Interior Fitout Work For Creation Of Workspace For Centralized Transport Noc (Tx Noc) And Nr Noc At Office Of Railtel, Shastri Park, Delhi Civil Work, Electrical, Modular Furniture, Hvac, Fighting, Fire Alarm, It, Audio Video, Epbax Etc; 15.7.4 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. CUM 5.00 2060.2 ₹ 10,301.00 15.25 In cement mortar SQM 30.00 266.45 ₹ 7,993.50 15.41 Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. Sqm 350.00 56.35 ₹ 19,722.50 15.57 Dismantling aluminium/ Gypsum partitions, doors, windows,fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. Sqm 221.00 56.35 ₹ 12,453.35 15.18 Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. Kg 40.00 5.65 ₹ 226.00 1.1.18 Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. cum 20.00 494.10 ₹ 9,882.00 Flooring work 4.2 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 4.2.5 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) Cum 64.25158 9311.4 ₹ 5,98,272.14 4.14 Extra for concrete work in superstructure above floor V level for each four floors or part thereof. Cum 64.25158 169.45 ₹ 10,887.43 2 11.41A Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. 11.41A.3 Glazed Vitrified tiles Matt/Antiskid finish of size 11.41A.3.2 Size of Tile 600 x 1200 mm sqm 1037.938 1797.3 ₹ 18,65,485.29 3 MR Supply & installation Ancient alley of 100% commercial grade nylon carpet tile of 500x1000mm of solution dyed PRO-CARE Fiber Nylon (or equivalent), with construction as tufted carpet tile having anti-microbial protection using PRO-CARE AG+ guard. The tile shall have a pile weight of 23 oz/yd², pile height 6.0 ± 0.5 mm, and total height 9.5 ± 0.5 mm, with a non-woven soft backing for superior comfort and acoustic insulation. The carpet shall meet or exceed international safety and performance standards including flammability (ASTM E648) – Class 1, smoke density (ASTM E662) – Passed, color fastness (GB 3920) – Passed, SVHC REACH compliance (235 items – Not Detected), phthalates (EN 14372) – Passed, anti-fungal activity (AATCC TM174) – 0 Grade, stain resistance (AATCC TM175) – 9 Grade, TVOC (California Specification 01350) – Low, heavy metal (EU RoHS Directive) – Not Detected, and anti-static walking test (GB/T-18044) – ≤3kV. SQM 150 ₹ 0.00 4273 640950 MR Supply & installation of laminate wooden flooring of size 1292x193mm (Classic format) with a total thickness of 8mm, conforming to Class of Use 32 as per EN 13329 for moderate commercial applications. The flooring shall have a coreboard of HDF+ (E1, CARB2/TSCA VI compliant) and feature the Aqua CLIC it! locking profile. The product must be waterproof, tested for 24-hour water resistance according to ISO 4760, with a qualitative rating < 3 after re-drying and a quantitative rating of ≤ 0.3 mm swelling, with no water leakage. The flooring shall have abrasion resistance rating of AC4 (≥ 4,000 cycles, ISO 24338), fire classification Cfl-s1 (EN 13501-1), slip resistance DS ≥ 0.3 (EN 13893), thermal conductivity of 0.13 W/(m*K) (EN 12667), and impact resistance of ≥35mm (small ball) and ≥600mm (big ball) tested as per EN 17368 and EN 13329 Annex C. Thickness swelling must be ≤ 18% (ISO 24336), and static indentation by constant pressure must be ≤ 0.05 mm (ISO 24343-1). Resistance to staining shall comply with EN 438-2 with performance level 5 for group 1 & 2 and level 4 for group 3. The product shall show no change in appearance or damage under furniture leg impact (EN ISO 16581) and withstand castor chair test for 15,000 cycles (EN ISO 4918). Sqm 61.075 ₹ 0.00 5500 335912.5 MR ALUMINIUM SKIRTING: Supply of 100mm Aluminium (Grade 6063) Skirting with 15 micron anodising In Natural Finish. Thickness 1.30 to 1.50mm. Designed to conceal screws. Seamless finish. Complete with Rubber/ PVC Jointers and Gasket. RMT 107.695 ₹ 0.00 250 26923.75 Ceilings BAFFLE CEILING: Providing & fixing polylam blades vertical & horizontal baffle system, exhibiting space-delineating characteristics. The system comprises baffles 50mm wide & 100 Deep thickness of minimum 0.5mm GMS, installed at 150mm C/C. The C shaped shaped carrier rails run perpendicular to themain baffles profiles. Individual baffle lengths between 300 and 2400 mm can be selected. Baffle are supplied with the end cap matching the similar finish of baffle. Tolerances according to TAIM, DIN EN 13964 and quality controlled to ISO 9001:2015 approved by SIS. Substructure for POLYLAM® VerƟcal baffle system consisƟng of C shape carrier of minimum 1.2mmthickinstalled perpendicularly to baffles, same was hanged to wall with the help of wall anchor fasteners. Baffles to be connectedperpendicular to C shaped carriers with the help of baffle hanger brackets. The primary profiles must be connected to oneanother with longitudinal splice connectors. C shaped baffle carriers to be installed at maximum distance of 1200mm. in a length of 2400 mm baffles.Manufacturer shall have the fully automatic powder coating system with power and free conveyorize 3mtr/minute capacity. Powder coating plant shall be equipped with latest modern technology with fully automatic inline Pre-treatment using nano technology, Inline automatic water Drying system after pre-treatment. Mode of Measurements: Measurements shall be wall to wall without any deductions for lights, diffuses, columns etc.. IN WOODEN FINISH sqm 10 ₹ 0.00 4500 45000 GYPSUM BOARD CEILING: Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels 12.45.1 12.5mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) sqm 500 1355.8 ₹ 6,77,900.00 MR Providing the gypsum single sided cove of 150mm x 150mm having a facia of 75mm to macth the specifications same as gypsum ceiling. Rm 153.7095 ₹ 0.00 300 46112.85 .... more in document
