|
| 1 | Dismantling fencing wire mesh, any type. |
| 2 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground.(Post embedded in concrete, brick work masonary) |
| 3 | Dismantling of brick work or stone/ boulder masonry built in cement or cement lime mortar, including all quoins, arches, pillars, etc. as per the directives of EIC. |
| 4 | Demolition of Reinfiorced Cement Concrete (Reinforcement cut as required to facilitate demolition)) in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work. |
| 5 | Demolition ofCement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for. |
| 6 | Dismantling wrought iron or mild steel work of any description not otherwise provided for. |
| 7 | Excavating in trenches, in soft/loose soil; n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out. |
| 8 | M & L, Hardcore (Broken stone or boulders) of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface. |
| 9 | M & L, Cement concrete Type C2 1:3:6 (40 mm graded aggregate) in foundations, filling and mass concrete. |
| 10 | M&L Brickworks in cement mortar with subclass \"B\" bricks in Cement mortar (1:4 cement mortar) straight or curved on plan exc 6 m mean radius. |
| 11 | M & LCement concrete (Cast-in-Situ) Type B1, 1:2:4 (20 mm graded aggregate) in copings and the like including weathering, slightly rounded or chamfered angles and throating, including formwork and finishing of exposed faces of concrete as directed. |
| 12 | Boring holes 300mm dia, 3 m deep in soil for two under-reamed piles and getting out and disposal of spoil to a distance of n exc. 50 m. |
| 13 | M & L,providing reinforced cement concrete (design mix) M-25 (20mm graded aggregate) in Foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc.; basement slabs, under-reamed piles and mass concrete. |
| 14 | M & L, Providing reinforced cement concrete (design mix) M-25 (20mm graded aggregate) in columns, pillars, piers, posts and struts etc. |
| 15 | M&L, Providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area exc 100 sq. cm but not exc 250Sqcm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed |
| 16 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, rough finished surfaces of concrete flat. |
| 17 | Formwork to side of pillars, posts, struts, piers, columns and stanchions, rough finished surfaces of concrete flat. |
| 18 | M & L, Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 19 | M & L, Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 20 | S & F, Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. for supporting chain link and existing/ new RCC post conforming to Fe.290.Gde-E-165. |
| 21 | S&F, Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165. |
| 22 | S&F, Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete and similar work conforming to (Fe.410-W. Gde-E-250) quality A. |
| 23 | Supply only Chain link MS galvanised fencing, any size or type. |
| 24 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire. |
| 25 | S&F RBT (Reinforced Barbed Tape) horizontal wire medium bladed profile (medium barbs sapcing 34 (+/-1) c/c ,length 22(+/-1)mm, width 15(+/-1), spring core {of diameter 2.56(+/-0.02)mm spring steel, cold drawn conforming to IS-4454 (part-1) :2001 wire of high tensile strength of min 165 kg/sqmm } with tape [{.54(+/-0.02)mm thk, cold rolled corbon steel elctro -galvanised coating local 12 micron & average 20 micron thick, mat finish and min. weight 43.478 gm/m}]. tied on vertical portion of existing Y shaped angle iron fixed on top of brick wall ) approx 1.5m apart and on over hanged angle iron fixed on upper side of wall (Projected from wall) approx. 1.50m apart with G.I staple and GI clips (steel grade-A (fe-410WA), hot dip/ electro galvanised coating min 20micron thick) to retain horizontal, including necessary bolts etc and provision (like drilling holes or notch etc.) for securing hrorizontal RBT, all complete as per direction of EIC. |
| 26 | M & LRendering 15mm thick cement plaster 1:4 on fair faces of brick work or concrete surfaces and rendreing is to be finished even and smooth without using extra cement. |
| 27 | Preparation of new wall surface including cracks filling up to 3mmplastered or unplastered brooming down etc and apply two coats of cement paintover one coat of alkali resistant priming paint. |
| 28 | M&L Preparation of new steelsurfaces of any description over 10 cm in width/girth and applying two coat of aluminium paints over one coat of aluminium red oxide priming coat. |
| 29 | S&F, 40mm dia Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/ sq. cm for weep holes as per requirement. |
| 30 | Removing building materials etc.to a distance of 1.5Km or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination. |
