.(S.I. No. 721) |
| 13 | Labour charge for dismentling / fixing of LED street light 110 to 130 Watt (S.I. No. 1424 LR) |
| 14 | S/F of Potted driver set for LED s suitable for LED light(App. In Mandi) |
| 15 | S/F of single protected device (SPD) for LED light (App. In Mandi) |
| 16 | S/F of 63 Amp. 415 V metal clad TPN rewirabletype switch fuse unit on angle iron bracket complete in all respect Cat. B(S.I. No. 316 ) |
| 17 | S/f of 100 Amp four pole change over switch on 50mm x 50mm x 6 mm angle iron frame, including the cost of labour, T&P, painting and other material required required for proper completion of work as per direction and satisfaction of E/I (S.I. No. 378 ) |
| 18 | Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fitting includind trenching (75 cm deep) and re-filling etc as required.100 mm dia (S.I. No. DSR 14.13.3) |
| 19 | Supply and laying of G.I. pipe including labour T&P etc complete in all respect.(a) 65 mm dia (Civil DSR 18.12.7) |
| 20 | Supply and laying of aluminium conductor PVC insulated armored served sheathed cables 1100 Volts grade at depth of 750 mm below ground level over a cushion of 75mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on MS clamps etc. of suitable size or as directed by the Engineer-In-charge, complete in all respect. The armoring of the cable shall be properly connected with the earth conductor by clamps etc.(a) 16 sq. mm 2 core (S.I. No. 20a.1.2) |
| 21 | (b) 16 sq. mm 4 core (S.I. No. 20a.1.9) |
| 22 | (c) 25sq. mm 2 core (S.I. No. 20a.1.10) |
| 23 | (d) 95 sq. mm 3.5 core (S.I. No. 20a.1.14) |
| 24 | (e) 150 sq. mm 3.5 core (S.I. No. 20a.1.16) |
| 25 | (f) 185 sq. mm 3.5 core (S.I. No. 20a.1.17) |
| 26 | Supply and wiring of sub main with 2 Nos 2.5 sqmm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in 20mm dia PVC pipe 2 mm thick on surface with 1 No. 14 SWG copper earth continuity wire including matching colour wash etc., complete in all respects. (S.I. No. 1301 C) |
| 27 | S&F surface/flush mounting 8 ways SPN distribution board with additional metal door without MCB complete in all respect, as directedbyEngineer in charge. Cat. A(S.I. No. 1024 A) |
| 28 | S&F of 6 Amp to 32 Amp. MCB (10 KA) C Curve Cat. A (S.I. No. 1002) |
| 29 | S&F of6 Amp. to 32Amp. DP MCB (10 KA) C CurveCat. A(S.I. No. 1009) |
| 30 | S/F of 500 Amp. 415 Volt heavy Duty Double Break HRC Fuse type metal clad TPN complete with HRC Fuse etc. on angle iron frame complete in all respect. (S.I. No. 350) |
| 31 | S/B of 600 mm × 600 mm × 6 mm GI plate vertically for earthing with its top at least 3 m below ground level with 20 mm dia GI pipe & funnel for watering. One earthing lead of 1 No. 8-10 SWG GI wire in 15 mm dia G.I. pipe up to switch board (from apron to switch board, the cost of GI pipe & GI wire will be extra) 30 Cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150 mm thick alround etc. as per direction of E/I complete in all respect as per drawingFor Pole(S.I. No. 702) |
| 32 | S/ of ceilling Fan 1200 mm(S.I. No. 1501i) |
| 33 | Supply and fixing of LED tubeLight with batten suitable for up to 1x22W LED Tube light complete including tube etc on surface complete in all respect. (S.I. No. 23.07) 5 Year Warranty |
| 34 | Supply and fixing of recess/surface mounting round 24 Watt to 32 Watt LED Down Lighter having Powder coated die cast aluminium housing with extended heat sink diffuser/reflector and driver set complete in all respects.CAT.AAA (S.I. No. 1404) |
| 35 | Supply and fixing of Copper Cable 4.0 sq. mm. 4 Core.(S.I. No. 289 C) |
| 36 | Supply and fixing of automatic street light cubicalcontrol panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contractors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect 25 A TPN(S.I. No. 807 e ii) |
| 37 | Supply and fixing of Factory wired integral LED Flood Light lumaniries with die cast Aluminium housing build with driver set suitable for 170 to 200 watt. Confirming to IP 66 protection complete in all respect. CAT.AAA(S.I. No. 23.26) |
| 38 | Labour charge for raising lowering and other rectification of High Mast (S.I. No. Appd.) |
| 39 | Supply and erection for factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmeter, selector switches for ammeter and voltmeter instrument, fuses current transformers etc. The board shall have suitable capacity electrolytic aluminum bus bars as per IS: 8623 insulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/DMC supports with detachable side covers and shall be suitable for extension on the sides. The switches shall be complete with suitable cable and boxes, reverse entry boxes in case of pedestal type, cable sockets, compression glands and indicating lamp on incoming etc. The job includes the grouting of the board as per direction of Engineer-in-charge. All outgoing switches of 100 Amp. And above will be provided with ammeter, current transformers and selector switches etc. and instrument fuses etc. The switch board shall be galvanized with CRCA sheet with a minimum thickness of 1.6mm / 2mm cubicle type switch board shall be of cat. A.B & B-II and pedestal type for cat. C only.Cubicle type Cat B INCOMING 200 Amp. TPN-1NoOUTGOING (i) 63 Amp. TPN -03Nos (ii) 63 Amp. TPN- 01Nos S.I.No. 20.1.2 (b)+ 323 Cat. B |
